All products
3DIPStudios
Adventurer's Toolkit
All Models
Black Skull Studio
Busts
Cast n Play
Chibiatures
Crab Miniatures
Dark Realms Forge
Dioramas
Galaad Miniatures
Goon Master Games
Hold My Miniatures
Manuel Boria
Mini Bases
Miniatures
Painted Models
QB Works
Rocket Pig Games
Terrain
The Witchguild
ToyDoy Miniatures
White Werewolf Tavern
Witchsong Miniatures


Abadon the Demon King
from $6.49
32mm Scale
Bundle includes both models
Like this model? Click here to check out the rest of our collection from
Black Skull Studio
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Black Skull Studio
@BlackSkullStudio
If you would like to follow or support this artist, please check out the link below.
instagram.com/blackskull.studio
twitter.com/BlackSkullMX


Abadon the Demon King Bust
$24.99
Approximately 128mm tall
Like this model? Click here to check out the rest of our collection from
Black Skull Studio
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Black Skull Studio
@BlackSkullStudio
If you would like to follow or support this artist, please check out the link below.
instagram.com/blackskull.studio
twitter.com/BlackSkullMX


Amon the Tiefling Warlock
from $5.49
32mm Scale
Base Size: 25mm
Base Style:
Pose 1 - Assorted Bases - Wood
Pose 2 - Assorted Bases - Terracotta A
Bundle includes both models
Like this model? Click here to check out the rest of our collection from
Black Skull Studio
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Black Skull Studio
@BlackSkullStudio
If you would like to follow or support this artist, please check out the link below.
instagram.com/blackskull.studio
twitter.com/BlackSkullMX


Andreus the Dwarf Cleric
from $5.49
32mm Scale
Base Size: 25mm
Base Style:
Pose 1 - Assorted Bases - Terracotta A
Pose 2 - Assorted Bases - Terracotta C
Bundle includes both models
Like this model? Click here to check out the rest of our collection from
Black Skull Studio
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Black Skull Studio
@BlackSkullStudio
If you would like to follow or support this artist, please check out the link below.
instagram.com/blackskull.studio
twitter.com/BlackSkullMX


Arjhan the Dragonborn Paladin
from $6.49
32mm Scale
Base Size: 25mm
Base Style:
Pose 1 - Assorted Bases - Terracotta A
Pose 2 - Assorted Bases - Terracotta C
Bundle includes both models
Like this model? Click here to check out the rest of our collection from
Black Skull Studio
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Black Skull Studio
@BlackSkullStudio
If you would like to follow or support this artist, please check out the link below.
instagram.com/blackskull.studio
twitter.com/BlackSkullMX


Assorted Bases
from $1.49
Like this model? Click here to check out the rest of our collection from
Black Skull Studio
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Black Skull Studio
@BlackSkullStudio
If you would like to follow or support this artist, please check out the link below.
instagram.com/blackskull.studio
twitter.com/BlackSkullMX


Baron the Elf Warlock
from $6.49
32mm Scale
Base Size: 25mm
Base Style:
Pose 1 - Assorted Bases - Terracotta A
Pose 2 - Assorted Bases - Terracotta C
Bundle includes both models
Like this model? Click here to check out the rest of our collection from
Black Skull Studio
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Black Skull Studio
@BlackSkullStudio
If you would like to follow or support this artist, please check out the link below.
instagram.com/blackskull.studio
twitter.com/BlackSkullMX


Bedivere the Knight
from $7.49
32mm Scale
Bundle includes both models
Like this model? Click here to check out the rest of our collection from
Black Skull Studio
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Black Skull Studio
@BlackSkullStudio
If you would like to follow or support this artist, please check out the link below.
instagram.com/blackskull.studio
twitter.com/BlackSkullMX


Carac the Knight
from $6.99
32mm Scale
Bundle includes both models
Like this model? Click here to check out the rest of our collection from
Black Skull Studio
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Black Skull Studio
@BlackSkullStudio
If you would like to follow or support this artist, please check out the link below.
instagram.com/blackskull.studio
twitter.com/BlackSkullMX


Carthos the Tiefling Rogue
from $6.49
32mm Scale
Base Size: 25mm
Base Style:
Pose 1 - Assorted Bases - Terracotta B
Pose 2 - Assorted Bases - Ground
Bundle includes both models
Like this model? Click here to check out the rest of our collection from
Black Skull Studio
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Black Skull Studio
@BlackSkullStudio
If you would like to follow or support this artist, please check out the link below.
instagram.com/blackskull.studio
twitter.com/BlackSkullMX


Derros the Dwarf Fighter
from $6.49
32mm Scale
Base Size: 25mm
Base Style: Assorted Bases - Ground
Bundle includes all three models
Like this model? Click here to check out the rest of our collection from
Black Skull Studio
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Black Skull Studio
@BlackSkullStudio
If you would like to follow or support this artist, please check out the link below.
instagram.com/blackskull.studio
twitter.com/BlackSkullMX


Dwarven Props
from $5.99
32mm Scale
Bundle includes all prop sets (17 pieces).
Like this model? Click here to check out the rest of our collection from
Black Skull Studio
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Black Skull Studio
@BlackSkullStudio
If you would like to follow or support this artist, please check out the link below.
instagram.com/blackskull.studio
twitter.com/BlackSkullMX


Executioner the Demon King
from $6.49
32mm Scale
Bundle includes both models
Like this model? Click here to check out the rest of our collection from
Black Skull Studio
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Black Skull Studio
@BlackSkullStudio
If you would like to follow or support this artist, please check out the link below.
instagram.com/blackskull.studio
twitter.com/BlackSkullMX


Galahad the Knight
from $6.99
32mm Scale
Bundle includes both models
Like this model? Click here to check out the rest of our collection from
Black Skull Studio
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Black Skull Studio
@BlackSkullStudio
If you would like to follow or support this artist, please check out the link below.
instagram.com/blackskull.studio
twitter.com/BlackSkullMX


Grigor the Human Bard
from $5.99
32mm Scale
Base Size: 25mm
Base Style:
Pose 1 - Assorted Bases - Wood
Pose 2 - Assorted Bases - Terracotta A
Bundle includes both models
Like this model? Click here to check out the rest of our collection from
Black Skull Studio
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Black Skull Studio
@BlackSkullStudio
If you would like to follow or support this artist, please check out the link below.
instagram.com/blackskull.studio
twitter.com/BlackSkullMX


Human Props
from $7.99
32mm Scale
Bundle includes all prop sets (18 pieces).
Like this model? Click here to check out the rest of our collection from
Black Skull Studio
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Black Skull Studio
@BlackSkullStudio
If you would like to follow or support this artist, please check out the link below.
instagram.com/blackskull.studio
twitter.com/BlackSkullMX


Ivor the Human Gladiator
from $6.99
32mm Scale
Base Size: 32mm
Base Style:
Pose 1 - Assorted Bases - Terracotta A
Pose 2 - Assorted Bases - Terracotta A
Bundle includes both models
Like this model? Click here to check out the rest of our collection from
Black Skull Studio
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Black Skull Studio
@BlackSkullStudio
If you would like to follow or support this artist, please check out the link below.
instagram.com/blackskull.studio
twitter.com/BlackSkullMX


Kethra the Human Ranger
from $5.99
32mm Scale
Base Size: 25mm
Base Style:
Pose 1 - Assorted Bases - Terracotta A
Pose 2 - Assorted Bases - Terracotta A
Bundle includes both models
Like this model? Click here to check out the rest of our collection from
Black Skull Studio
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Black Skull Studio
@BlackSkullStudio
If you would like to follow or support this artist, please check out the link below.
instagram.com/blackskull.studio
twitter.com/BlackSkullMX


Krusk the Half Orc Barbarian
from $7.49
32mm Scale
Base Size: 25mm
Base Style:
Pose 1 - Assorted Bases - Terracotta A
Pose 2 - Assorted Bases - Terracotta A
Bundle includes both models
Like this model? Click here to check out the rest of our collection from
Black Skull Studio
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Black Skull Studio
@BlackSkullStudio
If you would like to follow or support this artist, please check out the link below.
instagram.com/blackskull.studio
twitter.com/BlackSkullMX


Mimic Armor
$10.99
32mm Scale
Includes both models
Like this model? Click here to check out the rest of our collection from
Black Skull Studio
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Black Skull Studio
@BlackSkullStudio
If you would like to follow or support this artist, please check out the link below.
instagram.com/blackskull.studio
twitter.com/BlackSkullMX


Mimic Barrel
$10.99
32mm Scale
Includes both models
Like this model? Click here to check out the rest of our collection from
Black Skull Studio
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Black Skull Studio
@BlackSkullStudio
If you would like to follow or support this artist, please check out the link below.
instagram.com/blackskull.studio
twitter.com/BlackSkullMX


Mimic Bed
$10.99
32mm Scale
Includes both models
Like this model? Click here to check out the rest of our collection from
Black Skull Studio
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Black Skull Studio
@BlackSkullStudio
If you would like to follow or support this artist, please check out the link below.
instagram.com/blackskull.studio
twitter.com/BlackSkullMX


Mimic Bookcase
$12.99
32mm Scale
Includes both models
Like this model? Click here to check out the rest of our collection from
Black Skull Studio
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Black Skull Studio
@BlackSkullStudio
If you would like to follow or support this artist, please check out the link below.
instagram.com/blackskull.studio
twitter.com/BlackSkullMX


Mimic Cellar Door
from $8.99
32mm Scale
Includes both models (Cellar Door & Mimic)Size:Small Door - 23mm x 17mmLarge Door - 46.5mm x 34mm
Like this model? Click here to check out the rest of our collection from
Black Skull Studio
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Black Skull Studio
@BlackSkullStudio
If you would like to follow or support this artist, please check out the link below.
instagram.com/blackskull.studio
twitter.com/BlackSkullMX


Mimic Chair
$7.99
32mm Scale
Includes both models
Like this model? Click here to check out the rest of our collection from
Black Skull Studio
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Black Skull Studio
@BlackSkullStudio
If you would like to follow or support this artist, please check out the link below.
instagram.com/blackskull.studio
twitter.com/BlackSkullMX