![Basing Bits - Owls](http://resinclad.com/cdn/shop/files/Owls_375x.png?v=1691169985 375w,//resinclad.com/cdn/shop/files/Owls_410x.png?v=1691169985 410w,//resinclad.com/cdn/shop/files/Owls_520x.png?v=1691169985 520w,//resinclad.com/cdn/shop/files/Owls_576x.png?v=1691169985 576w,//resinclad.com/cdn/shop/files/Owls_768x.png?v=1691169985 768w,//resinclad.com/cdn/shop/files/Owls_992x.png?v=1691169985 992w,//resinclad.com/cdn/shop/files/Owls_1024x.png?v=1691169985 1024w,//resinclad.com/cdn/shop/files/Owls_1280x.png?v=1691169985 1280w)
Basing Bits - Owls
$8.99
Basing Bits are designed to add flare to your miniature bases and terrain
Comes in 32mm scale
Includes all 5 models
Like this model? Click here to check out the rest of our collection from Goon Master Games
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Goon Master Games
@GoonMasterGames
If you would like to follow or support this artist, please check out the links below.
patreon.com/GoonMasterGames
instagram.com/GoonMasterGames
myminifactory.com/users/GoonMasterGames
![Basing Bits - Palm Leaves](http://resinclad.com/cdn/shop/files/PalmLeaves_375x.png?v=1691169961 375w,//resinclad.com/cdn/shop/files/PalmLeaves_410x.png?v=1691169961 410w,//resinclad.com/cdn/shop/files/PalmLeaves_520x.png?v=1691169961 520w,//resinclad.com/cdn/shop/files/PalmLeaves_576x.png?v=1691169961 576w,//resinclad.com/cdn/shop/files/PalmLeaves_768x.png?v=1691169961 768w,//resinclad.com/cdn/shop/files/PalmLeaves_992x.png?v=1691169961 992w,//resinclad.com/cdn/shop/files/PalmLeaves_1024x.png?v=1691169961 1024w,//resinclad.com/cdn/shop/files/PalmLeaves_1280x.png?v=1691169961 1280w)
Basing Bits - Palm Leaves
$6.99
Basing Bits are designed to add flare to your miniature bases and terrain
Comes in 32mm scale
Includes all 5 models
Like this model? Click here to check out the rest of our collection from Goon Master Games
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Goon Master Games
@GoonMasterGames
If you would like to follow or support this artist, please check out the links below.
patreon.com/GoonMasterGames
instagram.com/GoonMasterGames
myminifactory.com/users/GoonMasterGames
![Basing Bits - Panels](http://resinclad.com/cdn/shop/files/Panels_375x.png?v=1691169854 375w,//resinclad.com/cdn/shop/files/Panels_410x.png?v=1691169854 410w,//resinclad.com/cdn/shop/files/Panels_520x.png?v=1691169854 520w,//resinclad.com/cdn/shop/files/Panels_576x.png?v=1691169854 576w,//resinclad.com/cdn/shop/files/Panels_768x.png?v=1691169854 768w,//resinclad.com/cdn/shop/files/Panels_992x.png?v=1691169854 992w,//resinclad.com/cdn/shop/files/Panels_1024x.png?v=1691169854 1024w,//resinclad.com/cdn/shop/files/Panels_1280x.png?v=1691169854 1280w)
Basing Bits - Panels
$7.99
Basing Bits are designed to add flare to your miniature bases and terrain
Comes in 32mm scale
Includes all 5 models
Like this model? Click here to check out the rest of our collection from Goon Master Games
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Goon Master Games
@GoonMasterGames
If you would like to follow or support this artist, please check out the links below.
patreon.com/GoonMasterGames
instagram.com/GoonMasterGames
myminifactory.com/users/GoonMasterGames
![Basing Bits - Pink Quill](http://resinclad.com/cdn/shop/files/PinkQuill_375x.png?v=1691169810 375w,//resinclad.com/cdn/shop/files/PinkQuill_410x.png?v=1691169810 410w,//resinclad.com/cdn/shop/files/PinkQuill_520x.png?v=1691169810 520w,//resinclad.com/cdn/shop/files/PinkQuill_576x.png?v=1691169810 576w,//resinclad.com/cdn/shop/files/PinkQuill_768x.png?v=1691169810 768w,//resinclad.com/cdn/shop/files/PinkQuill_992x.png?v=1691169810 992w,//resinclad.com/cdn/shop/files/PinkQuill_1024x.png?v=1691169810 1024w,//resinclad.com/cdn/shop/files/PinkQuill_1280x.png?v=1691169810 1280w)
Basing Bits - Pink Quill
$6.99
Basing Bits are designed to add flare to your miniature bases and terrain
Comes in 32mm scale
Includes all 5 models
Like this model? Click here to check out the rest of our collection from Goon Master Games
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Goon Master Games
@GoonMasterGames
If you would like to follow or support this artist, please check out the links below.
patreon.com/GoonMasterGames
instagram.com/GoonMasterGames
myminifactory.com/users/GoonMasterGames
![Basing Bits - Pitcher Plant](http://resinclad.com/cdn/shop/files/PitcherPlant_375x.png?v=1691169763 375w,//resinclad.com/cdn/shop/files/PitcherPlant_410x.png?v=1691169763 410w,//resinclad.com/cdn/shop/files/PitcherPlant_520x.png?v=1691169763 520w,//resinclad.com/cdn/shop/files/PitcherPlant_576x.png?v=1691169763 576w,//resinclad.com/cdn/shop/files/PitcherPlant_768x.png?v=1691169763 768w,//resinclad.com/cdn/shop/files/PitcherPlant_992x.png?v=1691169763 992w,//resinclad.com/cdn/shop/files/PitcherPlant_1024x.png?v=1691169763 1024w,//resinclad.com/cdn/shop/files/PitcherPlant_1280x.png?v=1691169763 1280w)
Basing Bits - Pitcher Plant
$8.99
Basing Bits are designed to add flare to your miniature bases and terrain
Comes in 32mm scale
Includes all 7 models
Like this model? Click here to check out the rest of our collection from Goon Master Games
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Goon Master Games
@GoonMasterGames
If you would like to follow or support this artist, please check out the links below.
patreon.com/GoonMasterGames
instagram.com/GoonMasterGames
myminifactory.com/users/GoonMasterGames
![Basing Bits - Pug](http://resinclad.com/cdn/shop/files/Pug_375x.png?v=1691169677 375w,//resinclad.com/cdn/shop/files/Pug_410x.png?v=1691169677 410w,//resinclad.com/cdn/shop/files/Pug_520x.png?v=1691169677 520w,//resinclad.com/cdn/shop/files/Pug_576x.png?v=1691169677 576w,//resinclad.com/cdn/shop/files/Pug_768x.png?v=1691169677 768w,//resinclad.com/cdn/shop/files/Pug_992x.png?v=1691169677 992w,//resinclad.com/cdn/shop/files/Pug_1024x.png?v=1691169677 1024w,//resinclad.com/cdn/shop/files/Pug_1280x.png?v=1691169677 1280w)
Basing Bits - Pug
$7.99
Basing Bits are designed to add flare to your miniature bases and terrain
Comes in 32mm scale
Includes all 5 models
Like this model? Click here to check out the rest of our collection from Goon Master Games
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Goon Master Games
@GoonMasterGames
If you would like to follow or support this artist, please check out the links below.
patreon.com/GoonMasterGames
instagram.com/GoonMasterGames
myminifactory.com/users/GoonMasterGames
![Basing Bits - Rabbits](http://resinclad.com/cdn/shop/files/Rabbit_375x.png?v=1691169560 375w,//resinclad.com/cdn/shop/files/Rabbit_410x.png?v=1691169560 410w,//resinclad.com/cdn/shop/files/Rabbit_520x.png?v=1691169560 520w,//resinclad.com/cdn/shop/files/Rabbit_576x.png?v=1691169560 576w,//resinclad.com/cdn/shop/files/Rabbit_768x.png?v=1691169560 768w,//resinclad.com/cdn/shop/files/Rabbit_992x.png?v=1691169560 992w,//resinclad.com/cdn/shop/files/Rabbit_1024x.png?v=1691169560 1024w,//resinclad.com/cdn/shop/files/Rabbit_1280x.png?v=1691169560 1280w)
Basing Bits - Rabbits
$8.99
Basing Bits are designed to add flare to your miniature bases and terrain
Comes in 32mm scale
Includes all 6 models
Like this model? Click here to check out the rest of our collection from Goon Master Games
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Goon Master Games
@GoonMasterGames
If you would like to follow or support this artist, please check out the links below.
patreon.com/GoonMasterGames
instagram.com/GoonMasterGames
myminifactory.com/users/GoonMasterGames
![Basing Bits - Red Ginger](http://resinclad.com/cdn/shop/files/RedGinger_375x.png?v=1691169292 375w,//resinclad.com/cdn/shop/files/RedGinger_410x.png?v=1691169292 410w,//resinclad.com/cdn/shop/files/RedGinger_520x.png?v=1691169292 520w,//resinclad.com/cdn/shop/files/RedGinger_576x.png?v=1691169292 576w,//resinclad.com/cdn/shop/files/RedGinger_768x.png?v=1691169292 768w,//resinclad.com/cdn/shop/files/RedGinger_992x.png?v=1691169292 992w,//resinclad.com/cdn/shop/files/RedGinger_1024x.png?v=1691169292 1024w,//resinclad.com/cdn/shop/files/RedGinger_1280x.png?v=1691169292 1280w)
Basing Bits - Red Ginger
$8.99
Basing Bits are designed to add flare to your miniature bases and terrain
Comes in 32mm scale
Includes all 5 models
Like this model? Click here to check out the rest of our collection from Goon Master Games
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Goon Master Games
@GoonMasterGames
If you would like to follow or support this artist, please check out the links below.
patreon.com/GoonMasterGames
instagram.com/GoonMasterGames
myminifactory.com/users/GoonMasterGames
![Basing Bits - Retro Tech](http://resinclad.com/cdn/shop/files/RetroTech_375x.png?v=1691169195 375w,//resinclad.com/cdn/shop/files/RetroTech_410x.png?v=1691169195 410w,//resinclad.com/cdn/shop/files/RetroTech_520x.png?v=1691169195 520w,//resinclad.com/cdn/shop/files/RetroTech_576x.png?v=1691169195 576w,//resinclad.com/cdn/shop/files/RetroTech_768x.png?v=1691169195 768w,//resinclad.com/cdn/shop/files/RetroTech_992x.png?v=1691169195 992w,//resinclad.com/cdn/shop/files/RetroTech_1024x.png?v=1691169195 1024w,//resinclad.com/cdn/shop/files/RetroTech_1280x.png?v=1691169195 1280w)
Basing Bits - Retro Tech
$9.99
Basing Bits are designed to add flare to your miniature bases and terrain
Comes in 32mm scale
Includes all 10 models
Like this model? Click here to check out the rest of our collection from Goon Master Games
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Goon Master Games
@GoonMasterGames
If you would like to follow or support this artist, please check out the links below.
patreon.com/GoonMasterGames
instagram.com/GoonMasterGames
myminifactory.com/users/GoonMasterGames
![Basing Bits - Roots](http://resinclad.com/cdn/shop/files/Roots_375x.png?v=1691169155 375w,//resinclad.com/cdn/shop/files/Roots_410x.png?v=1691169155 410w,//resinclad.com/cdn/shop/files/Roots_520x.png?v=1691169155 520w,//resinclad.com/cdn/shop/files/Roots_576x.png?v=1691169155 576w,//resinclad.com/cdn/shop/files/Roots_768x.png?v=1691169155 768w,//resinclad.com/cdn/shop/files/Roots_992x.png?v=1691169155 992w,//resinclad.com/cdn/shop/files/Roots_1024x.png?v=1691169155 1024w,//resinclad.com/cdn/shop/files/Roots_1280x.png?v=1691169155 1280w)
Basing Bits - Roots
$8.99
Basing Bits are designed to add flare to your miniature bases and terrain
Comes in 32mm scale
Includes all 6 models
Like this model? Click here to check out the rest of our collection from Goon Master Games
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Goon Master Games
@GoonMasterGames
If you would like to follow or support this artist, please check out the links below.
patreon.com/GoonMasterGames
instagram.com/GoonMasterGames
myminifactory.com/users/GoonMasterGames
![Basing Bits - Round Rocks](http://resinclad.com/cdn/shop/files/RoundRocks_375x.png?v=1691169100 375w,//resinclad.com/cdn/shop/files/RoundRocks_410x.png?v=1691169100 410w,//resinclad.com/cdn/shop/files/RoundRocks_520x.png?v=1691169100 520w,//resinclad.com/cdn/shop/files/RoundRocks_576x.png?v=1691169100 576w,//resinclad.com/cdn/shop/files/RoundRocks_768x.png?v=1691169100 768w,//resinclad.com/cdn/shop/files/RoundRocks_992x.png?v=1691169100 992w,//resinclad.com/cdn/shop/files/RoundRocks_1024x.png?v=1691169100 1024w,//resinclad.com/cdn/shop/files/RoundRocks_1280x.png?v=1691169100 1280w)
Basing Bits - Round Rocks
$10.99
Basing Bits are designed to add flare to your miniature bases and terrain
Comes in 32mm scale
Includes all 17 models
Like this model? Click here to check out the rest of our collection from Goon Master Games
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Goon Master Games
@GoonMasterGames
If you would like to follow or support this artist, please check out the links below.
patreon.com/GoonMasterGames
instagram.com/GoonMasterGames
myminifactory.com/users/GoonMasterGames
![Basing Bits - Sandbags](http://resinclad.com/cdn/shop/files/Sandbags_375x.png?v=1691168949 375w,//resinclad.com/cdn/shop/files/Sandbags_410x.png?v=1691168949 410w,//resinclad.com/cdn/shop/files/Sandbags_520x.png?v=1691168949 520w,//resinclad.com/cdn/shop/files/Sandbags_576x.png?v=1691168949 576w,//resinclad.com/cdn/shop/files/Sandbags_768x.png?v=1691168949 768w,//resinclad.com/cdn/shop/files/Sandbags_992x.png?v=1691168949 992w,//resinclad.com/cdn/shop/files/Sandbags_1024x.png?v=1691168949 1024w,//resinclad.com/cdn/shop/files/Sandbags_1280x.png?v=1691168949 1280w)
Basing Bits - Sandbags
$9.99
Basing Bits are designed to add flare to your miniature bases and terrain
Comes in 32mm scale
Includes all 10 models
Like this model? Click here to check out the rest of our collection from Goon Master Games
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Goon Master Games
@GoonMasterGames
If you would like to follow or support this artist, please check out the links below.
patreon.com/GoonMasterGames
instagram.com/GoonMasterGames
myminifactory.com/users/GoonMasterGames
![Basing Bits - Small Trees](http://resinclad.com/cdn/shop/files/SmallTrees_375x.png?v=1691168878 375w,//resinclad.com/cdn/shop/files/SmallTrees_410x.png?v=1691168878 410w,//resinclad.com/cdn/shop/files/SmallTrees_520x.png?v=1691168878 520w,//resinclad.com/cdn/shop/files/SmallTrees_576x.png?v=1691168878 576w,//resinclad.com/cdn/shop/files/SmallTrees_768x.png?v=1691168878 768w,//resinclad.com/cdn/shop/files/SmallTrees_992x.png?v=1691168878 992w,//resinclad.com/cdn/shop/files/SmallTrees_1024x.png?v=1691168878 1024w,//resinclad.com/cdn/shop/files/SmallTrees_1280x.png?v=1691168878 1280w)
Basing Bits - Small Trees
$9.99
Basing Bits are designed to add flare to your miniature bases and terrain
Comes in 32mm scale
Includes all 5 models
Like this model? Click here to check out the rest of our collection from Goon Master Games
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Goon Master Games
@GoonMasterGames
If you would like to follow or support this artist, please check out the links below.
