Products

Approximate size: 36.5mm x 25mm x 43.5mm Base Info: Barbarian Punk Base     Like this model? Click here to check out the rest of our collection from Chibiatures Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes. All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time. All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring. The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes. Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out. Resinclad LLC is a licensed distributor of these 3D prints designed by: Chibiatures @Chibiatures If you would like to follow or support this artist, please check out the link below. Chibiatures.com

Approximate size: Low Path I 01 - 88.5mm x 134mm x 28mm Low Path I 02 - 83.5mm x 99.5mm x 29mm Low Path S - 131mm x 134mm x 27.5mm Low Path Curve - 93.5mm x 129mm x 28.5mm Low Path X - 87.5mm x 119mm x 29.5mm Tall Path Curve - 108mm x 116.5mm x 67mm Tall Path Half Curve - 144mm x 110.5mm x 66.5mm Tall Path End - 97mm x 105.5mm x 71.5mm Tall Path I 01 - 96mm x 141mm x 68.5mm Tall Path I 02 - 100mm x 141.5mm x 66.5mm Tall Path L - 104.5mm x 149.5mm x 68mm Tall Path S 01 - 106mm x 152.5mm x 77mm Tall Path S 02 - 123mm x 110mm x 64.5mm Tall Path X - 114mm x 116.5mm x 68.5mm Cave Ramp - 127mm x 90mm x 62.5mm Comes in 32mm scaleBundle includes all 15 models  Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Arch - 84mm x 53mm x 80mm Rocks Column - 60.5mm x 67mm x 74.5mm Rock Crystals - 65mm x 66mm x 59mm Cave Rock Group A - 55mm x 46.5mm x 39.5mm Cave Rock Group B - 71mm x 53.5mm x 84mm Cave Rock Platform A - 75mm x 51mm x 70mm Cave Rock Platform B - 77.5mm x 44.5mm x 88.5mm Cave Rock Stalagmites - 45.5mm x 39mm x 65.5mm Spike Rock Crystals - 66.5mm x 43mm x 43.5mm Squeeze Tunnel - 89.5mm x 56mm x 67.5mm Stalagmite Group - 54mm x 32.5mm x 44.5mm Steep Rock A - 55.5mm x 65mm x 54mm Steep Rock B - 76mm x 53.5mm x 47mm Vertical Rocks A - 36mm x 37mm x 52.5.mm Vertical Rocks B - 32.5mm x 38mm x 51.5mm Comes in 32mm scaleBundle includes all 15 models  Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Big Rock Crystal - 107mm x 141.5mm x 198mm Cave Entrance 01 - 130mm x 134.5mm x 84mm Cave Entrance 02 - 160mm x 129.5mm x 68mm Crystal Bit A - 47.5mm x 47.5mm x 54.5mm Crystal Bit B - 40mm x 43.5mm x 61mm Crystal Bit C - 42mm x 45.5mm x 50.5mm Cave Platform 01 - 130.5mm x 135.5mm x 93.5mm Cave Platform 02 - 116mm x 143mm x 56.5mm Cave Platform 03 - 119mm x 151.5mm x 66.5mm Rock Formation - 127mm x 75.5mm x 102mm Small Platform - 137.5mm x 120mm x 87.5mm Stalagmites - 20mm x 20.5mm x 60mm Tall Platform 01 - 108.5mm x 123.5mm x 127.5mm Tall Platform 02 - 138mm x 141mm x 74mm Tall Platform 03 - 146mm x 226.5mm x 123.5mm Comes in 32mm scaleBundle includes all 15 models  Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Base Size: 35mm Base Style: Cave Floor Bases come attached to models Bundle includes both models Like this model? Click here to check out the rest of our collection from Goon Master Games   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC. is a licensed distributor of these 3D prints designed by: Goon Master Games @GoonMasterGames If you would like to follow or support this artist, please check out the links below. patreon.com/GoonMasterGames instagram.com/GoonMasterGames myminifactory.com/users/GoonMasterGames

Approximate size: 25mm x 103.5mm x 34mm Base not included Comes in 32mm scale   Like this model? Click here to check out the rest of our collection from 3DIPStudios   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: 3DIPStudios @3DIPStudios If you would like to follow or support this artist, please check out the link below. instagram.com/3dipstudios

Approximate size: 52.5mm x 148.5mm x 49.5mm Base not included Comes in 32mm scale   Like this model? Click here to check out the rest of our collection from 3DIPStudios   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: 3DIPStudios @3DIPStudios If you would like to follow or support this artist, please check out the link below. instagram.com/3dipstudios

Base Size: 25mm Base Style: Plain Includes all 5 models   Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: 32.5mm x 110.5mm x 31.5mm Base not included Comes in 32mm scale   Like this model? Click here to check out the rest of our collection from 3DIPStudios   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: 3DIPStudios @3DIPStudios If you would like to follow or support this artist, please check out the link below. instagram.com/3dipstudios

Approximate size: 31mm x 21mm x 41.5mmBase Info: Skeleton Punk - 40mmLike this model? Click here to check out the rest of our collection from Chibiatures Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes. All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time. All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring. The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes. Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out. Resinclad LLC is a licensed distributor of these 3D prints designed by: Chibiatures @Chibiatures If you would like to follow or support this artist, please check out the link below. Chibiatures.com

Approximate size: 41mm x 158.5mm x 69.5mm Base not included Comes in 32mm scale   Like this model? Click here to check out the rest of our collection from 3DIPStudios   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: 3DIPStudios @3DIPStudios If you would like to follow or support this artist, please check out the link below. instagram.com/3dipstudios

Approximate size: 34mm x 140mm x 57.5mm Base not included Comes in 32mm scale   Like this model? Click here to check out the rest of our collection from 3DIPStudios   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: 3DIPStudios @3DIPStudios If you would like to follow or support this artist, please check out the link below. instagram.com/3dipstudios