All products
3DIPStudios
Adventurer's Toolkit
All Models
Black Skull Studio
Busts
Cast n Play
Chibiatures
Crab Miniatures
Dark Realms Forge
Dioramas
Galaad Miniatures
Goon Master Games
Hold My Miniatures
Manuel Boria
Mini Bases
Miniatures
Painted Models
QB Works
Rocket Pig Games
Terrain
The Witchguild
ToyDoy Miniatures
White Werewolf Tavern
Witchsong Miniatures

Astra Alchemists Bundle
from $9.49
Approximate size:
Astra Alchemist - A - 37mm x 35mm x 43mm
Astra Alchemist - B - 41.5mm x 35.5mm x 39.5mm
Astra Alchemist - C - 34mm x 25mm x 43mm
Astra Alchemist - D - 35.5mm x 25.5mm x 39.5mm
Base Info: Deck - 35mm - RoundComes in 32mm scaleBundle includes all 4 models
Like this model? Click here to check out the rest of our collection from Cast n Play
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Cast n Play
@CastnPlay
If you would like to follow or support this artist, please check out the links below.
patreon.com/CastnPlay
instagram.com/CastnPlay
myminifactory.com/users/CastnPlay
facebook.com/CastnPlayMinis
youtube.com/castnplay

Bloodlust Bucaneers Bundle
from $10.99
Approximate size:
Bloodlust Bucaneer - A - 37mm x 27mm x 47.5mm
Bloodlust Bucaneer - B - 40.5mm x 26mm x 51mm
Bloodlust Bucaneer - C - 36mm x 27.5mm x 40mm
Bloodlust Bucaneer - D - 37mm x 26.5mm x 41.5mm
Base Info: Deck - 35mm - RoundComes in 32mm scaleBundle includes all 4 models
Like this model? Click here to check out the rest of our collection from Cast n Play
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Cast n Play
@CastnPlay
If you would like to follow or support this artist, please check out the links below.
patreon.com/CastnPlay
instagram.com/CastnPlay
myminifactory.com/users/CastnPlay
facebook.com/CastnPlayMinis
youtube.com/castnplay

Boarding Infantry Bundle
from $11.74
Approximate size:
Boarding Infantry - A - 38mm x 27mm x 39mm
Boarding Infantry - B - 37.5mm x 24.5mm x 43mm
Boarding Infantry - C - 34mm x 33mm x 45mm
Boarding Infantry - D - 35.5mm x 24.5mm x 43mm
Base Info: Deck - 35mm - RoundComes in 32mm scaleBundle includes all 4 models
Like this model? Click here to check out the rest of our collection from Cast n Play
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Cast n Play
@CastnPlay
If you would like to follow or support this artist, please check out the links below.
patreon.com/CastnPlay
instagram.com/CastnPlay
myminifactory.com/users/CastnPlay
facebook.com/CastnPlayMinis
youtube.com/castnplay

Cosmo Manta
from $35.74
Approximate size: 129.5mm x 142.5mm x 113.5mmComes in 32mm scale
Like this model? Click here to check out the rest of our collection from Cast n Play
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Cast n Play
@CastnPlay
If you would like to follow or support this artist, please check out the links below.
patreon.com/CastnPlay
instagram.com/CastnPlay
myminifactory.com/users/CastnPlay
facebook.com/CastnPlayMinis
youtube.com/castnplay

Cosmo Rogues Bundle
from $9.49
Approximate size:
Cosmo Rogue - A - 36.5mm x 24.5mm x 43mm
Cosmo Rogue - B - 36.5mm x 26mm x 38.5mm
Cosmo Rogue - C - 27mm x 34mm x 43mm
Cosmo Rogue - D - 35mm x 29.5mm x 39mm
Base Info: Deck - 35mm - RoundComes in 32mm scaleBundle includes all 4 models
Like this model? Click here to check out the rest of our collection from Cast n Play
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Cast n Play
@CastnPlay
If you would like to follow or support this artist, please check out the links below.
patreon.com/CastnPlay
instagram.com/CastnPlay
myminifactory.com/users/CastnPlay
facebook.com/CastnPlayMinis
youtube.com/castnplay