patreon.com/GoonMasterGames
instagram.com/GoonMasterGames
myminifactory.com/users/GoonMasterGames
![Basing Bits - Snakes](http://resinclad.com/cdn/shop/files/Snakes_375x.png?v=1691168816 375w,//resinclad.com/cdn/shop/files/Snakes_410x.png?v=1691168816 410w,//resinclad.com/cdn/shop/files/Snakes_520x.png?v=1691168816 520w,//resinclad.com/cdn/shop/files/Snakes_576x.png?v=1691168816 576w,//resinclad.com/cdn/shop/files/Snakes_768x.png?v=1691168816 768w,//resinclad.com/cdn/shop/files/Snakes_992x.png?v=1691168816 992w,//resinclad.com/cdn/shop/files/Snakes_1024x.png?v=1691168816 1024w,//resinclad.com/cdn/shop/files/Snakes_1280x.png?v=1691168816 1280w)
Basing Bits - Snakes
$7.99
Basing Bits are designed to add flare to your miniature bases and terrain
Comes in 32mm scale
Includes all 5 models
Like this model? Click here to check out the rest of our collection from Goon Master Games
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Goon Master Games
@GoonMasterGames
If you would like to follow or support this artist, please check out the links below.
patreon.com/GoonMasterGames
instagram.com/GoonMasterGames
myminifactory.com/users/GoonMasterGames
![Basing Bits - Speakers](http://resinclad.com/cdn/shop/files/Speakers_375x.png?v=1691168724 375w,//resinclad.com/cdn/shop/files/Speakers_410x.png?v=1691168724 410w,//resinclad.com/cdn/shop/files/Speakers_520x.png?v=1691168724 520w,//resinclad.com/cdn/shop/files/Speakers_576x.png?v=1691168724 576w,//resinclad.com/cdn/shop/files/Speakers_768x.png?v=1691168724 768w,//resinclad.com/cdn/shop/files/Speakers_992x.png?v=1691168724 992w,//resinclad.com/cdn/shop/files/Speakers_1024x.png?v=1691168724 1024w,//resinclad.com/cdn/shop/files/Speakers_1280x.png?v=1691168724 1280w)
Basing Bits - Speakers
$7.99
Basing Bits are designed to add flare to your miniature bases and terrain
Comes in 32mm scale
Includes all 5 models
Like this model? Click here to check out the rest of our collection from Goon Master Games
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Goon Master Games
@GoonMasterGames
If you would like to follow or support this artist, please check out the links below.
patreon.com/GoonMasterGames
instagram.com/GoonMasterGames
myminifactory.com/users/GoonMasterGames
![Basing Bits - Spiders](http://resinclad.com/cdn/shop/files/Spiders_375x.png?v=1691168674 375w,//resinclad.com/cdn/shop/files/Spiders_410x.png?v=1691168674 410w,//resinclad.com/cdn/shop/files/Spiders_520x.png?v=1691168674 520w,//resinclad.com/cdn/shop/files/Spiders_576x.png?v=1691168674 576w,//resinclad.com/cdn/shop/files/Spiders_768x.png?v=1691168674 768w,//resinclad.com/cdn/shop/files/Spiders_992x.png?v=1691168674 992w,//resinclad.com/cdn/shop/files/Spiders_1024x.png?v=1691168674 1024w,//resinclad.com/cdn/shop/files/Spiders_1280x.png?v=1691168674 1280w)
Basing Bits - Spiders
$8.99
Basing Bits are designed to add flare to your miniature bases and terrain
Comes in 32mm scale
Includes all 5 models
Like this model? Click here to check out the rest of our collection from Goon Master Games
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Goon Master Games
@GoonMasterGames
If you would like to follow or support this artist, please check out the links below.
patreon.com/GoonMasterGames
instagram.com/GoonMasterGames
myminifactory.com/users/GoonMasterGames
![Basing Bits - Steel Girder](http://resinclad.com/cdn/shop/files/SteelGirder_375x.png?v=1691168406 375w,//resinclad.com/cdn/shop/files/SteelGirder_410x.png?v=1691168406 410w,//resinclad.com/cdn/shop/files/SteelGirder_520x.png?v=1691168406 520w,//resinclad.com/cdn/shop/files/SteelGirder_576x.png?v=1691168406 576w,//resinclad.com/cdn/shop/files/SteelGirder_768x.png?v=1691168406 768w,//resinclad.com/cdn/shop/files/SteelGirder_992x.png?v=1691168406 992w,//resinclad.com/cdn/shop/files/SteelGirder_1024x.png?v=1691168406 1024w,//resinclad.com/cdn/shop/files/SteelGirder_1280x.png?v=1691168406 1280w)
Basing Bits - Steel Girder
$10.99
Basing Bits are designed to add flare to your miniature bases and terrain
Comes in 32mm scale
Includes all 10 models
Like this model? Click here to check out the rest of our collection from Goon Master Games
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Goon Master Games
@GoonMasterGames
If you would like to follow or support this artist, please check out the links below.
patreon.com/GoonMasterGames
instagram.com/GoonMasterGames
myminifactory.com/users/GoonMasterGames
![Basing Bits - Steel Truss](http://resinclad.com/cdn/shop/files/SteelTruss_375x.png?v=1691168343 375w,//resinclad.com/cdn/shop/files/SteelTruss_410x.png?v=1691168343 410w,//resinclad.com/cdn/shop/files/SteelTruss_520x.png?v=1691168343 520w,//resinclad.com/cdn/shop/files/SteelTruss_576x.png?v=1691168343 576w,//resinclad.com/cdn/shop/files/SteelTruss_768x.png?v=1691168343 768w,//resinclad.com/cdn/shop/files/SteelTruss_992x.png?v=1691168343 992w,//resinclad.com/cdn/shop/files/SteelTruss_1024x.png?v=1691168343 1024w,//resinclad.com/cdn/shop/files/SteelTruss_1280x.png?v=1691168343 1280w)
Basing Bits - Steel Truss
$7.99
Basing Bits are designed to add flare to your miniature bases and terrain
Comes in 32mm scale
Includes all 5 models
Like this model? Click here to check out the rest of our collection from Goon Master Games
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Goon Master Games
@GoonMasterGames
If you would like to follow or support this artist, please check out the links below.
patreon.com/GoonMasterGames
instagram.com/GoonMasterGames
myminifactory.com/users/GoonMasterGames
![Basing Bits - Tropical Hibiscus](http://resinclad.com/cdn/shop/files/TropicalHibiscus_375x.png?v=1691168248 375w,//resinclad.com/cdn/shop/files/TropicalHibiscus_410x.png?v=1691168248 410w,//resinclad.com/cdn/shop/files/TropicalHibiscus_520x.png?v=1691168248 520w,//resinclad.com/cdn/shop/files/TropicalHibiscus_576x.png?v=1691168248 576w,//resinclad.com/cdn/shop/files/TropicalHibiscus_768x.png?v=1691168248 768w,//resinclad.com/cdn/shop/files/TropicalHibiscus_992x.png?v=1691168248 992w,//resinclad.com/cdn/shop/files/TropicalHibiscus_1024x.png?v=1691168248 1024w,//resinclad.com/cdn/shop/files/TropicalHibiscus_1280x.png?v=1691168248 1280w)
Basing Bits - Tropical Hibiscus
$7.99
Basing Bits are designed to add flare to your miniature bases and terrain
Comes in 32mm scale
Includes all 5 models
Like this model? Click here to check out the rest of our collection from Goon Master Games
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Goon Master Games
@GoonMasterGames
If you would like to follow or support this artist, please check out the links below.
patreon.com/GoonMasterGames
instagram.com/GoonMasterGames
myminifactory.com/users/GoonMasterGames
![Basing Bits - Windy Grass](http://resinclad.com/cdn/shop/files/WindyGrass_375x.png?v=1691168208 375w,//resinclad.com/cdn/shop/files/WindyGrass_410x.png?v=1691168208 410w,//resinclad.com/cdn/shop/files/WindyGrass_520x.png?v=1691168208 520w,//resinclad.com/cdn/shop/files/WindyGrass_576x.png?v=1691168208 576w,//resinclad.com/cdn/shop/files/WindyGrass_768x.png?v=1691168208 768w,//resinclad.com/cdn/shop/files/WindyGrass_992x.png?v=1691168208 992w,//resinclad.com/cdn/shop/files/WindyGrass_1024x.png?v=1691168208 1024w,//resinclad.com/cdn/shop/files/WindyGrass_1280x.png?v=1691168208 1280w)
Basing Bits - Windy Grass
$7.99
Basing Bits are designed to add flare to your miniature bases and terrain
Comes in 32mm scale
Includes all 5 models
Like this model? Click here to check out the rest of our collection from Goon Master Games
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Goon Master Games
@GoonMasterGames
If you would like to follow or support this artist, please check out the links below.
