Cast n Play

Approximate size: Cardinal Pazmino Demonic Nuncio - A - 35.5mm x 25.5mm x 51.5mm Cardinal Pazmino Demonic Nuncio - B - 39mm x 35.5mm x 51.5mm Base Info: Church of Wrath - 30mm - RoundComes in 32mm scale  Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Bishops of Purified Blood - A - 32.5mm x 24.5mm x 53.5mm Bishops of Purified Blood - B - 34mm x 45mm x 42mm Bishops of Purified Blood - C - 24mm x 26.5mm x 52.5mm Bishops of Purified Blood - D - 38.5mm x 42mm x 43.5mm Bishops of Purified Blood - E - 32mm x 26.5mm x 52mm Bishops of Purified Blood - F - 23.5mm x 27.5mm x 51mm Base Info: Church of Wrath - 25mm - RoundComes in 32mm scaleBundle includes all 6 models  Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Archbishop Belphegor Cleanser - A - 25mm x 21mm x 46mm Archbishop Belphegor Cleanser - B - 28.5mm x 29mm x 52mm Base Info: Church of Wrath - 25mm - RoundComes in 32mm scale  Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

  Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: 95.5mm x 56mm x 73mmComes in 32mm scale  Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Spirit Hands - A - 20mm x 20.5mm x 12.5mm Spirit Hands - B - 31.5mm x 36mm x 16.5mm Comes in 32mm scale Bundle includes both models  Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Undead Bear - A - 18mm x 28.5mm x 38.5mm Undead Bear - B - 24mm x 23.5mm x 46mm Undead Bear - C - 22mm x 31mm x 39mm Base Info: Plain - 25mmComes in 32mm scaleBundle includes all 3 models  Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Comes in 32mm scale    Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Hellhound - A - 11.5mm x 24.5mm x 19mm Hellhound - B - 10mm x 16.5mm x 19mm Hellhound - C - 7.5mm x 22mm x 19mm Hellhound - D - 9.5mm x 30.5mm x 17mm Hellhound - E - 11.5mm x 22.5mm x 19mm Base Info: Plain - 25mmComes in 32mm scaleBundle includes all 5 models  Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Comes in 32mm scale    Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Comes in 32mm scale   Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Comes in 32mm scale    Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Half Elf Ranger - Lvl 1 - 13.5mm x 9mm x 33.5mm Half Elf Ranger - Lvl 10 - 14.5mm x 11mm x 33.5mm Half Elf Ranger - Lvl 20 - 16mm x 14mm x 33.5mm Base Info: Plain - 25mmComes in 32mm scaleBundle includes all 3 models  Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: PathTile_Curve - 117mm x 133mm x 33mm PathTile_I_Short - 75.5mm x 55mm x 39.5mm PathTile_I_Medium - 76.5mm x 92mm x 39mm PathTile_I_Large - 74mm x 173mm x 47mm PathTile_L - 178mm x 133mm x 35.5mm ArchSpine - 80.5mm x 228.5mm x 83mm ArchSpineRocks - 140mm x 203.5mm x 87.5mm Dragon Skeleton - 162mm x 440.5mm x 117mm Rock Bridge - 74.5mm x 218mm x 123mm Spikes Bridge - 107.5mm x 251.5mm x 33.5mm Spine Bridge - 143mm x 334.5mm x 138.5mm Short Platform - 98mm x 115mm x 43.5mm Tall Platform - 86.5mm x 98mm x 74mm 3 Platforms - 117.5mm x 133mm x 92mm Comes in 32mm scale Bundle includes all 15 sets Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Burried Dino - 56.5mm x 62.5mm x 30mm Burried Dino Rock - 58.5mm x 54mm x 30mm Dino Lay On Rock - 53.5mm x 70mm x 56mm Dino Ribs - 61.5mm x 78.5mm x 55mm Impaled Skull - 47mm x 53mm x 53.5mm Jaw - 74.5mm x 55.5mm x 56mm Mammoth Skull - 68.5mm x 49mm x 35.5mm Ox - 75.5mm x 55.5mm x 26mm Ox Big Ribs - 64mm x 83.5mm x 33.5mm Ox Rock - 43mm x 72mm x 32.5mm Ribs - 81mm x 84mm x 45mm Spine - 52.5mm x 51.5mm x 22.5mm TRex 2 Skulls - 125.5mm x 89.5mm x 52mm TRex Rock - 82mm x 115.5mm x 47mm TRex Skull - 40mm x 66.5mm x 38.5mm Comes in 32mm scale Bundle includes all 15 models Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Geyser 01 - 93mm x 102.5mm x 55mm Geyser 02 - 80.5mm x 71mm x 100.5mm Geyser 03 - 75mm x 77mm x 97.5mm Platform 01 - 70.5mm x 115mm x 101.5mm Platform 02 - 92mm x 127.5mm x 67.5mm Platform 03 - 49.5mm x 91.5mm x 61.5mm Platform 04 - 100.5mm x 196mm x 76.5mm Platform 05 - 118mm x 172.5mm x 71mm Platform 06 - 103.5mm x 158mm x 59mm Platform 07 - 111.5mm x 173mm x 36.5mm Comes in 32mm scale Bundle includes all 10 models Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Lava River I 01 - 69.5mm x 96mm x 11mm Lava River I 02 - 94.5mm x 95.5mm x 10mm Lava River I 03 - 77mm x 88mm x 11.5mm Lava River I 04 - 90.5mm x 87.5mm x 9.5mm Lava River L - 92mm x 127.5mm x 10mm Volcano Rock Path L - 97mm x 110.5mm x 10.5mm Volcano Rock Path S - 91mm x 114.5mm x 8mm Volcano Rock Path C - 86.5mm x 90mm x 8mm Volcano Rock Path I 01 - 63.5mm x 104.5mm x 8mm Volcano Rock Path I 02 - 66.5mm x 107mm x 8mm Volcano Difficult Terrain 01 - 94.5mm x 171.5mm x 83mm Volcano Difficult Terrain 02 - 114mm x 126mm x 93mm Volcano Difficult Terrain 03 - 121mm x 215mm x 106mm Volcano Difficult Terrain 04 - 121.5mm x 199.5mm x 66.5mm Volcano Difficult Terrain 05 - 93mm x 171.5mm x 37mm Comes in 32mm scale Bundle includes all 17 sets Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Crater Lava Flow A - 53mm x 57.5mm x 25mm Crater Lava Flow B - 61.5mm x 95.5mm x 47.5mm Crater Lava Flow C - 56.5mm x 54.5mm x 64mm Crater Lava Flow D - 54mm x 71.5mm x 55.5mm Crater Lava Flow E - 62mm x 51mm x 63mm Lava Rock Formation A - 60mm x 50mm x 72.5mm Lava Rock Formation B - 89.5mm x 66mm x 65.5mm Lava Rock Formation C - 89mm x 74mm x 35.5mm Small Crater A - 50mm x 58.5mm x 17.5mm Small Crater B - 43.5mm x 50mm x 19mm Small Crater C - 58mm x 63.5mm x 25mm Spikes Formation A - 89.5mm x 61mm x 45mm Spikes Formation B - 87.5mm x 64mm x 53.5mm Spikes Formation C - 91mm x 68.5mm x 54.5mm Spikes Formation D - 112mm x 53mm x 61.5mm Comes in 32mm scale Bundle includes all 15 models Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Birch Tree A - 183mm x 189mm x 146.5mm Birch Tree B - 122.5mm x 82.5mm x 139.5mm Birch Tree C - 183mm x 189mm x 146.5mm Birch Tree D - 171.5mm x 121.5mm x 98mm Dead Swamp Tree - 150mm x 100mm x 94mm Swamp Tree - 137mm x 108.5mm x 127.5mm Willow Tree A - 139mm x 134.5mm x 113.5mm Willow Tree B - 131mm x 97mm x 90mm Willow Tree C - 140mm x 193.5mm x 99.5mm Willow Tree D - 137.5mm x 110mm x 96mm Comes in 32mm scale Bundle includes all 10 models Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Crooked Arch - 57.5mm x 120mm x 84mm Giant Mushroom - 56.5mm x 81.5mm x 78mm Roots w Crystals - 89mm x 155.5mm x 90.5mm Rounded Leaf Plants - 55.5mm x 75mm x 71.5mm Carnivorous Plant - 34.5mm x 58.5mm x 48.5mm Dead Broken Trunk - 53mm x 72mm x 87.5mm Frog Trunk - 65mm x 61mm x 27mm Giant Flower - 38mm x 64.5mm x 55mm Lizard Rock - 48mm x 63mm x 35.5mm Round Flowers - 32mm x 43mm x 53.5mm Spiked Trunks - 43.5mm x 105.5mm x 37.5mm Tangled Roots - 90.5mm x 138mm x 45mm Thick Trunk - 56mm x 57mm x 91.5mm Trunk Arch - 45.5mm x 141.5mm x 89.5mm Trunks w Turtle - 74.5mm x 77.5mm x 30.5mm Twisted Trunk - 49.5mm x 49mm x 98.5mm Comes in 32mm scale Bundle includes all 16 models Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Carnivorous 1Flower - 50mm x 47mm x 39mm Carnivorous 2Flowers - 47.5mm x 36.5mm x 39.5mm Carnivorous 4Heads - 45.5mm x 24mm x 39.5mm Carnivorous Big Head - 47.5mm x 31.5mm x 37.5mm Carnivorous Spike Heads - 42.5mm x 32.5mm x 45mm Mushrooms - 44.5mm x 32mm x 32.5mm Rock Mud - 42.5mm x 34mm x 42mm Rock Mushrooms - 58.5mm x 41.5mm x 42mm Skeleton - 62mm x 44mm x 31mm Small Flowers - 37.5mm x 46mm x 32.5mm Spider Eggs - 88mm x 46mm x 26mm Spikes - 55.5mm x 32mm x 39.5mm Trunks - 51mm x 36.5mm x 32mm Trunk Shrooms - 51.5mm x 22mm x 35mm Trunk Spikes - 75.5mm x 42.5mm x 38mm Comes in 32mm scale Bundle includes all 15 models Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Big Rock Tree - 165mm x 119.5mm x 107mm Dead Tilted Tree - 132mm x 67mm x 79mm Savanna Tree A - 101.5mm x 99mm x 127.5mm Savanna Tree B - 101.5mm x 88.5mm x 115mm Savanna Tree C - 119mm x 86mm x 93.5mm Tree Antilope - 156.5mm x 81mm x 87.5mm Tree Hyenas - 212.5mm x 116.5mm x 117.5mm Tree Lioness - 141.5mm x 107.5mm x 110.5mm Tree Pond A - 212.5mm x 116.5mm x 117.5mm Tree Pond B - 151.5mm x 105.5mm x 131.5mm Tree Two Birds - 183.5mm x 113mm x 124mm Comes in 32mm scale Bundle includes all 11 models Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Acacia Tree A - 181.5mm x 105.5mm x 98.5mm Acacia Tree B - 169mm x 144mm x 146.5mm Acacia Tree C - 185mm x 140mm x 130mm Acacia Tree D - 153mm x 167.5mm x 148.5mm Acacia Tree E - 119mm x 83mm x 77.5mm Candelabra Tree - 83mm x 47.5mm x 56.5mm Dead Tree A - 57mm x 31.5mm x 61.5mm Dead Tree B - 57mm x 40mm x 90mm Dead Tree C - 59mm x 45.5mm x 91.5mm Dead Tree D - 83mm x 44mm x 46.5mm Meerkat Rock - 63mm x 39.5mm x 51mm Rock Bit A - 79.5mm x 57.5mm x 46.5mm Rock Bit B - 70mm x 54mm x 46mm Comes in 32mm scale Bundle includes all 13 models Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Big Rock w Acacia A - 105mm x 85.5mm x 67.5mm Big Rock w Acacia B - 86mm x 75mm x 76.5mm Big Rock w Acacia C - 91.5mm x 84.5mm x 67mm Big Rock w Acacia D - 123.5mm x 90.5mm x 78.5mm Bent Trunk - 61.5mm x 50mm x 48.5mm Big Rock Dry Tree - 87.5mm x 56.5mm x 49.5mm Big Rock Moss A - 58.5mm x 63.5mm x 30.5mm Big Rock Moss B - 75mm x 54.5mm x 34.5mm Little Bird - 52.5mm x 40.5mm x 40.5mm Meerkat - 40.5mm x 28mm x 30mm Mice - 55.5mm x 45.5mm x 37.5mm Rooted Out Tree - 94.5mm x 71mm x 32mm Stump - 38.5mm x 26.5mm x 36mm Stump Bent Branch - 83mm x 25mm x 37.5mm Tilted Rock - 58.5mm x 64mm x 33.5mm Comes in 32mm scale Bundle includes all 15 models Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Beech Tree A - 66.5mm x 63mm x 79mm Beech Tree B - 64.5mm x 72.5mm x 85.5mm Beech Tree C - 58mm x 92.5mm x 67mm Beech Tree D - 59.5mm x 67mm x 89.5mm Bonsai Tree A - 38mm x 46.5mm x 52.5mm Bonsai Tree B - 61.5mm x 101mm x 67.5mm Bonsai Tree C - 59.5mm x 117.5mm x 89mm Cherry Blossom A - 63.5mm x 83mm x 96mm Cherry Blossom B - 67.5mm x 89.5mm x 103.5mm Cherry Blossom C - 63mm x 70.5mm x 75.5mm Cherry Blossom D - 104.5mm x 149.5mm x 96.5mm Cherry Blossom Bridge - 138mm x 188mm x 110mm Stone Bridge - 61mm x 203mm x 39mm Tree Bridge - 86mm x 180mm x 104mm Comes in 32mm scale Bundle includes all 14 models Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay