Products

Model is approximately 118mm tall excluding the stand.     Like this model? Click here to check out the rest of our collection from White Werewolf Tavern   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: White Werewolf Tavern @WWTavern If you would like to follow or support this artist, please check out the links below. patreon.com/whitewerewolftavern www.instagram.com/wwtavern myminifactory.com/users/WWTavern facebook.com/miniatures3d twitter.com/tavernww

Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: BallHog - 1 - 46mm x 41mm x 27mm BallHog - 2 - 31.5mm x 19.5mm x 57mm BallHog - 3 - 42mm x 20mm x 37mm BallHog - 4 - 26.5mm x 41mm x 43.5mm BallHog - 5 - 56.5mm x 24mm x 28.5mm Base Info: Crystal Cave - 25mm - RoundComes in 32mm scale Bundle includes all 5 modelsLike this model? Click here to check out the rest of our collection from Goon Master Games   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Goon Master Games @GoonMasterGames If you would like to follow or support this artist, please check out the links below. patreon.com/GoonMasterGames instagram.com/GoonMasterGames myminifactory.com/users/GoonMasterGames

Like this model? Click here to check out the rest of our collection from Goon Master Games   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Goon Master Games @GoonMasterGames If you would like to follow or support this artist, please check out the links below. patreon.com/GoonMasterGames instagram.com/GoonMasterGames myminifactory.com/users/GoonMasterGames

Comes in 32mm scale  Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Comes in 32mm scale  Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Base Style: Specialized Comes in 32mm scaleBundle includes all 4 models  Like this model? Click here to check out the rest of our collection from White Werewolf Tavern   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: White Werewolf Tavern @WWTavern If you would like to follow or support this artist, please check out the links below. patreon.com/whitewerewolftavern www.instagram.com/wwtavern myminifactory.com/users/WWTavern facebook.com/miniatures3d twitter.com/tavernww

Like this model? Click here to check out the rest of our collection from Goon Master Games   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Goon Master Games @GoonMasterGames If you would like to follow or support this artist, please check out the links below. patreon.com/GoonMasterGames instagram.com/GoonMasterGames myminifactory.com/users/GoonMasterGames

Like this model? Click here to check out the rest of our collection from Goon Master Games   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Goon Master Games @GoonMasterGames If you would like to follow or support this artist, please check out the links below. patreon.com/GoonMasterGames instagram.com/GoonMasterGames myminifactory.com/users/GoonMasterGames

Base Style: Specialized Comes in 32mm scale  Like this model? Click here to check out the rest of our collection from White Werewolf Tavern   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: White Werewolf Tavern @WWTavern If you would like to follow or support this artist, please check out the links below. patreon.com/whitewerewolftavern www.instagram.com/wwtavern myminifactory.com/users/WWTavern facebook.com/miniatures3d twitter.com/tavernww

Base Style: Specialized Comes in 32mm scaleBundle includes all 6 models  Like this model? Click here to check out the rest of our collection from White Werewolf Tavern   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: White Werewolf Tavern @WWTavern If you would like to follow or support this artist, please check out the links below. patreon.com/whitewerewolftavern www.instagram.com/wwtavern myminifactory.com/users/WWTavern facebook.com/miniatures3d twitter.com/tavernww

Base Style: Specialized Comes in 32mm scaleBundle includes all 6 models  Like this model? Click here to check out the rest of our collection from White Werewolf Tavern   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: White Werewolf Tavern @WWTavern If you would like to follow or support this artist, please check out the links below. patreon.com/whitewerewolftavern www.instagram.com/wwtavern myminifactory.com/users/WWTavern facebook.com/miniatures3d twitter.com/tavernww

Base Style: Specialized Comes in 32mm or 75mm scale   Like this model? Click here to check out the rest of our collection from White Werewolf Tavern   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: White Werewolf Tavern @WWTavern If you would like to follow or support this artist, please check out the links below. patreon.com/whitewerewolftavern www.instagram.com/wwtavern myminifactory.com/users/WWTavern facebook.com/miniatures3d twitter.com/tavernww

Model is approximately 93mm tall excluding the stand.     Like this model? Click here to check out the rest of our collection from White Werewolf Tavern   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: White Werewolf Tavern @WWTavern If you would like to follow or support this artist, please check out the links below. patreon.com/whitewerewolftavern www.instagram.com/wwtavern myminifactory.com/users/WWTavern facebook.com/miniatures3d twitter.com/tavernww

Size: 111.5mm x 26mm x 119mm   Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Hell Terrain - A - 87.5mm x 99mm x 49.5mm Hell Terrain - B - 58mm x 109mm x 43.5mm Hell Terrain - C - 87.5mm x 99mm x 23.5mm Hell Terrain - D - 70.5mm x 73.5mm x 12mm Hell Terrain - E - 71mm x 74.5mm x 28mm Hell Terrain - F - 66mm x 80.5mm x 14mm Hell Terrain - G - 66mm x 81mm x 34mm Comes in 32mm scaleBundle includes all 7 modelsLike this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Comes in 32mm scale    Like this model? Click here to check out the rest of our collection from Goon Master Games   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Goon Master Games @GoonMasterGames If you would like to follow or support this artist, please check out the links below. patreon.com/GoonMasterGames instagram.com/GoonMasterGames myminifactory.com/users/GoonMasterGames

Approximate size: Mole Rat Warrior - 1 - 22.5mm x 27mm x 28.5mm Mole Rat Warrior - 2 - 23mm x 30.5mm x 29mm Mole Rat Warrior - 3 - 28mm x 28mm x 28mm Mole Rat Warrior - 4 - 27.5mm x 27.5mm x 28.5mm Mole Rat Warrior - 5 - 33mm x 24mm x 28.5mm Mole Rat Warrior - 6 - 29mm x 25mm x 36mm Mole Rat Warrior - 7 - 23.5mm x 27.5mm x 28.5mm Mole Rat Warrior - 8 - 24mm x 30.5mm x 28.5mm Base Info: Crystal Cave - 25mm - RoundComes in 32mm scale Bundle includes all 8 modelsLike this model? Click here to check out the rest of our collection from Goon Master Games   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Goon Master Games @GoonMasterGames If you would like to follow or support this artist, please check out the links below. patreon.com/GoonMasterGames instagram.com/GoonMasterGames myminifactory.com/users/GoonMasterGames

Base Style: Specialized Comes in 32mm or 75mm scale     Like this model? Click here to check out the rest of our collection from White Werewolf Tavern   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: White Werewolf Tavern @WWTavern If you would like to follow or support this artist, please check out the links below. patreon.com/whitewerewolftavern www.instagram.com/wwtavern myminifactory.com/users/WWTavern facebook.com/miniatures3d twitter.com/tavernww

Approximate size: Ravager Guard - A - 51.5mm x 42mm x 58.5mm Ravager Guard - B - 38mm x 32mm x 40.5mm Base Info: Ravager Guard - A - 50mm - Belowground - Round Ravager Guard - B - 35mm - Belowground - Round Comes in 32mm scaleBundle includes both models  Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Ravager Priest - A - 42mm x 30.5mm x 50.5mm Ravager Priest - B - 75mm x 50mm x 33mm Base Info: Ravager Priest - A - 35mm - Belowground - Round Ravager Priest - B - 75mm - Belowground - Round Comes in 32mm scaleBundle includes both models  Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Ravager Warrior - A - 55.5mm x 35.5mm x 49mm Ravager Warrior - B - 51.5mm x 36mm x 42mm Ravager Warrior - C - 36mm x 40.5mm x 32mm Base Info: Ravager Warrior - A - 60mm - Belowground - Round Ravager Warrior - B - 35mm - Belowground - Round Ravager Warrior - C - 35mm - Belowground - Round Comes in 32mm scaleBundle includes all 3 models  Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: 150.5mm x 64mm x 102mmBase Info: Belowground - 100mm - RoundComes in 32mm scale  Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Like this model? Click here to check out the rest of our collection from Goon Master Games   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Goon Master Games @GoonMasterGames If you would like to follow or support this artist, please check out the links below. patreon.com/GoonMasterGames instagram.com/GoonMasterGames myminifactory.com/users/GoonMasterGames

Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay