![David The Fire Thief](http://resinclad.com/cdn/shop/products/Davidthefirethief_375x.jpg?v=1630687840 375w,//resinclad.com/cdn/shop/products/Davidthefirethief_410x.jpg?v=1630687840 410w,//resinclad.com/cdn/shop/products/Davidthefirethief_520x.jpg?v=1630687840 520w,//resinclad.com/cdn/shop/products/Davidthefirethief_576x.jpg?v=1630687840 576w,//resinclad.com/cdn/shop/products/Davidthefirethief_768x.jpg?v=1630687840 768w,//resinclad.com/cdn/shop/products/Davidthefirethief_992x.jpg?v=1630687840 992w,//resinclad.com/cdn/shop/products/Davidthefirethief_1024x.jpg?v=1630687840 1024w,//resinclad.com/cdn/shop/products/Davidthefirethief_1280x.jpg?v=1630687840 1280w)
![David The Fire Thief](http://resinclad.com/cdn/shop/products/Davidthefirethief2_375x.jpg?v=1630687840 375w,//resinclad.com/cdn/shop/products/Davidthefirethief2_410x.jpg?v=1630687840 410w,//resinclad.com/cdn/shop/products/Davidthefirethief2_520x.jpg?v=1630687840 520w,//resinclad.com/cdn/shop/products/Davidthefirethief2_576x.jpg?v=1630687840 576w,//resinclad.com/cdn/shop/products/Davidthefirethief2_768x.jpg?v=1630687840 768w,//resinclad.com/cdn/shop/products/Davidthefirethief2_992x.jpg?v=1630687840 992w,//resinclad.com/cdn/shop/products/Davidthefirethief2_1024x.jpg?v=1630687840 1024w,//resinclad.com/cdn/shop/products/Davidthefirethief2_1280x.jpg?v=1630687840 1280w)
David The Fire Thief
from $9.99
Comes in 32mm or 75mm scale
Like this model? Click here to check out the rest of our collection from White Werewolf Tavern
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
White Werewolf Tavern
@WWTavern
If you would like to follow or support this artist, please check out the links below.
patreon.com/whitewerewolftavern
www.instagram.com/wwtavern
myminifactory.com/users/WWTavern
facebook.com/miniatures3d
twitter.com/tavernww
![Deadly Deer Bundle](http://resinclad.com/cdn/shop/products/720X720-deadlydeerbundle_375x.jpg?v=1628642844 375w,//resinclad.com/cdn/shop/products/720X720-deadlydeerbundle_410x.jpg?v=1628642844 410w,//resinclad.com/cdn/shop/products/720X720-deadlydeerbundle_520x.jpg?v=1628642844 520w,//resinclad.com/cdn/shop/products/720X720-deadlydeerbundle_576x.jpg?v=1628642844 576w,//resinclad.com/cdn/shop/products/720X720-deadlydeerbundle_768x.jpg?v=1628642844 768w,//resinclad.com/cdn/shop/products/720X720-deadlydeerbundle_992x.jpg?v=1628642844 992w,//resinclad.com/cdn/shop/products/720X720-deadlydeerbundle_1024x.jpg?v=1628642844 1024w,//resinclad.com/cdn/shop/products/720X720-deadlydeerbundle_1280x.jpg?v=1628642844 1280w)
![Deadly Deer Bundle](http://resinclad.com/cdn/shop/products/DeerArcher_375x.png?v=1628642844 375w,//resinclad.com/cdn/shop/products/DeerArcher_410x.png?v=1628642844 410w,//resinclad.com/cdn/shop/products/DeerArcher_520x.png?v=1628642844 520w,//resinclad.com/cdn/shop/products/DeerArcher_576x.png?v=1628642844 576w,//resinclad.com/cdn/shop/products/DeerArcher_768x.png?v=1628642844 768w,//resinclad.com/cdn/shop/products/DeerArcher_992x.png?v=1628642844 992w,//resinclad.com/cdn/shop/products/DeerArcher_1024x.png?v=1628642844 1024w,//resinclad.com/cdn/shop/products/DeerArcher_1280x.png?v=1628642844 1280w)
Deadly Deer Bundle
from $4.99
Base Size: 25mm
Base Style: Leafy Rocks
Bundle includes all 5 Deer models and 1 Vines
Like this model? Click here to check out the rest of our collection from Goon Master Games
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC. is a licensed distributor of these 3D prints designed by:
Goon Master Games
@GoonMasterGames
If you would like to follow or support this artist, please check out the links below.
patreon.com/GoonMasterGames
instagram.com/GoonMasterGames
myminifactory.com/users/GoonMasterGames
![Death Hornet Bundle](http://resinclad.com/cdn/shop/products/Ugnix_DeathHornet_AllOutWar_375x.png?v=1671555662 375w,//resinclad.com/cdn/shop/products/Ugnix_DeathHornet_AllOutWar_410x.png?v=1671555662 410w,//resinclad.com/cdn/shop/products/Ugnix_DeathHornet_AllOutWar_520x.png?v=1671555662 520w,//resinclad.com/cdn/shop/products/Ugnix_DeathHornet_AllOutWar_576x.png?v=1671555662 576w,//resinclad.com/cdn/shop/products/Ugnix_DeathHornet_AllOutWar_768x.png?v=1671555662 768w,//resinclad.com/cdn/shop/products/Ugnix_DeathHornet_AllOutWar_992x.png?v=1671555662 992w,//resinclad.com/cdn/shop/products/Ugnix_DeathHornet_AllOutWar_1024x.png?v=1671555662 1024w,//resinclad.com/cdn/shop/products/Ugnix_DeathHornet_AllOutWar_1280x.png?v=1671555662 1280w)
Death Hornet Bundle
from $7.99
Base Size: 35mm
Base Style: Nebula - Ugnix Base
Bundle includes both models
Like this model? Click here to check out the rest of our collection from Cast n Play
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Cast n Play
@CastnPlay
If you would like to follow or support this artist, please check out the links below.
