![Aaron](http://resinclad.com/cdn/shop/products/AaronFront_375x.jpg?v=1660071228 375w,//resinclad.com/cdn/shop/products/AaronFront_410x.jpg?v=1660071228 410w,//resinclad.com/cdn/shop/products/AaronFront_520x.jpg?v=1660071228 520w,//resinclad.com/cdn/shop/products/AaronFront_576x.jpg?v=1660071228 576w,//resinclad.com/cdn/shop/products/AaronFront_768x.jpg?v=1660071228 768w,//resinclad.com/cdn/shop/products/AaronFront_992x.jpg?v=1660071228 992w,//resinclad.com/cdn/shop/products/AaronFront_1024x.jpg?v=1660071228 1024w,//resinclad.com/cdn/shop/products/AaronFront_1280x.jpg?v=1660071228 1280w)
![Aaron](http://resinclad.com/cdn/shop/products/AaronBack_375x.jpg?v=1660071230 375w,//resinclad.com/cdn/shop/products/AaronBack_410x.jpg?v=1660071230 410w,//resinclad.com/cdn/shop/products/AaronBack_520x.jpg?v=1660071230 520w,//resinclad.com/cdn/shop/products/AaronBack_576x.jpg?v=1660071230 576w,//resinclad.com/cdn/shop/products/AaronBack_768x.jpg?v=1660071230 768w,//resinclad.com/cdn/shop/products/AaronBack_992x.jpg?v=1660071230 992w,//resinclad.com/cdn/shop/products/AaronBack_1024x.jpg?v=1660071230 1024w,//resinclad.com/cdn/shop/products/AaronBack_1280x.jpg?v=1660071230 1280w)
Aaron
from $6.99
Base Size: 25mm
Base Style: City Streets
Like this model? Click here to check out the rest of our collection from Galaad Miniatures
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Galaad Miniatures
@GalaadMiniatures
If you would like to follow or support this artist, please check out the links below.
patreon.com/galaad
facebook.com/galaadminiatures
instagram.com/galaad_miniatures
myminifactory.com/users/galaad
![Adventurer Bundle](http://resinclad.com/cdn/shop/products/Adventuerer_sBundle_375x.png?v=1632508651 375w,//resinclad.com/cdn/shop/products/Adventuerer_sBundle_410x.png?v=1632508651 410w,//resinclad.com/cdn/shop/products/Adventuerer_sBundle_520x.png?v=1632508651 520w,//resinclad.com/cdn/shop/products/Adventuerer_sBundle_576x.png?v=1632508651 576w,//resinclad.com/cdn/shop/products/Adventuerer_sBundle_768x.png?v=1632508651 768w,//resinclad.com/cdn/shop/products/Adventuerer_sBundle_992x.png?v=1632508651 992w,//resinclad.com/cdn/shop/products/Adventuerer_sBundle_1024x.png?v=1632508651 1024w,//resinclad.com/cdn/shop/products/Adventuerer_sBundle_1280x.png?v=1632508651 1280w)
![Adventurer Bundle](http://resinclad.com/cdn/shop/products/Goblin_Rogue_afaffd9b-f6c6-4e37-803a-cbd0e44c206e_375x.png?v=1632508651 375w,//resinclad.com/cdn/shop/products/Goblin_Rogue_afaffd9b-f6c6-4e37-803a-cbd0e44c206e_410x.png?v=1632508651 410w,//resinclad.com/cdn/shop/products/Goblin_Rogue_afaffd9b-f6c6-4e37-803a-cbd0e44c206e_520x.png?v=1632508651 520w,//resinclad.com/cdn/shop/products/Goblin_Rogue_afaffd9b-f6c6-4e37-803a-cbd0e44c206e_576x.png?v=1632508651 576w,//resinclad.com/cdn/shop/products/Goblin_Rogue_afaffd9b-f6c6-4e37-803a-cbd0e44c206e_768x.png?v=1632508651 768w,//resinclad.com/cdn/shop/products/Goblin_Rogue_afaffd9b-f6c6-4e37-803a-cbd0e44c206e_992x.png?v=1632508651 992w,//resinclad.com/cdn/shop/products/Goblin_Rogue_afaffd9b-f6c6-4e37-803a-cbd0e44c206e_1024x.png?v=1632508651 1024w,//resinclad.com/cdn/shop/products/Goblin_Rogue_afaffd9b-f6c6-4e37-803a-cbd0e44c206e_1280x.png?v=1632508651 1280w)
Adventurer Bundle
from $6.99
Model Size:
Goblin Rogue - 34.25mm x 22mm x 27mm
Owlfolk Knight - 40.48mm x 27.81mm x 32mm
Time Mage - 25.42mm x 19.78mm x 42.17mm
Warlock - 29.75mm x 15.25mm x 34mm
Base Size: 25mm
Base Style: Plain
Like this model? Click here to check out the rest of our collection from Manuel Boria
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Manuel Boria
@ManuelBoria
If you would like to follow or support this artist, please check out the links below.
patreon.com/ManuelBoria
myminifactory.com/users/Manuel_Boria
![Amon the Tiefling Warlock](http://resinclad.com/cdn/shop/products/LabeledWoWAmonwBase_375x.png?v=1673384193 375w,//resinclad.com/cdn/shop/products/LabeledWoWAmonwBase_410x.png?v=1673384193 410w,//resinclad.com/cdn/shop/products/LabeledWoWAmonwBase_520x.png?v=1673384193 520w,//resinclad.com/cdn/shop/products/LabeledWoWAmonwBase_576x.png?v=1673384193 576w,//resinclad.com/cdn/shop/products/LabeledWoWAmonwBase_768x.png?v=1673384193 768w,//resinclad.com/cdn/shop/products/LabeledWoWAmonwBase_992x.png?v=1673384193 992w,//resinclad.com/cdn/shop/products/LabeledWoWAmonwBase_1024x.png?v=1673384193 1024w,//resinclad.com/cdn/shop/products/LabeledWoWAmonwBase_1280x.png?v=1673384193 1280w)
![Amon the Tiefling Warlock](http://resinclad.com/cdn/shop/products/WoWAmonP1-FrontwBase_375x.png?v=1673384205 375w,//resinclad.com/cdn/shop/products/WoWAmonP1-FrontwBase_410x.png?v=1673384205 410w,//resinclad.com/cdn/shop/products/WoWAmonP1-FrontwBase_520x.png?v=1673384205 520w,//resinclad.com/cdn/shop/products/WoWAmonP1-FrontwBase_576x.png?v=1673384205 576w,//resinclad.com/cdn/shop/products/WoWAmonP1-FrontwBase_768x.png?v=1673384205 768w,//resinclad.com/cdn/shop/products/WoWAmonP1-FrontwBase_992x.png?v=1673384205 992w,//resinclad.com/cdn/shop/products/WoWAmonP1-FrontwBase_1024x.png?v=1673384205 1024w,//resinclad.com/cdn/shop/products/WoWAmonP1-FrontwBase_1280x.png?v=1673384205 1280w)
Amon the Tiefling Warlock
from $5.49
32mm Scale
Base Size: 25mm
Base Style:
Pose 1 - Assorted Bases - Wood
Pose 2 - Assorted Bases - Terracotta A
Bundle includes both models
Like this model? Click here to check out the rest of our collection from
Black Skull Studio
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Black Skull Studio
@BlackSkullStudio
If you would like to follow or support this artist, please check out the link below.