patreon.com/GoonMasterGames
instagram.com/GoonMasterGames
myminifactory.com/users/GoonMasterGames
![Bear Trap](http://resinclad.com/cdn/shop/products/720x720-trap-1_375x.jpg?v=1624158518 375w,//resinclad.com/cdn/shop/products/720x720-trap-1_410x.jpg?v=1624158518 410w,//resinclad.com/cdn/shop/products/720x720-trap-1_520x.jpg?v=1624158518 520w,//resinclad.com/cdn/shop/products/720x720-trap-1_576x.jpg?v=1624158518 576w,//resinclad.com/cdn/shop/products/720x720-trap-1_768x.jpg?v=1624158518 768w,//resinclad.com/cdn/shop/products/720x720-trap-1_992x.jpg?v=1624158518 992w,//resinclad.com/cdn/shop/products/720x720-trap-1_1024x.jpg?v=1624158518 1024w,//resinclad.com/cdn/shop/products/720x720-trap-1_1280x.jpg?v=1624158518 1280w)
![Bear Trap](http://resinclad.com/cdn/shop/products/PXL_20210804_030415940.PORTRAIT_375x.jpg?v=1629310690 375w,//resinclad.com/cdn/shop/products/PXL_20210804_030415940.PORTRAIT_410x.jpg?v=1629310690 410w,//resinclad.com/cdn/shop/products/PXL_20210804_030415940.PORTRAIT_520x.jpg?v=1629310690 520w,//resinclad.com/cdn/shop/products/PXL_20210804_030415940.PORTRAIT_576x.jpg?v=1629310690 576w,//resinclad.com/cdn/shop/products/PXL_20210804_030415940.PORTRAIT_768x.jpg?v=1629310690 768w,//resinclad.com/cdn/shop/products/PXL_20210804_030415940.PORTRAIT_992x.jpg?v=1629310690 992w,//resinclad.com/cdn/shop/products/PXL_20210804_030415940.PORTRAIT_1024x.jpg?v=1629310690 1024w,//resinclad.com/cdn/shop/products/PXL_20210804_030415940.PORTRAIT_1280x.jpg?v=1629310690 1280w)
Bear Trap
$1.00
Size: 21mm x 25.5mm x 5mm
Like this model? Click here to check out the rest of our collection from Goon Master Games
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC. is a licensed distributor of these 3D prints designed by:
Goon Master Games
@GoonMasterGames
If you would like to follow or support this artist, please check out the links below.
patreon.com/GoonMasterGames
instagram.com/GoonMasterGames
myminifactory.com/users/GoonMasterGames
![Bookshelves](http://resinclad.com/cdn/shop/products/Bookshelves_375x.jpg?v=1648133440 375w,//resinclad.com/cdn/shop/products/Bookshelves_410x.jpg?v=1648133440 410w,//resinclad.com/cdn/shop/products/Bookshelves_520x.jpg?v=1648133440 520w,//resinclad.com/cdn/shop/products/Bookshelves_576x.jpg?v=1648133440 576w,//resinclad.com/cdn/shop/products/Bookshelves_768x.jpg?v=1648133440 768w,//resinclad.com/cdn/shop/products/Bookshelves_992x.jpg?v=1648133440 992w,//resinclad.com/cdn/shop/products/Bookshelves_1024x.jpg?v=1648133440 1024w,//resinclad.com/cdn/shop/products/Bookshelves_1280x.jpg?v=1648133440 1280w)
Bookshelves
from $19.99
32mm Scale
Includes all 3 models
Like this model? Click here to check out the rest of our collection from Cast n Play
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Cast n Play
@CastnPlay
If you would like to follow or support this artist, please check out the links below.