patreon.com/CastnPlay
instagram.com/CastnPlay
myminifactory.com/users/CastnPlay
facebook.com/CastnPlayMinis
youtube.com/castnplay
![Deathly Cannon Skeleton](http://resinclad.com/cdn/shop/products/DeathlyCanonSkeleton_CastNPlay_375x.png?v=1671565755 375w,//resinclad.com/cdn/shop/products/DeathlyCanonSkeleton_CastNPlay_410x.png?v=1671565755 410w,//resinclad.com/cdn/shop/products/DeathlyCanonSkeleton_CastNPlay_520x.png?v=1671565755 520w,//resinclad.com/cdn/shop/products/DeathlyCanonSkeleton_CastNPlay_576x.png?v=1671565755 576w,//resinclad.com/cdn/shop/products/DeathlyCanonSkeleton_CastNPlay_768x.png?v=1671565755 768w,//resinclad.com/cdn/shop/products/DeathlyCanonSkeleton_CastNPlay_992x.png?v=1671565755 992w,//resinclad.com/cdn/shop/products/DeathlyCanonSkeleton_CastNPlay_1024x.png?v=1671565755 1024w,//resinclad.com/cdn/shop/products/DeathlyCanonSkeleton_CastNPlay_1280x.png?v=1671565755 1280w)
Deathly Cannon Skeleton
from $9.99
Base Size: 50mm
Base Style: Cursed Crew Base
Bundle includes all 3 models
Like this model? Click here to check out the rest of our collection from Cast n Play
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Cast n Play
@CastnPlay
If you would like to follow or support this artist, please check out the links below.
patreon.com/CastnPlay
instagram.com/CastnPlay
myminifactory.com/users/CastnPlay
facebook.com/CastnPlayMinis
youtube.com/castnplay
![Deer](http://resinclad.com/cdn/shop/products/DeerBundle_375x.jpg?v=1650030337 375w,//resinclad.com/cdn/shop/products/DeerBundle_410x.jpg?v=1650030337 410w,//resinclad.com/cdn/shop/products/DeerBundle_520x.jpg?v=1650030337 520w,//resinclad.com/cdn/shop/products/DeerBundle_576x.jpg?v=1650030337 576w,//resinclad.com/cdn/shop/products/DeerBundle_768x.jpg?v=1650030337 768w,//resinclad.com/cdn/shop/products/DeerBundle_992x.jpg?v=1650030337 992w,//resinclad.com/cdn/shop/products/DeerBundle_1024x.jpg?v=1650030337 1024w,//resinclad.com/cdn/shop/products/DeerBundle_1280x.jpg?v=1650030337 1280w)
![Deer](http://resinclad.com/cdn/shop/products/Deer1_375x.jpg?v=1650030339 375w,//resinclad.com/cdn/shop/products/Deer1_410x.jpg?v=1650030339 410w,//resinclad.com/cdn/shop/products/Deer1_520x.jpg?v=1650030339 520w,//resinclad.com/cdn/shop/products/Deer1_576x.jpg?v=1650030339 576w,//resinclad.com/cdn/shop/products/Deer1_768x.jpg?v=1650030339 768w,//resinclad.com/cdn/shop/products/Deer1_992x.jpg?v=1650030339 992w,//resinclad.com/cdn/shop/products/Deer1_1024x.jpg?v=1650030339 1024w,//resinclad.com/cdn/shop/products/Deer1_1280x.jpg?v=1650030339 1280w)
Deer
from $8.99
Size:
Deer 1 - 39.5mm x 33mm x 50mm
Deer 2 - 37.5mm x 42mm x 47.5mm
Deer 3 - 31.5mm x 55.5mm x 34.5mm
Deer 4 - 38.5mm x 46.5mm x 40mm
Bundle includes all 4 models
Like this model? Click here to check out the rest of our collection from 3DIPStudios
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
3DIPStudios
@3DIPStudios
If you would like to follow or support this artist, please check out the link below.
instagram.com/3dipstudios
![Demodogs](http://resinclad.com/cdn/shop/products/resize-demodogs-castnplay_375x.jpg?v=1646939003 375w,//resinclad.com/cdn/shop/products/resize-demodogs-castnplay_410x.jpg?v=1646939003 410w,//resinclad.com/cdn/shop/products/resize-demodogs-castnplay_520x.jpg?v=1646939003 520w,//resinclad.com/cdn/shop/products/resize-demodogs-castnplay_576x.jpg?v=1646939003 576w,//resinclad.com/cdn/shop/products/resize-demodogs-castnplay_768x.jpg?v=1646939003 768w,//resinclad.com/cdn/shop/products/resize-demodogs-castnplay_992x.jpg?v=1646939003 992w,//resinclad.com/cdn/shop/products/resize-demodogs-castnplay_1024x.jpg?v=1646939003 1024w,//resinclad.com/cdn/shop/products/resize-demodogs-castnplay_1280x.jpg?v=1646939003 1280w)
Demodogs
from $6.49
Base Size: 35mm
Base Style: Cave Base - Hero
Bundle includes both models
Like this model? Click here to check out the rest of our collection from Cast n Play
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Cast n Play
@CastnPlay
If you would like to follow or support this artist, please check out the links below.
patreon.com/CastnPlay
instagram.com/CastnPlay
myminifactory.com/users/CastnPlay
facebook.com/CastnPlayMinis
youtube.com/castnplay
![Demon Knight](http://resinclad.com/cdn/shop/products/Demon_Knight_375x.jpg?v=1669823292 375w,//resinclad.com/cdn/shop/products/Demon_Knight_410x.jpg?v=1669823292 410w,//resinclad.com/cdn/shop/products/Demon_Knight_520x.jpg?v=1669823292 520w,//resinclad.com/cdn/shop/products/Demon_Knight_576x.jpg?v=1669823292 576w,//resinclad.com/cdn/shop/products/Demon_Knight_768x.jpg?v=1669823292 768w,//resinclad.com/cdn/shop/products/Demon_Knight_992x.jpg?v=1669823292 992w,//resinclad.com/cdn/shop/products/Demon_Knight_1024x.jpg?v=1669823292 1024w,//resinclad.com/cdn/shop/products/Demon_Knight_1280x.jpg?v=1669823292 1280w)
![Demon Knight](http://resinclad.com/cdn/shop/products/Demon_KnightB_375x.jpg?v=1669823293 375w,//resinclad.com/cdn/shop/products/Demon_KnightB_410x.jpg?v=1669823293 410w,//resinclad.com/cdn/shop/products/Demon_KnightB_520x.jpg?v=1669823293 520w,//resinclad.com/cdn/shop/products/Demon_KnightB_576x.jpg?v=1669823293 576w,//resinclad.com/cdn/shop/products/Demon_KnightB_768x.jpg?v=1669823293 768w,//resinclad.com/cdn/shop/products/Demon_KnightB_992x.jpg?v=1669823293 992w,//resinclad.com/cdn/shop/products/Demon_KnightB_1024x.jpg?v=1669823293 1024w,//resinclad.com/cdn/shop/products/Demon_KnightB_1280x.jpg?v=1669823293 1280w)
Demon Knight
from $9.99
Base Size: 35mm
Base Style: Plain Round
Like this model? Click here to check out the rest of our collection from Galaad Miniatures
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Galaad Miniatures
@GalaadMiniatures
If you would like to follow or support this artist, please check out the links below.
patreon.com/galaad
facebook.com/galaadminiatures
instagram.com/galaad_miniatures
myminifactory.com/users/galaad
![Demon Lord](http://resinclad.com/cdn/shop/products/DemonLord_375x.png?v=1634221554 375w,//resinclad.com/cdn/shop/products/DemonLord_410x.png?v=1634221554 410w,//resinclad.com/cdn/shop/products/DemonLord_520x.png?v=1634221554 520w,//resinclad.com/cdn/shop/products/DemonLord_576x.png?v=1634221554 576w,//resinclad.com/cdn/shop/products/DemonLord_768x.png?v=1634221554 768w,//resinclad.com/cdn/shop/products/DemonLord_992x.png?v=1634221554 992w,//resinclad.com/cdn/shop/products/DemonLord_1024x.png?v=1634221554 1024w,//resinclad.com/cdn/shop/products/DemonLord_1280x.png?v=1634221554 1280w)
Demon Lord
from $28.99
Size: 81.5mm x 165mm x 105mm
Base Style: Specialized
Like this model? Click here to check out the rest of our collection from Goon Master Games
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Goon Master Games
@GoonMasterGames
If you would like to follow or support this artist, please check out the links below.
patreon.com/GoonMasterGames
instagram.com/GoonMasterGames
myminifactory.com/users/GoonMasterGames
![Demon Queen](http://resinclad.com/cdn/shop/products/Monster_375x.jpg?v=1633976984 375w,//resinclad.com/cdn/shop/products/Monster_410x.jpg?v=1633976984 410w,//resinclad.com/cdn/shop/products/Monster_520x.jpg?v=1633976984 520w,//resinclad.com/cdn/shop/products/Monster_576x.jpg?v=1633976984 576w,//resinclad.com/cdn/shop/products/Monster_768x.jpg?v=1633976984 768w,//resinclad.com/cdn/shop/products/Monster_992x.jpg?v=1633976984 992w,//resinclad.com/cdn/shop/products/Monster_1024x.jpg?v=1633976984 1024w,//resinclad.com/cdn/shop/products/Monster_1280x.jpg?v=1633976984 1280w)
![Demon Queen](http://resinclad.com/cdn/shop/products/MonsterB_375x.jpg?v=1633976984 375w,//resinclad.com/cdn/shop/products/MonsterB_410x.jpg?v=1633976984 410w,//resinclad.com/cdn/shop/products/MonsterB_520x.jpg?v=1633976984 520w,//resinclad.com/cdn/shop/products/MonsterB_576x.jpg?v=1633976984 576w,//resinclad.com/cdn/shop/products/MonsterB_768x.jpg?v=1633976984 768w,//resinclad.com/cdn/shop/products/MonsterB_992x.jpg?v=1633976984 992w,//resinclad.com/cdn/shop/products/MonsterB_1024x.jpg?v=1633976984 1024w,//resinclad.com/cdn/shop/products/MonsterB_1280x.jpg?v=1633976984 1280w)
Demon Queen
$15.99
Base Size: 43mm x 34mm x 29.5mm
Base Style: Specialized
Like this model? Click here to check out the rest of our collection from Galaad Miniatures
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Galaad Miniatures
@GalaadMiniatures
If you would like to follow or support this artist, please check out the links below.
patreon.com/galaad
facebook.com/galaadminiatures
instagram.com/galaad_miniatures
myminifactory.com/users/galaad
![Demonic Prisoner](http://resinclad.com/cdn/shop/products/444_DemonicPrisoner_375x.jpg?v=1648216778 375w,//resinclad.com/cdn/shop/products/444_DemonicPrisoner_410x.jpg?v=1648216778 410w,//resinclad.com/cdn/shop/products/444_DemonicPrisoner_520x.jpg?v=1648216778 520w,//resinclad.com/cdn/shop/products/444_DemonicPrisoner_576x.jpg?v=1648216778 576w,//resinclad.com/cdn/shop/products/444_DemonicPrisoner_768x.jpg?v=1648216778 768w,//resinclad.com/cdn/shop/products/444_DemonicPrisoner_992x.jpg?v=1648216778 992w,//resinclad.com/cdn/shop/products/444_DemonicPrisoner_1024x.jpg?v=1648216778 1024w,//resinclad.com/cdn/shop/products/444_DemonicPrisoner_1280x.jpg?v=1648216778 1280w)
Demonic Prisoner
$29.99
32mm scale
Like this model? Click here to check out the rest of our collection from Cast n Play
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Cast n Play
@CastnPlay
If you would like to follow or support this artist, please check out the links below.
patreon.com/CastnPlay
instagram.com/CastnPlay
myminifactory.com/users/CastnPlay
facebook.com/CastnPlayMinis
youtube.com/castnplay
![Dendroid Warrior Bundle](http://resinclad.com/cdn/shop/products/LabeledDendroids_375x.png?v=1661969172 375w,//resinclad.com/cdn/shop/products/LabeledDendroids_410x.png?v=1661969172 410w,//resinclad.com/cdn/shop/products/LabeledDendroids_520x.png?v=1661969172 520w,//resinclad.com/cdn/shop/products/LabeledDendroids_576x.png?v=1661969172 576w,//resinclad.com/cdn/shop/products/LabeledDendroids_768x.png?v=1661969172 768w,//resinclad.com/cdn/shop/products/LabeledDendroids_992x.png?v=1661969172 992w,//resinclad.com/cdn/shop/products/LabeledDendroids_1024x.png?v=1661969172 1024w,//resinclad.com/cdn/shop/products/LabeledDendroids_1280x.png?v=1661969172 1280w)
Dendroid Warrior Bundle
from $10.99
Comes in 32mm scale
Base Size: 30mm
Base Style: Specialized
Bundle includes all 6 models
Like this model? Click here to check out the rest of our collection from White Werewolf Tavern
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
White Werewolf Tavern
@WWTavern
If you would like to follow or support this artist, please check out the links below.
patreon.com/whitewerewolftavern
www.instagram.com/wwtavern
myminifactory.com/users/WWTavern
facebook.com/miniatures3d
twitter.com/tavernww
![Derros the Dwarf Fighter](http://resinclad.com/cdn/shop/products/Derrosbundle_375x.png?v=1678734523 375w,//resinclad.com/cdn/shop/products/Derrosbundle_410x.png?v=1678734523 410w,//resinclad.com/cdn/shop/products/Derrosbundle_520x.png?v=1678734523 520w,//resinclad.com/cdn/shop/products/Derrosbundle_576x.png?v=1678734523 576w,//resinclad.com/cdn/shop/products/Derrosbundle_768x.png?v=1678734523 768w,//resinclad.com/cdn/shop/products/Derrosbundle_992x.png?v=1678734523 992w,//resinclad.com/cdn/shop/products/Derrosbundle_1024x.png?v=1678734523 1024w,//resinclad.com/cdn/shop/products/Derrosbundle_1280x.png?v=1678734523 1280w)
![Derros the Dwarf Fighter](http://resinclad.com/cdn/shop/products/WoW-DerroP102_375x.png?v=1678734538 375w,//resinclad.com/cdn/shop/products/WoW-DerroP102_410x.png?v=1678734538 410w,//resinclad.com/cdn/shop/products/WoW-DerroP102_520x.png?v=1678734538 520w,//resinclad.com/cdn/shop/products/WoW-DerroP102_576x.png?v=1678734538 576w,//resinclad.com/cdn/shop/products/WoW-DerroP102_768x.png?v=1678734538 768w,//resinclad.com/cdn/shop/products/WoW-DerroP102_992x.png?v=1678734538 992w,//resinclad.com/cdn/shop/products/WoW-DerroP102_1024x.png?v=1678734538 1024w,//resinclad.com/cdn/shop/products/WoW-DerroP102_1280x.png?v=1678734538 1280w)
Derros the Dwarf Fighter
from $6.49
32mm Scale
Base Size: 25mm
Base Style: Assorted Bases - Ground
Bundle includes all three models
Like this model? Click here to check out the rest of our collection from
Black Skull Studio
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Black Skull Studio
@BlackSkullStudio
If you would like to follow or support this artist, please check out the link below.
instagram.com/blackskull.studio
twitter.com/BlackSkullMX
![Desert Wyrm](http://resinclad.com/cdn/shop/products/421_DesertWyrm_375x.jpg?v=1648064474 375w,//resinclad.com/cdn/shop/products/421_DesertWyrm_410x.jpg?v=1648064474 410w,//resinclad.com/cdn/shop/products/421_DesertWyrm_520x.jpg?v=1648064474 520w,//resinclad.com/cdn/shop/products/421_DesertWyrm_576x.jpg?v=1648064474 576w,//resinclad.com/cdn/shop/products/421_DesertWyrm_768x.jpg?v=1648064474 768w,//resinclad.com/cdn/shop/products/421_DesertWyrm_992x.jpg?v=1648064474 992w,//resinclad.com/cdn/shop/products/421_DesertWyrm_1024x.jpg?v=1648064474 1024w,//resinclad.com/cdn/shop/products/421_DesertWyrm_1280x.jpg?v=1648064474 1280w)
Desert Wyrm
$39.99
32mm Scale
Size: 80mm tall
Like this model? Click here to check out the rest of our collection from Cast n Play
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Cast n Play
@CastnPlay
If you would like to follow or support this artist, please check out the links below.
patreon.com/CastnPlay
instagram.com/CastnPlay
myminifactory.com/users/CastnPlay
facebook.com/CastnPlayMinis
youtube.com/castnplay
![Devil Bundle](http://resinclad.com/cdn/shop/files/DevilsLabeled_375x.png?v=1719153908 375w,//resinclad.com/cdn/shop/files/DevilsLabeled_410x.png?v=1719153908 410w,//resinclad.com/cdn/shop/files/DevilsLabeled_520x.png?v=1719153908 520w,//resinclad.com/cdn/shop/files/DevilsLabeled_576x.png?v=1719153908 576w,//resinclad.com/cdn/shop/files/DevilsLabeled_768x.png?v=1719153908 768w,//resinclad.com/cdn/shop/files/DevilsLabeled_992x.png?v=1719153908 992w,//resinclad.com/cdn/shop/files/DevilsLabeled_1024x.png?v=1719153908 1024w,//resinclad.com/cdn/shop/files/DevilsLabeled_1280x.png?v=1719153908 1280w)
![Devil Bundle](http://resinclad.com/cdn/shop/products/720X720-devils-6_375x.jpg?v=1719153908 375w,//resinclad.com/cdn/shop/products/720X720-devils-6_410x.jpg?v=1719153908 410w,//resinclad.com/cdn/shop/products/720X720-devils-6_520x.jpg?v=1719153908 520w,//resinclad.com/cdn/shop/products/720X720-devils-6_576x.jpg?v=1719153908 576w,//resinclad.com/cdn/shop/products/720X720-devils-6_768x.jpg?v=1719153908 768w,//resinclad.com/cdn/shop/products/720X720-devils-6_992x.jpg?v=1719153908 992w,//resinclad.com/cdn/shop/products/720X720-devils-6_1024x.jpg?v=1719153908 1024w,//resinclad.com/cdn/shop/products/720X720-devils-6_1280x.jpg?v=1719153908 1280w)
Devil Bundle
from $8.99
Comes in 32mm scale
Base Style: Specialized
Base Size: 30mm
Bundle includes all 5 models
Like this model? Click here to check out the rest of our collection from White Werewolf Tavern
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
White Werewolf Tavern
@WWTavern
If you would like to follow or support this artist, please check out the links below.
patreon.com/whitewerewolftavern
www.instagram.com/wwtavern
myminifactory.com/users/WWTavern
facebook.com/miniatures3d
twitter.com/tavernww
![Devil Horse](http://resinclad.com/cdn/shop/products/DevilHorse_375x.png?v=1633111131 375w,//resinclad.com/cdn/shop/products/DevilHorse_410x.png?v=1633111131 410w,//resinclad.com/cdn/shop/products/DevilHorse_520x.png?v=1633111131 520w,//resinclad.com/cdn/shop/products/DevilHorse_576x.png?v=1633111131 576w,//resinclad.com/cdn/shop/products/DevilHorse_768x.png?v=1633111131 768w,//resinclad.com/cdn/shop/products/DevilHorse_992x.png?v=1633111131 992w,//resinclad.com/cdn/shop/products/DevilHorse_1024x.png?v=1633111131 1024w,//resinclad.com/cdn/shop/products/DevilHorse_1280x.png?v=1633111131 1280w)
Devil Horse
from $10.99
Comes in 32mm scale
Base Style: Plain Oval
Base Size: 26.5mm x 63.5mm
Like this model? Click here to check out the rest of our collection from White Werewolf Tavern
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
White Werewolf Tavern
@WWTavern
If you would like to follow or support this artist, please check out the links below.