instagram.com/blackskull.studio
twitter.com/BlackSkullMX
![Carthos the Tiefling Rogue](http://resinclad.com/cdn/shop/products/Tiefling-CarthosD_375x.png?v=1678733530 375w,//resinclad.com/cdn/shop/products/Tiefling-CarthosD_410x.png?v=1678733530 410w,//resinclad.com/cdn/shop/products/Tiefling-CarthosD_520x.png?v=1678733530 520w,//resinclad.com/cdn/shop/products/Tiefling-CarthosD_576x.png?v=1678733530 576w,//resinclad.com/cdn/shop/products/Tiefling-CarthosD_768x.png?v=1678733530 768w,//resinclad.com/cdn/shop/products/Tiefling-CarthosD_992x.png?v=1678733530 992w,//resinclad.com/cdn/shop/products/Tiefling-CarthosD_1024x.png?v=1678733530 1024w,//resinclad.com/cdn/shop/products/Tiefling-CarthosD_1280x.png?v=1678733530 1280w)
![Carthos the Tiefling Rogue](http://resinclad.com/cdn/shop/products/WoWCarthosP1-FrontwBase_375x.png?v=1678733530 375w,//resinclad.com/cdn/shop/products/WoWCarthosP1-FrontwBase_410x.png?v=1678733530 410w,//resinclad.com/cdn/shop/products/WoWCarthosP1-FrontwBase_520x.png?v=1678733530 520w,//resinclad.com/cdn/shop/products/WoWCarthosP1-FrontwBase_576x.png?v=1678733530 576w,//resinclad.com/cdn/shop/products/WoWCarthosP1-FrontwBase_768x.png?v=1678733530 768w,//resinclad.com/cdn/shop/products/WoWCarthosP1-FrontwBase_992x.png?v=1678733530 992w,//resinclad.com/cdn/shop/products/WoWCarthosP1-FrontwBase_1024x.png?v=1678733530 1024w,//resinclad.com/cdn/shop/products/WoWCarthosP1-FrontwBase_1280x.png?v=1678733530 1280w)
Carthos the Tiefling Rogue
from $6.49
32mm Scale
Base Size: 25mm
Base Style:
Pose 1 - Assorted Bases - Terracotta B
Pose 2 - Assorted Bases - Ground
Bundle includes both models
Like this model? Click here to check out the rest of our collection from
Black Skull Studio
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Black Skull Studio
@BlackSkullStudio
If you would like to follow or support this artist, please check out the link below.
instagram.com/blackskull.studio
twitter.com/BlackSkullMX
![Give Me The Eggs - Diorama](http://resinclad.com/cdn/shop/products/Diorama_Givemetheeggs_2_375x.jpg?v=1630695991 375w,//resinclad.com/cdn/shop/products/Diorama_Givemetheeggs_2_410x.jpg?v=1630695991 410w,//resinclad.com/cdn/shop/products/Diorama_Givemetheeggs_2_520x.jpg?v=1630695991 520w,//resinclad.com/cdn/shop/products/Diorama_Givemetheeggs_2_576x.jpg?v=1630695991 576w,//resinclad.com/cdn/shop/products/Diorama_Givemetheeggs_2_768x.jpg?v=1630695991 768w,//resinclad.com/cdn/shop/products/Diorama_Givemetheeggs_2_992x.jpg?v=1630695991 992w,//resinclad.com/cdn/shop/products/Diorama_Givemetheeggs_2_1024x.jpg?v=1630695991 1024w,//resinclad.com/cdn/shop/products/Diorama_Givemetheeggs_2_1280x.jpg?v=1630695991 1280w)
![Give Me The Eggs - Diorama](http://resinclad.com/cdn/shop/products/Diorama_Givemetheeggs_size_375x.jpg?v=1630695991 375w,//resinclad.com/cdn/shop/products/Diorama_Givemetheeggs_size_410x.jpg?v=1630695991 410w,//resinclad.com/cdn/shop/products/Diorama_Givemetheeggs_size_520x.jpg?v=1630695991 520w,//resinclad.com/cdn/shop/products/Diorama_Givemetheeggs_size_576x.jpg?v=1630695991 576w,//resinclad.com/cdn/shop/products/Diorama_Givemetheeggs_size_768x.jpg?v=1630695991 768w,//resinclad.com/cdn/shop/products/Diorama_Givemetheeggs_size_992x.jpg?v=1630695991 992w,//resinclad.com/cdn/shop/products/Diorama_Givemetheeggs_size_1024x.jpg?v=1630695991 1024w,//resinclad.com/cdn/shop/products/Diorama_Givemetheeggs_size_1280x.jpg?v=1630695991 1280w)
Give Me The Eggs - Diorama
$15.99
Size: 79.20mm x 18.17mm x 64.4mm
Like this model? Click here to check out the rest of our collection from White Werewolf Tavern
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
White Werewolf Tavern
@WWTavern
If you would like to follow or support this artist, please check out the links below.
patreon.com/whitewerewolftavern
www.instagram.com/wwtavern
myminifactory.com/users/WWTavern
facebook.com/miniatures3d
twitter.com/tavernww
![Goblin Thief](http://resinclad.com/cdn/shop/products/GoblinThief_375x.png?v=1662062005 375w,//resinclad.com/cdn/shop/products/GoblinThief_410x.png?v=1662062005 410w,//resinclad.com/cdn/shop/products/GoblinThief_520x.png?v=1662062005 520w,//resinclad.com/cdn/shop/products/GoblinThief_576x.png?v=1662062005 576w,//resinclad.com/cdn/shop/products/GoblinThief_768x.png?v=1662062005 768w,//resinclad.com/cdn/shop/products/GoblinThief_992x.png?v=1662062005 992w,//resinclad.com/cdn/shop/products/GoblinThief_1024x.png?v=1662062005 1024w,//resinclad.com/cdn/shop/products/GoblinThief_1280x.png?v=1662062005 1280w)
![Goblin Thief](http://resinclad.com/cdn/shop/products/Goblin_thief_32_parts_375x.jpg?v=1662062005 375w,//resinclad.com/cdn/shop/products/Goblin_thief_32_parts_410x.jpg?v=1662062005 410w,//resinclad.com/cdn/shop/products/Goblin_thief_32_parts_520x.jpg?v=1662062005 520w,//resinclad.com/cdn/shop/products/Goblin_thief_32_parts_576x.jpg?v=1662062005 576w,//resinclad.com/cdn/shop/products/Goblin_thief_32_parts_768x.jpg?v=1662062005 768w,//resinclad.com/cdn/shop/products/Goblin_thief_32_parts_992x.jpg?v=1662062005 992w,//resinclad.com/cdn/shop/products/Goblin_thief_32_parts_1024x.jpg?v=1662062005 1024w,//resinclad.com/cdn/shop/products/Goblin_thief_32_parts_1280x.jpg?v=1662062005 1280w)
Goblin Thief
from $6.99
Comes in 32mm or 75mm scale
Base Style: Specialized
Like this model? Click here to check out the rest of our collection from White Werewolf Tavern
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
White Werewolf Tavern
@WWTavern
If you would like to follow or support this artist, please check out the links below.
patreon.com/whitewerewolftavern
www.instagram.com/wwtavern
myminifactory.com/users/WWTavern
facebook.com/miniatures3d
twitter.com/tavernww
![Goblin Thief Bust](http://resinclad.com/cdn/shop/products/GoblinThiefbust_375x.png?v=1662135821 375w,//resinclad.com/cdn/shop/products/GoblinThiefbust_410x.png?v=1662135821 410w,//resinclad.com/cdn/shop/products/GoblinThiefbust_520x.png?v=1662135821 520w,//resinclad.com/cdn/shop/products/GoblinThiefbust_576x.png?v=1662135821 576w,//resinclad.com/cdn/shop/products/GoblinThiefbust_768x.png?v=1662135821 768w,//resinclad.com/cdn/shop/products/GoblinThiefbust_992x.png?v=1662135821 992w,//resinclad.com/cdn/shop/products/GoblinThiefbust_1024x.png?v=1662135821 1024w,//resinclad.com/cdn/shop/products/GoblinThiefbust_1280x.png?v=1662135821 1280w)
![Goblin Thief Bust](http://resinclad.com/cdn/shop/products/Goblin_thief_bust_parts_375x.jpg?v=1662135821 375w,//resinclad.com/cdn/shop/products/Goblin_thief_bust_parts_410x.jpg?v=1662135821 410w,//resinclad.com/cdn/shop/products/Goblin_thief_bust_parts_520x.jpg?v=1662135821 520w,//resinclad.com/cdn/shop/products/Goblin_thief_bust_parts_576x.jpg?v=1662135821 576w,//resinclad.com/cdn/shop/products/Goblin_thief_bust_parts_768x.jpg?v=1662135821 768w,//resinclad.com/cdn/shop/products/Goblin_thief_bust_parts_992x.jpg?v=1662135821 992w,//resinclad.com/cdn/shop/products/Goblin_thief_bust_parts_1024x.jpg?v=1662135821 1024w,//resinclad.com/cdn/shop/products/Goblin_thief_bust_parts_1280x.jpg?v=1662135821 1280w)
Goblin Thief Bust
$28.99
Model is approximately 89mm tall excluding the stand.