Death Hornet Bundle
from $7.99
Base Size: 35mm
Base Style: Nebula - Ugnix Base
Bundle includes both models
Like this model? Click here to check out the rest of our collection from Cast n Play
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Cast n Play
@CastnPlay
If you would like to follow or support this artist, please check out the links below.
patreon.com/CastnPlay
instagram.com/CastnPlay
myminifactory.com/users/CastnPlay
facebook.com/CastnPlayMinis
youtube.com/castnplay

Deck Bases
from $2.74
Like this model? Click here to check out the rest of our collection from Cast n Play
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Cast n Play
@CastnPlay
If you would like to follow or support this artist, please check out the links below.
patreon.com/CastnPlay
instagram.com/CastnPlay
myminifactory.com/users/CastnPlay
facebook.com/CastnPlayMinis
youtube.com/castnplay

Deck Sentinels Bundle
from $10.24
Approximate size:
Deck Sentinel - A - 32mm x 24mm x 47.5mm
Deck Sentinel - B - 36mm x 24mm x 45mm
Deck Sentinel - C - 32mm x 23.5mm x 47.5mm
Deck Sentinel - D - 36mm x 24.5mm x 40.5mm
Base Info:
Deck Sentinel - A - 35mm - Deck - Round
Deck Sentinel - B - 35mm - Deck - Round
Deck Sentinel - C - 35mm - Deck - Round
Deck Sentinel - D - 35mm - Deck - Round
Comes in 32mm scaleBundle includes all 4 models
Like this model? Click here to check out the rest of our collection from Cast n Play
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Cast n Play
@CastnPlay
If you would like to follow or support this artist, please check out the links below.
patreon.com/CastnPlay
instagram.com/CastnPlay
myminifactory.com/users/CastnPlay
facebook.com/CastnPlayMinis
youtube.com/castnplay

Jungle Scavengers Bundle
from $8.49
Approximate size:
Jungle Scavenger - A - 35.5mm x 26.5mm x 38.5mm
Jungle Scavenger - B - 33mm x 28.5mm x 37.5mm
Jungle Scavenger - C - 27mm x 33.5mm x 41.5mm
Jungle Scavenger - D - 33.5mm x 26mm x 36.5mm
Base Info: Deck - 35mm - RoundComes in 32mm scaleBundle includes all 4 models
Like this model? Click here to check out the rest of our collection from Cast n Play
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Cast n Play
@CastnPlay
If you would like to follow or support this artist, please check out the links below.
patreon.com/CastnPlay
instagram.com/CastnPlay
myminifactory.com/users/CastnPlay
facebook.com/CastnPlayMinis
youtube.com/castnplay

Legion Infantry Bundle
from $7.99
Base Size: 35mm
Base Style: Nebula - Legion Base
Bundle includes all 3 models
Modular Model:
The following options are available for this model's hands/weapons. Please select your preferred hand/weapon combination. If you do not make a selection then the weapon combo pictured in the render will be selected.
Right Hand:
2H Rifle (uses both hands)
Sword
Pistol
Banner
Brief Case
Left Hand:
2H Rifle (uses both hands)
Sword
Pistol
Finger Pointing
Like this model? Click here to check out the rest of our collection from Cast n Play
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Cast n Play
@CastnPlay
If you would like to follow or support this artist, please check out the links below.
patreon.com/CastnPlay
instagram.com/CastnPlay
myminifactory.com/users/CastnPlay
facebook.com/CastnPlayMinis
youtube.com/castnplay

Mertle the Solar Berserker
from $17.74
Approximate size: 61.5mm x 46mm x 75mm
Comes in 32mm scale
Like this model? Click here to check out the rest of our collection from Cast n Play
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Cast n Play
@CastnPlay
If you would like to follow or support this artist, please check out the links below.
patreon.com/CastnPlay
instagram.com/CastnPlay
myminifactory.com/users/CastnPlay
facebook.com/CastnPlayMinis
youtube.com/castnplay

Moon Travelers Bundle
from $11.99
Approximate size:
Moon Traveler - A - 35.5mm x 34.5mm x 39mm
Moon Traveler - B - 39mm x 37mm x 43.5mm
Moon Traveler - C - 36mm x 35mm x 43.5mm
Moon Traveler - D - 36mm x 33.5mm x 40.5mm
Base Info: Deck - 35mm - RoundComes in 32mm scaleBundle includes all 4 models
Like this model? Click here to check out the rest of our collection from Cast n Play
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Cast n Play
@CastnPlay
If you would like to follow or support this artist, please check out the links below.
patreon.com/CastnPlay
instagram.com/CastnPlay
myminifactory.com/users/CastnPlay
facebook.com/CastnPlayMinis
youtube.com/castnplay

Nebula Bases
from $1.50
Like this model? Click here to check out the rest of our collection from Cast n Play
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Cast n Play
@CastnPlay
If you would like to follow or support this artist, please check out the links below.
patreon.com/CastnPlay
instagram.com/CastnPlay
myminifactory.com/users/CastnPlay
facebook.com/CastnPlayMinis
youtube.com/castnplay

Nebula Toolkit - Dice Tower, Token Vault, Smoke Marker
from $12.49
Size:
Small Breeding Cluster: 79.5mm x 119mm x 80.5mm
Birth Hull: 65mm x 58mm x 58mm
Crawlers Pool: 62.5mm x 97mm x 69mm
Incubation Pod: 80mm x 70.5mm x 80mm
Mother's Hull: 51mm x 55mm x 43.5mm
Organic Beacon: 90mm x 84mm x 63mm
Reduced Egg Cluster: 69mm x 93mm x 54mm
Birthing Platform: 152.5mm x 111.5mm x 94.5mm
Breeding Cluster: 123mm x 91.5mm x 85mm
Corrupted Bunker: 225mm x 201mm x 113mm
Destroyed Presbyter: 124.5mm x 155.5mm x 107mm
Keeper Formation: 171mm x 124mm x 92mm
Spore Generator: 173mm x 114mm x 73mm
Slime Bank: 120mm x 96.5mm x 30mm
Crane: 67.5mm x 76mm x 74.5mm
Loadout: 72mm x 57mm x 42.5mm
Wall: 145mm x 42.5mm x 67mm
Rock Bridge: 234.5mm x 232mm x 85.5mm
Large Rock Formation: 158.5mm x 148mm x 101.5mm
Large Platform: 189mm x 145mm x 89mm
Small Platform: 87.5mm x 98mm x 43mm
Medium Platform A: 156.5mm x 133.5mm x 84mm
Medium Platform B: 118.5mm x 136mm x 77mm
Like this model? Click here to check out the rest of our collection from Cast n Play
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Cast n Play
@CastnPlay
If you would like to follow or support this artist, please check out the links below.
patreon.com/CastnPlay
instagram.com/CastnPlay
myminifactory.com/users/CastnPlay
facebook.com/CastnPlayMinis
youtube.com/castnplay

Oblivion Spellcasters Bundle
from $11.99
Approximate size:
Oblivion Spellcaster - A - 39.5mm x 28.5mm x 42mm
Oblivion Spellcaster - B - 40.5mm x 28mm x 38mm
Oblivion Spellcaster - C - 37mm x 28.5mm x 45.5mm
Oblivion Spellcaster - D - 40.5mm x 28mm x 42.5mm
Base Info: Deck - 35mm - RoundComes in 32mm scaleBundle includes all 4 models
Like this model? Click here to check out the rest of our collection from Cast n Play
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Cast n Play
@CastnPlay
If you would like to follow or support this artist, please check out the links below.
patreon.com/CastnPlay
instagram.com/CastnPlay
myminifactory.com/users/CastnPlay
facebook.com/CastnPlayMinis
youtube.com/castnplay

Orbital Navigators Bundle
from $10.99
Approximate size:
Orbital Navigator - A - 36.5mm x 34mm x 45mm
Orbital Navigator - B - 38.5mm x 29mm x 47.5mm
Orbital Navigator - C - 34.5mm x 24mm x 43mm
Orbital Navigator - D - 34mm x 26.5mm x 40.5mm
Base Info: Deck - 35mm - RoundComes in 32mm scaleBundle includes all 4 models
Like this model? Click here to check out the rest of our collection from Cast n Play
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Cast n Play
@CastnPlay
If you would like to follow or support this artist, please check out the links below.
patreon.com/CastnPlay
instagram.com/CastnPlay
myminifactory.com/users/CastnPlay
facebook.com/CastnPlayMinis
youtube.com/castnplay

Ossus Terrain
from $2.99
Size:
Beacon Ruins: 102mm x 110mm x 57.5mm
Earth Scatter Comms: 20.5mm x 24.5mm x 13mm
Earth Scatter Satellite: 39mm x 54mm x 44mm
Earth Scatter Shield: 36.5mm x 38.5mm x 31.5mm
Buried Wing: 83mm x 76mm x 65mm
Comms Ruins: 83mm x 92mm x 46mm
Crashed Cargo: 106mm x 116.5mm x 61mm
Small Monolith: 123mm x 108.5mm x 50mm
Sunken Monolith: 80mm x 91mm x 47.5mm
Sunken Sphere: 77.5mm x 68mm x 59.5mm
Crashed Components: 102mm x 93mm x 56mm
Broken Wall: 157.5mm x 121mm x 73.5mm
Sentinel Ring: 108.5mm x 110.5mm x 68mm
Component Ruins: 117.5mm x 130mm x 98mm
Crashed Module: 103.5mm x 88mm x 64mm
Ruins Crushed Vehicle: 115.5mm x 105mm x 70mm
Ruins W/ Destroyed ExoBike: 124mm x 101.5mm x 58.5mm
Bridge: 213.5mm x 233mm x 89.5mm
Sentinel Tower: 89mm x 120mm x 86mm
Ruined Bridge: 210mm x 90.5mm x 84.5mm
Ruined Teleporter: 158.5mm x 139.5mm x 80mm
Ruins Monolith: 144.5mm x 136mm x 120mm
Like this model? Click here to check out the rest of our collection from Cast n Play
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Cast n Play
@CastnPlay
If you would like to follow or support this artist, please check out the links below.
patreon.com/CastnPlay
instagram.com/CastnPlay
myminifactory.com/users/CastnPlay
facebook.com/CastnPlayMinis
youtube.com/castnplay

Res'Ai Corrupters
from $8.99
Base Size: 50mm
Base Style: Nebula - Res'ai Base
Bundle includes all 3 models
Like this model? Click here to check out the rest of our collection from Cast n Play
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Cast n Play
@CastnPlay
If you would like to follow or support this artist, please check out the links below.
patreon.com/CastnPlay
instagram.com/CastnPlay
myminifactory.com/users/CastnPlay
facebook.com/CastnPlayMinis
youtube.com/castnplay

Res'Ai Crawlers
from $9.49
Base Size: 35mm
Base Style: Nebula - Res'ai Base
Bundle includes all 3 models
Like this model? Click here to check out the rest of our collection from Cast n Play
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Cast n Play
@CastnPlay
If you would like to follow or support this artist, please check out the links below.
patreon.com/CastnPlay
instagram.com/CastnPlay
myminifactory.com/users/CastnPlay
facebook.com/CastnPlayMinis
youtube.com/castnplay

Res'Ai World Terrain
from $12.49
Size:
Small Breeding Cluster: 79.5mm x 119mm x 80.5mm
Birth Hull: 65mm x 58mm x 58mm
Crawlers Pool: 62.5mm x 97mm x 69mm
Incubation Pod: 80mm x 70.5mm x 80mm
Mother's Hull: 51mm x 55mm x 43.5mm
Organic Beacon: 90mm x 84mm x 63mm
Reduced Egg Cluster: 69mm x 93mm x 54mm
Birthing Platform: 152.5mm x 111.5mm x 94.5mm
Breeding Cluster: 123mm x 91.5mm x 85mm
Corrupted Bunker: 225mm x 201mm x 113mm
Destroyed Presbyter: 124.5mm x 155.5mm x 107mm
Keeper Formation: 171mm x 124mm x 92mm
Spore Generator: 173mm x 114mm x 73mm
Slime Bank: 120mm x 96.5mm x 30mm
Crane: 67.5mm x 76mm x 74.5mm
Loadout: 72mm x 57mm x 42.5mm
Wall: 145mm x 42.5mm x 67mm
Rock Bridge: 234.5mm x 232mm x 85.5mm
Large Rock Formation: 158.5mm x 148mm x 101.5mm
Large Platform: 189mm x 145mm x 89mm
Small Platform: 87.5mm x 98mm x 43mm
Medium Platform A: 156.5mm x 133.5mm x 84mm
Medium Platform B: 118.5mm x 136mm x 77mm
Like this model? Click here to check out the rest of our collection from Cast n Play
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Cast n Play
@CastnPlay
If you would like to follow or support this artist, please check out the links below.
patreon.com/CastnPlay
instagram.com/CastnPlay
myminifactory.com/users/CastnPlay
facebook.com/CastnPlayMinis
youtube.com/castnplay

Res'aigons Bundle
from $9.99
Base Size: 50mm
Base Style: Nebula - Res'ai Base
Bundle includes both models
Like this model? Click here to check out the rest of our collection from Cast n Play
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Cast n Play
@CastnPlay
If you would like to follow or support this artist, please check out the links below.
patreon.com/CastnPlay
instagram.com/CastnPlay
myminifactory.com/users/CastnPlay
facebook.com/CastnPlayMinis
youtube.com/castnplay

Res'ailing Bundle
from $7.49
Base Size: 25mm
Base Style: Nebula - Res'ai Base
Bundle includes both models
Like this model? Click here to check out the rest of our collection from Cast n Play
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Cast n Play
@CastnPlay
If you would like to follow or support this artist, please check out the links below.
patreon.com/CastnPlay
instagram.com/CastnPlay
myminifactory.com/users/CastnPlay
facebook.com/CastnPlayMinis
youtube.com/castnplay

Revenant Monks Bundle
from $10.49
Approximate size:
Revenant Monk - A - 27mm x 33.5mm x 43.5mm
Revenant Monk - B - 31mm x 27mm x 41.5mm
Revenant Monk - C - 36mm x 27mm x 38.5mm
Revenant Monk - D - 43mm x 25.5mm x 38mm
Base Info: Deck - 35mm - RoundComes in 32mm scaleBundle includes all 4 models
Like this model? Click here to check out the rest of our collection from Cast n Play
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Cast n Play
@CastnPlay
If you would like to follow or support this artist, please check out the links below.
patreon.com/CastnPlay
instagram.com/CastnPlay
myminifactory.com/users/CastnPlay
facebook.com/CastnPlayMinis
youtube.com/castnplay

Riot Forces Bundle
from $9.99
Approximate size:
Riot Force - A - 37mm x 26mm x 47mm
Riot Force - B - 33.5mm x 25mm x 49mm
Riot Force - C - 39.5mm x 23.5mm x 40.5mm
Riot Force - D - 32mm x 24.5mm x 46.5mm
Base Info: Deck - 35mm - RoundComes in 32mm scaleBundle includes all 4 models
Like this model? Click here to check out the rest of our collection from Cast n Play
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Cast n Play
@CastnPlay
If you would like to follow or support this artist, please check out the links below.
patreon.com/CastnPlay
instagram.com/CastnPlay
myminifactory.com/users/CastnPlay
facebook.com/CastnPlayMinis
youtube.com/castnplay

Siege Demolishers Bundle
from $10.99
Approximate size:
Siege Demolisher - A - 33.5mm x 33.5mm x 52mm
Siege Demolisher - B - 32mm x 32.5mm x 51mm
Siege Demolisher - C - 33mm x 34.5mm x 44mm
Siege Demolisher - D - 41mm x 36mm x 43mm
Base Info: Deck - 35mm - RoundComes in 32mm scaleBundle includes all 4 models
Like this model? Click here to check out the rest of our collection from Cast n Play
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Cast n Play
@CastnPlay
If you would like to follow or support this artist, please check out the links below.
patreon.com/CastnPlay
instagram.com/CastnPlay
myminifactory.com/users/CastnPlay
facebook.com/CastnPlayMinis
youtube.com/castnplay