patreon.com/whitewerewolftavern
www.instagram.com/wwtavern
myminifactory.com/users/WWTavern
facebook.com/miniatures3d
twitter.com/tavernww
![Dilophosaurus](http://resinclad.com/cdn/shop/products/DILOPHOSAURUS_375x.jpg?v=1634760039 375w,//resinclad.com/cdn/shop/products/DILOPHOSAURUS_410x.jpg?v=1634760039 410w,//resinclad.com/cdn/shop/products/DILOPHOSAURUS_520x.jpg?v=1634760039 520w,//resinclad.com/cdn/shop/products/DILOPHOSAURUS_576x.jpg?v=1634760039 576w,//resinclad.com/cdn/shop/products/DILOPHOSAURUS_768x.jpg?v=1634760039 768w,//resinclad.com/cdn/shop/products/DILOPHOSAURUS_992x.jpg?v=1634760039 992w,//resinclad.com/cdn/shop/products/DILOPHOSAURUS_1024x.jpg?v=1634760039 1024w,//resinclad.com/cdn/shop/products/DILOPHOSAURUS_1280x.jpg?v=1634760039 1280w)
Dilophosaurus
from $8.99
Size: 49.5mm x 76.5mm x 63mm
Base Size: 35mm
Base Style: Plain
Like this model? Click here to check out the rest of our collection from 3DIPStudios
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
3DIPStudios
@3DIPStudios
If you would like to follow or support this artist, please check out the link below.
instagram.com/3dipstudios
![Dimorphodon](http://resinclad.com/cdn/shop/products/DIMORPHODON_375x.jpg?v=1634760266 375w,//resinclad.com/cdn/shop/products/DIMORPHODON_410x.jpg?v=1634760266 410w,//resinclad.com/cdn/shop/products/DIMORPHODON_520x.jpg?v=1634760266 520w,//resinclad.com/cdn/shop/products/DIMORPHODON_576x.jpg?v=1634760266 576w,//resinclad.com/cdn/shop/products/DIMORPHODON_768x.jpg?v=1634760266 768w,//resinclad.com/cdn/shop/products/DIMORPHODON_992x.jpg?v=1634760266 992w,//resinclad.com/cdn/shop/products/DIMORPHODON_1024x.jpg?v=1634760266 1024w,//resinclad.com/cdn/shop/products/DIMORPHODON_1280x.jpg?v=1634760266 1280w)
Dimorphodon
from $7.99
Size: 40.5mm x 54mm x 25mm
Base Size: 35mm
Base Style: Plain
Like this model? Click here to check out the rest of our collection from 3DIPStudios
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
3DIPStudios
@3DIPStudios
If you would like to follow or support this artist, please check out the link below.
instagram.com/3dipstudios
![Dire Wolves](http://resinclad.com/cdn/shop/products/resize-frostlands-castnplay-direwolf_375x.jpg?v=1647032255 375w,//resinclad.com/cdn/shop/products/resize-frostlands-castnplay-direwolf_410x.jpg?v=1647032255 410w,//resinclad.com/cdn/shop/products/resize-frostlands-castnplay-direwolf_520x.jpg?v=1647032255 520w,//resinclad.com/cdn/shop/products/resize-frostlands-castnplay-direwolf_576x.jpg?v=1647032255 576w,//resinclad.com/cdn/shop/products/resize-frostlands-castnplay-direwolf_768x.jpg?v=1647032255 768w,//resinclad.com/cdn/shop/products/resize-frostlands-castnplay-direwolf_992x.jpg?v=1647032255 992w,//resinclad.com/cdn/shop/products/resize-frostlands-castnplay-direwolf_1024x.jpg?v=1647032255 1024w,//resinclad.com/cdn/shop/products/resize-frostlands-castnplay-direwolf_1280x.jpg?v=1647032255 1280w)
Dire Wolves
from $6.99
Base Size: 35mm
Base Style: Arctic Base - Hero
Bundle includes all 5 models Models
Like this model? Click here to check out the rest of our collection from Cast n Play
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Cast n Play
@CastnPlay
If you would like to follow or support this artist, please check out the links below.
patreon.com/CastnPlay
instagram.com/CastnPlay
myminifactory.com/users/CastnPlay
facebook.com/CastnPlayMinis
youtube.com/castnplay
![Dire Wolves](http://resinclad.com/cdn/shop/products/DireWolves_MidnightCurse_CastNPlay_375x.png?v=1647283422 375w,//resinclad.com/cdn/shop/products/DireWolves_MidnightCurse_CastNPlay_410x.png?v=1647283422 410w,//resinclad.com/cdn/shop/products/DireWolves_MidnightCurse_CastNPlay_520x.png?v=1647283422 520w,//resinclad.com/cdn/shop/products/DireWolves_MidnightCurse_CastNPlay_576x.png?v=1647283422 576w,//resinclad.com/cdn/shop/products/DireWolves_MidnightCurse_CastNPlay_768x.png?v=1647283422 768w,//resinclad.com/cdn/shop/products/DireWolves_MidnightCurse_CastNPlay_992x.png?v=1647283422 992w,//resinclad.com/cdn/shop/products/DireWolves_MidnightCurse_CastNPlay_1024x.png?v=1647283422 1024w,//resinclad.com/cdn/shop/products/DireWolves_MidnightCurse_CastNPlay_1280x.png?v=1647283422 1280w)
Dire Wolves
from $6.99
Base Size:
A,C - 60mm
B - 25mm
Base Style:
A,C - Cursed Base - Oval
B - Cursed Base - Round
Bundle includes all 3 models
Like this model? Click here to check out the rest of our collection from Cast n Play
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Cast n Play
@CastnPlay
If you would like to follow or support this artist, please check out the links below.
patreon.com/CastnPlay
instagram.com/CastnPlay
myminifactory.com/users/CastnPlay
facebook.com/CastnPlayMinis
youtube.com/castnplay
![Dodo](http://resinclad.com/cdn/shop/products/45_DODO_375x.jpg?v=1650044398 375w,//resinclad.com/cdn/shop/products/45_DODO_410x.jpg?v=1650044398 410w,//resinclad.com/cdn/shop/products/45_DODO_520x.jpg?v=1650044398 520w,//resinclad.com/cdn/shop/products/45_DODO_576x.jpg?v=1650044398 576w,//resinclad.com/cdn/shop/products/45_DODO_768x.jpg?v=1650044398 768w,//resinclad.com/cdn/shop/products/45_DODO_992x.jpg?v=1650044398 992w,//resinclad.com/cdn/shop/products/45_DODO_1024x.jpg?v=1650044398 1024w,//resinclad.com/cdn/shop/products/45_DODO_1280x.jpg?v=1650044398 1280w)
Dodo
$6.99
Size: 38mm x 30.5mm x 24mm
Like this model? Click here to check out the rest of our collection from 3DIPStudios
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
3DIPStudios
@3DIPStudios
If you would like to follow or support this artist, please check out the link below.
instagram.com/3dipstudios
![Dodo Cavalry](http://resinclad.com/cdn/shop/products/resize-dodomountbundle_375x.jpg?v=1670424627 375w,//resinclad.com/cdn/shop/products/resize-dodomountbundle_410x.jpg?v=1670424627 410w,//resinclad.com/cdn/shop/products/resize-dodomountbundle_520x.jpg?v=1670424627 520w,//resinclad.com/cdn/shop/products/resize-dodomountbundle_576x.jpg?v=1670424627 576w,//resinclad.com/cdn/shop/products/resize-dodomountbundle_768x.jpg?v=1670424627 768w,//resinclad.com/cdn/shop/products/resize-dodomountbundle_992x.jpg?v=1670424627 992w,//resinclad.com/cdn/shop/products/resize-dodomountbundle_1024x.jpg?v=1670424627 1024w,//resinclad.com/cdn/shop/products/resize-dodomountbundle_1280x.jpg?v=1670424627 1280w)
![Dodo Cavalry](http://resinclad.com/cdn/shop/products/DodoMount1_A_375x.png?v=1670424637 375w,//resinclad.com/cdn/shop/products/DodoMount1_A_410x.png?v=1670424637 410w,//resinclad.com/cdn/shop/products/DodoMount1_A_520x.png?v=1670424637 520w,//resinclad.com/cdn/shop/products/DodoMount1_A_576x.png?v=1670424637 576w,//resinclad.com/cdn/shop/products/DodoMount1_A_768x.png?v=1670424637 768w,//resinclad.com/cdn/shop/products/DodoMount1_A_992x.png?v=1670424637 992w,//resinclad.com/cdn/shop/products/DodoMount1_A_1024x.png?v=1670424637 1024w,//resinclad.com/cdn/shop/products/DodoMount1_A_1280x.png?v=1670424637 1280w)
Dodo Cavalry
from $5.99
Base Size: 25mm
Base Style: Beach
Bundle includes all 3 models
Like this model? Click here to check out the rest of our collection from Goon Master Games
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Goon Master Games
@GoonMasterGames
If you would like to follow or support this artist, please check out the links below.
patreon.com/GoonMasterGames
instagram.com/GoonMasterGames
myminifactory.com/users/GoonMasterGames
![Doe Ingrid](http://resinclad.com/cdn/shop/products/DoeIngrid_375x.jpg?v=1670012983 375w,//resinclad.com/cdn/shop/products/DoeIngrid_410x.jpg?v=1670012983 410w,//resinclad.com/cdn/shop/products/DoeIngrid_520x.jpg?v=1670012983 520w,//resinclad.com/cdn/shop/products/DoeIngrid_576x.jpg?v=1670012983 576w,//resinclad.com/cdn/shop/products/DoeIngrid_768x.jpg?v=1670012983 768w,//resinclad.com/cdn/shop/products/DoeIngrid_992x.jpg?v=1670012983 992w,//resinclad.com/cdn/shop/products/DoeIngrid_1024x.jpg?v=1670012983 1024w,//resinclad.com/cdn/shop/products/DoeIngrid_1280x.jpg?v=1670012983 1280w)
Doe Ingrid
from $7.99
Comes in 32mm or 75mm scale
Base Style: Specialized
Like this model? Click here to check out the rest of our collection from White Werewolf Tavern
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
White Werewolf Tavern
@WWTavern
If you would like to follow or support this artist, please check out the links below.
