Female Vampire
from $7.49
Base Size: 25mm
Base Style: Rock
Like this model? Click here to check out the rest of our collection from
Galaad Miniatures
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC. is a licensed distributor of these 3D prints designed by:
Galaad Miniatures
@GalaadMiniatures
If you would like to follow or support this artist, please check out the links below.
patreon.com/galaad
facebook.com/galaadminiatures
instagram.com/galaad_miniatures
myminifactory.com/users/galaad
Female Vampire Horse Rider
from $7.49
Base Size: 20.5mm x 41.5mm
Base Style: Raised Plain Oval
Like this model? Click here to check out the rest of our collection from
Galaad Miniatures
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC. is a licensed distributor of these 3D prints designed by:
Galaad Miniatures
@GalaadMiniatures
If you would like to follow or support this artist, please check out the links below.
patreon.com/galaad
facebook.com/galaadminiatures
instagram.com/galaad_miniatures
myminifactory.com/users/galaad
Female Warrior
from $7.49
Base Size: 25mm
Base Style: Rock
Like this model? Click here to check out the rest of our collection from
Galaad Miniatures
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC. is a licensed distributor of these 3D prints designed by:
Galaad Miniatures
@GalaadMiniatures
If you would like to follow or support this artist, please check out the links below.
patreon.com/galaad
facebook.com/galaadminiatures
instagram.com/galaad_miniatures
myminifactory.com/users/galaad
Female Wizard
from $7.49
Base Size: 25mm
Base Style: Rock
Like this model? Click here to check out the rest of our collection from
Galaad Miniatures
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC. is a licensed distributor of these 3D prints designed by:
Galaad Miniatures
@GalaadMiniatures
If you would like to follow or support this artist, please check out the links below.
patreon.com/galaad
facebook.com/galaadminiatures
instagram.com/galaad_miniatures
myminifactory.com/users/galaad
Fenton the Wizard
from $8.99
Base Size: 25mm
Base Style: City Streets
Like this model? Click here to check out the rest of our collection from Galaad Miniatures
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Galaad Miniatures
@GalaadMiniatures
If you would like to follow or support this artist, please check out the links below.
patreon.com/galaad
facebook.com/galaadminiatures
instagram.com/galaad_miniatures
myminifactory.com/users/galaad
Fishertown Bundle
from $7.49
Base Size: 25mm
Base Style: Cobblestone (Captain includes specialized Captain's Base)
Bundle includes all 9 models
Like this model? Click here to check out the rest of our collection from
Galaad Miniatures
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC. is a licensed distributor of these 3D prints designed by:
Galaad Miniatures
@GalaadMiniatures
If you would like to follow or support this artist, please check out the links below.
patreon.com/galaad
facebook.com/galaadminiatures
instagram.com/galaad_miniatures
myminifactory.com/users/galaad
Ghost Bundle
from $6.99
Base Size: 25mm
Base Style: Temple Floor
Bundle includes both models
Like this model? Click here to check out the rest of our collection from Galaad Miniatures
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Galaad Miniatures
@GalaadMiniatures
If you would like to follow or support this artist, please check out the links below.
patreon.com/galaad
facebook.com/galaadminiatures
instagram.com/galaad_miniatures
myminifactory.com/users/galaad
Ghoul Bundle
from $6.99
Base Size: 25mm
Base Style: Enforcer
Bundle includes all 3 models
Like this model? Click here to check out the rest of our collection from Galaad Miniatures
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Galaad Miniatures
@GalaadMiniatures
If you would like to follow or support this artist, please check out the links below.
patreon.com/galaad
facebook.com/galaadminiatures
instagram.com/galaad_miniatures
myminifactory.com/users/galaad
Goblin Drummer
from $6.99
Base Size: 25mm
Base Style: Specialized
Like this model? Click here to check out the rest of our collection from Galaad Miniatures
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Galaad Miniatures
@GalaadMiniatures
If you would like to follow or support this artist, please check out the links below.
patreon.com/galaad
facebook.com/galaadminiatures
instagram.com/galaad_miniatures
myminifactory.com/users/galaad
Goblin Fighter Bundle
from $6.49
Base Size: 25mm
Base Style: Specialized
Bundle includes all 4 models
Like this model? Click here to check out the rest of our collection from Galaad Miniatures
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Galaad Miniatures
@GalaadMiniatures
If you would like to follow or support this artist, please check out the links below.
patreon.com/galaad
facebook.com/galaadminiatures
instagram.com/galaad_miniatures
myminifactory.com/users/galaad
Goblin Shaman
from $6.99
Base Size: 25mm
Base Style: Specialized
Like this model? Click here to check out the rest of our collection from Galaad Miniatures
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Galaad Miniatures
@GalaadMiniatures
If you would like to follow or support this artist, please check out the links below.
patreon.com/galaad
facebook.com/galaadminiatures
instagram.com/galaad_miniatures
myminifactory.com/users/galaad
Gypsum the Rat
from $6.99
Base Size: 25mm
Base Style: Plain
Like this model? Click here to check out the rest of our collection from Galaad Miniatures
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Galaad Miniatures
@GalaadMiniatures
If you would like to follow or support this artist, please check out the links below.
patreon.com/galaad
facebook.com/galaadminiatures
instagram.com/galaad_miniatures
myminifactory.com/users/galaad
Half-Orc Wizard
from $7.49
Base Size: 25mm
Base Style: Rock
Like this model? Click here to check out the rest of our collection from
Galaad Miniatures
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC. is a licensed distributor of these 3D prints designed by:
Galaad Miniatures
@GalaadMiniatures
If you would like to follow or support this artist, please check out the links below.
patreon.com/galaad
facebook.com/galaadminiatures
instagram.com/galaad_miniatures
myminifactory.com/users/galaad
Hanna
from $6.99
Base Size: 25mm
Base Style: City Streets
Like this model? Click here to check out the rest of our collection from Galaad Miniatures
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Galaad Miniatures
@GalaadMiniatures
If you would like to follow or support this artist, please check out the links below.
patreon.com/galaad
facebook.com/galaadminiatures
instagram.com/galaad_miniatures
myminifactory.com/users/galaad
Heroes Bundle
from $7.49
Base Size: 25mm
Base Style: Rock
Bundle includes all 11 models
Like this model? Click here to check out the rest of our collection from
Galaad Miniatures
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC. is a licensed distributor of these 3D prints designed by:
Galaad Miniatures
@GalaadMiniatures
If you would like to follow or support this artist, please check out the links below.
patreon.com/galaad
facebook.com/galaadminiatures
instagram.com/galaad_miniatures
myminifactory.com/users/galaad
Hunter Bases
from $1.25
Like this model? Click here to check out the rest of our collection from Galaad Miniatures
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Galaad Miniatures
@GalaadMiniatures
If you would like to follow or support this artist, please check out the links below.
patreon.com/galaad
facebook.com/galaadminiatures
instagram.com/galaad_miniatures
myminifactory.com/users/galaad
Kitsune Fighter
from $6.99
Base Size: 25mm
Base Style: Temple Floor
Like this model? Click here to check out the rest of our collection from Galaad Miniatures
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Galaad Miniatures
@GalaadMiniatures
If you would like to follow or support this artist, please check out the links below.
patreon.com/galaad
facebook.com/galaadminiatures
instagram.com/galaad_miniatures
myminifactory.com/users/galaad
Kitsune Ranger
from $7.49
Base Size: 25mm
Base Style: Rock
Like this model? Click here to check out the rest of our collection from
Galaad Miniatures
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC. is a licensed distributor of these 3D prints designed by:
Galaad Miniatures
@GalaadMiniatures
If you would like to follow or support this artist, please check out the links below.
patreon.com/galaad
facebook.com/galaadminiatures
instagram.com/galaad_miniatures
myminifactory.com/users/galaad
Knight Bundle
from $6.99
Base Size: 25mm
Base Style: Temple Floor
Bundle includes all 6 models
Like this model? Click here to check out the rest of our collection from Galaad Miniatures
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Galaad Miniatures
@GalaadMiniatures
If you would like to follow or support this artist, please check out the links below.
patreon.com/galaad
facebook.com/galaadminiatures
instagram.com/galaad_miniatures
myminifactory.com/users/galaad
Knight Traveler
from $7.49
Base Size: 25mm
Base Style: Rock
Like this model? Click here to check out the rest of our collection from
Galaad Miniatures
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC. is a licensed distributor of these 3D prints designed by:
Galaad Miniatures
@GalaadMiniatures
If you would like to follow or support this artist, please check out the links below.
patreon.com/galaad
facebook.com/galaadminiatures
instagram.com/galaad_miniatures
myminifactory.com/users/galaad
Lady of the North
from $6.99
Base Size: 25mm
Base Style: Plain
Like this model? Click here to check out the rest of our collection from Galaad Miniatures
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Galaad Miniatures
@GalaadMiniatures
If you would like to follow or support this artist, please check out the links below.
patreon.com/galaad
facebook.com/galaadminiatures
instagram.com/galaad_miniatures
myminifactory.com/users/galaad
Letho
from $6.99
Base Size: 25mm
Base Style: City Streets
Like this model? Click here to check out the rest of our collection from Galaad Miniatures
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Galaad Miniatures
@GalaadMiniatures
If you would like to follow or support this artist, please check out the links below.
patreon.com/galaad
facebook.com/galaadminiatures
instagram.com/galaad_miniatures
myminifactory.com/users/galaad
Maeva and Crocodile
from $14.99
Base Size: 65mm
Base Style: City Streets
Like this model? Click here to check out the rest of our collection from Galaad Miniatures
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Galaad Miniatures
@GalaadMiniatures
If you would like to follow or support this artist, please check out the links below.
patreon.com/galaad
facebook.com/galaadminiatures
instagram.com/galaad_miniatures
myminifactory.com/users/galaad
Mage 1 - Goggles
from $6.49
Base Size: 25mm
Base Style: Mage Tower Base
Like this model? Click here to check out the rest of our collection from Galaad Miniatures
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC. is a licensed distributor of these 3D prints designed by:
Galaad Miniatures
@GalaadMiniatures
If you would like to follow or support this artist, please check out the links below.
patreon.com/galaad
facebook.com/galaadminiatures
instagram.com/galaad_miniatures
myminifactory.com/users/galaad
Mage 1 - Hood
from $6.49
Base Size: 25mm
Base Style: Mage Tower Base
Like this model? Click here to check out the rest of our collection from Galaad Miniatures
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC. is a licensed distributor of these 3D prints designed by:
Galaad Miniatures
@GalaadMiniatures
If you would like to follow or support this artist, please check out the links below.
patreon.com/galaad
facebook.com/galaadminiatures
instagram.com/galaad_miniatures
myminifactory.com/users/galaad