patreon.com/CastnPlay
instagram.com/CastnPlay
myminifactory.com/users/CastnPlay
facebook.com/CastnPlayMinis
youtube.com/castnplay
![Cage](http://resinclad.com/cdn/shop/products/720x720-cage-1_375x.jpg?v=1624158508 375w,//resinclad.com/cdn/shop/products/720x720-cage-1_410x.jpg?v=1624158508 410w,//resinclad.com/cdn/shop/products/720x720-cage-1_520x.jpg?v=1624158508 520w,//resinclad.com/cdn/shop/products/720x720-cage-1_576x.jpg?v=1624158508 576w,//resinclad.com/cdn/shop/products/720x720-cage-1_768x.jpg?v=1624158508 768w,//resinclad.com/cdn/shop/products/720x720-cage-1_992x.jpg?v=1624158508 992w,//resinclad.com/cdn/shop/products/720x720-cage-1_1024x.jpg?v=1624158508 1024w,//resinclad.com/cdn/shop/products/720x720-cage-1_1280x.jpg?v=1624158508 1280w)
Cage
$7.99
The top of the model lifts away to allow access to inside of cage.
Size: 48.50mm x 48.50mm x 75mm
Like this model? Click here to check out the rest of our collection from Goon Master Games
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC. is a licensed distributor of these 3D prints designed by:
Goon Master Games
@GoonMasterGames
If you would like to follow or support this artist, please check out the links below.
patreon.com/GoonMasterGames
instagram.com/GoonMasterGames
myminifactory.com/users/GoonMasterGames
![Camp Weapons and Props](http://resinclad.com/cdn/shop/products/CampWeaponsAndProps_CastNPlay_375x.png?v=1644433649 375w,//resinclad.com/cdn/shop/products/CampWeaponsAndProps_CastNPlay_410x.png?v=1644433649 410w,//resinclad.com/cdn/shop/products/CampWeaponsAndProps_CastNPlay_520x.png?v=1644433649 520w,//resinclad.com/cdn/shop/products/CampWeaponsAndProps_CastNPlay_576x.png?v=1644433649 576w,//resinclad.com/cdn/shop/products/CampWeaponsAndProps_CastNPlay_768x.png?v=1644433649 768w,//resinclad.com/cdn/shop/products/CampWeaponsAndProps_CastNPlay_992x.png?v=1644433649 992w,//resinclad.com/cdn/shop/products/CampWeaponsAndProps_CastNPlay_1024x.png?v=1644433649 1024w,//resinclad.com/cdn/shop/products/CampWeaponsAndProps_CastNPlay_1280x.png?v=1644433649 1280w)
Camp Weapons and Props
$24.99
32mm Scale
Includes all 13 models
Like this model? Click here to check out the rest of our collection from Cast n Play
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Cast n Play
@CastnPlay
If you would like to follow or support this artist, please check out the links below.
patreon.com/CastnPlay
instagram.com/CastnPlay
myminifactory.com/users/CastnPlay
facebook.com/CastnPlayMinis
youtube.com/castnplay
![Cannon](http://resinclad.com/cdn/shop/products/Cannon_375x.png?v=1670423810 375w,//resinclad.com/cdn/shop/products/Cannon_410x.png?v=1670423810 410w,//resinclad.com/cdn/shop/products/Cannon_520x.png?v=1670423810 520w,//resinclad.com/cdn/shop/products/Cannon_576x.png?v=1670423810 576w,//resinclad.com/cdn/shop/products/Cannon_768x.png?v=1670423810 768w,//resinclad.com/cdn/shop/products/Cannon_992x.png?v=1670423810 992w,//resinclad.com/cdn/shop/products/Cannon_1024x.png?v=1670423810 1024w,//resinclad.com/cdn/shop/products/Cannon_1280x.png?v=1670423810 1280w)
Cannon
$7.99
Size:
Cannon - 33.5mm x 38.5mm x 30.5mm
Cannon Balls - 11mm x 10mm x 10.5mm
Like this model? Click here to check out the rest of our collection from Goon Master Games
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC. is a licensed distributor of these 3D prints designed by:
Goon Master Games
@GoonMasterGames
If you would like to follow or support this artist, please check out the links below.
patreon.com/GoonMasterGames
instagram.com/GoonMasterGames
myminifactory.com/users/GoonMasterGames