patreon.com/whitewerewolftavern
www.instagram.com/wwtavern
myminifactory.com/users/WWTavern
facebook.com/miniatures3d
twitter.com/tavernww
![Dogs](http://resinclad.com/cdn/shop/products/DogBundle_375x.jpg?v=1650037088 375w,//resinclad.com/cdn/shop/products/DogBundle_410x.jpg?v=1650037088 410w,//resinclad.com/cdn/shop/products/DogBundle_520x.jpg?v=1650037088 520w,//resinclad.com/cdn/shop/products/DogBundle_576x.jpg?v=1650037088 576w,//resinclad.com/cdn/shop/products/DogBundle_768x.jpg?v=1650037088 768w,//resinclad.com/cdn/shop/products/DogBundle_992x.jpg?v=1650037088 992w,//resinclad.com/cdn/shop/products/DogBundle_1024x.jpg?v=1650037088 1024w,//resinclad.com/cdn/shop/products/DogBundle_1280x.jpg?v=1650037088 1280w)
![Dogs](http://resinclad.com/cdn/shop/products/Dog1_375x.jpg?v=1650037089 375w,//resinclad.com/cdn/shop/products/Dog1_410x.jpg?v=1650037089 410w,//resinclad.com/cdn/shop/products/Dog1_520x.jpg?v=1650037089 520w,//resinclad.com/cdn/shop/products/Dog1_576x.jpg?v=1650037089 576w,//resinclad.com/cdn/shop/products/Dog1_768x.jpg?v=1650037089 768w,//resinclad.com/cdn/shop/products/Dog1_992x.jpg?v=1650037089 992w,//resinclad.com/cdn/shop/products/Dog1_1024x.jpg?v=1650037089 1024w,//resinclad.com/cdn/shop/products/Dog1_1280x.jpg?v=1650037089 1280w)
Dogs
from $5.99
Size:
Dog 1 - 28.5mm x 25mm x 38mm
Dog 2 - 24mm x 26mm x 37.5mm
Bundle includes both models
Like this model? Click here to check out the rest of our collection from 3DIPStudios
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
3DIPStudios
@3DIPStudios
If you would like to follow or support this artist, please check out the link below.
instagram.com/3dipstudios
![Doll Master Angelica](http://resinclad.com/cdn/shop/products/DollMasterAngelica_375x.png?v=1669994796 375w,//resinclad.com/cdn/shop/products/DollMasterAngelica_410x.png?v=1669994796 410w,//resinclad.com/cdn/shop/products/DollMasterAngelica_520x.png?v=1669994796 520w,//resinclad.com/cdn/shop/products/DollMasterAngelica_576x.png?v=1669994796 576w,//resinclad.com/cdn/shop/products/DollMasterAngelica_768x.png?v=1669994796 768w,//resinclad.com/cdn/shop/products/DollMasterAngelica_992x.png?v=1669994796 992w,//resinclad.com/cdn/shop/products/DollMasterAngelica_1024x.png?v=1669994796 1024w,//resinclad.com/cdn/shop/products/DollMasterAngelica_1280x.png?v=1669994796 1280w)
Doll Master Angelica
from $10.99
Comes in 32mm or 75mm scale
Base Style: Specialized
Like this model? Click here to check out the rest of our collection from White Werewolf Tavern
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
White Werewolf Tavern
@WWTavern
If you would like to follow or support this artist, please check out the links below.
patreon.com/whitewerewolftavern
www.instagram.com/wwtavern
myminifactory.com/users/WWTavern
facebook.com/miniatures3d
twitter.com/tavernww
![Dolphin Bundle](http://resinclad.com/cdn/shop/files/DolphinBundle_375x.png?v=1689259807 375w,//resinclad.com/cdn/shop/files/DolphinBundle_410x.png?v=1689259807 410w,//resinclad.com/cdn/shop/files/DolphinBundle_520x.png?v=1689259807 520w,//resinclad.com/cdn/shop/files/DolphinBundle_576x.png?v=1689259807 576w,//resinclad.com/cdn/shop/files/DolphinBundle_768x.png?v=1689259807 768w,//resinclad.com/cdn/shop/files/DolphinBundle_992x.png?v=1689259807 992w,//resinclad.com/cdn/shop/files/DolphinBundle_1024x.png?v=1689259807 1024w,//resinclad.com/cdn/shop/files/DolphinBundle_1280x.png?v=1689259807 1280w)
![Dolphin Bundle](http://resinclad.com/cdn/shop/files/720X720-dolphin_375x.jpg?v=1689259809 375w,//resinclad.com/cdn/shop/files/720X720-dolphin_410x.jpg?v=1689259809 410w,//resinclad.com/cdn/shop/files/720X720-dolphin_520x.jpg?v=1689259809 520w,//resinclad.com/cdn/shop/files/720X720-dolphin_576x.jpg?v=1689259809 576w,//resinclad.com/cdn/shop/files/720X720-dolphin_768x.jpg?v=1689259809 768w,//resinclad.com/cdn/shop/files/720X720-dolphin_992x.jpg?v=1689259809 992w,//resinclad.com/cdn/shop/files/720X720-dolphin_1024x.jpg?v=1689259809 1024w,//resinclad.com/cdn/shop/files/720X720-dolphin_1280x.jpg?v=1689259809 1280w)
Dolphin Bundle
from $6.49
32mm ScaleSize:
Dolphin V1 - 33mm x 30mm x 34mm
Dolphin V2 - 34.5mm x 29mm x 36mm
Base not included
Bundle includes both models
Like this model? Click here to check out the rest of our collection from 3DIPStudios
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
3DIPStudios
@3DIPStudios
If you would like to follow or support this artist, please check out the link below.
instagram.com/3dipstudios