Like this model? Click here to check out the rest of our collection from White Werewolf Tavern
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
White Werewolf Tavern
@WWTavern
If you would like to follow or support this artist, please check out the links below.
patreon.com/whitewerewolftavern
www.instagram.com/wwtavern
myminifactory.com/users/WWTavern
facebook.com/miniatures3d
twitter.com/tavernww
![Goblinoid Bundle](http://resinclad.com/cdn/shop/products/GoblinoidBundle_375x.png?v=1661373504 375w,//resinclad.com/cdn/shop/products/GoblinoidBundle_410x.png?v=1661373504 410w,//resinclad.com/cdn/shop/products/GoblinoidBundle_520x.png?v=1661373504 520w,//resinclad.com/cdn/shop/products/GoblinoidBundle_576x.png?v=1661373504 576w,//resinclad.com/cdn/shop/products/GoblinoidBundle_768x.png?v=1661373504 768w,//resinclad.com/cdn/shop/products/GoblinoidBundle_992x.png?v=1661373504 992w,//resinclad.com/cdn/shop/products/GoblinoidBundle_1024x.png?v=1661373504 1024w,//resinclad.com/cdn/shop/products/GoblinoidBundle_1280x.png?v=1661373504 1280w)
![Goblinoid Bundle](http://resinclad.com/cdn/shop/products/Goblin_Cook_375x.png?v=1661373578 375w,//resinclad.com/cdn/shop/products/Goblin_Cook_410x.png?v=1661373578 410w,//resinclad.com/cdn/shop/products/Goblin_Cook_520x.png?v=1661373578 520w,//resinclad.com/cdn/shop/products/Goblin_Cook_576x.png?v=1661373578 576w,//resinclad.com/cdn/shop/products/Goblin_Cook_768x.png?v=1661373578 768w,//resinclad.com/cdn/shop/products/Goblin_Cook_992x.png?v=1661373578 992w,//resinclad.com/cdn/shop/products/Goblin_Cook_1024x.png?v=1661373578 1024w,//resinclad.com/cdn/shop/products/Goblin_Cook_1280x.png?v=1661373578 1280w)
Goblinoid Bundle
from $6.99
Model Size:
Goblin Cook - 22.5mm x 37mm x 25mm
Goblin Sorceress - 36.5mm x 27mm x 19.5mm
Goblin Rogue - 34mm x 27mm x 22mm
Hobgoblin Ranger - 39.5mm x 34mm x 33.5mm
Hobgoblin Warrior - 35.5mm x 33mm x 19mm
Bugbear - 52.5mm x 59mm x 49.5mm
Base Size: 25mm
Base Style: Plain
Bundle includes all 6 models
Like this model? Click here to check out the rest of our collection from Manuel Boria
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Manuel Boria
@ManuelBoria
If you would like to follow or support this artist, please check out the links below.
patreon.com/ManuelBoria
myminifactory.com/users/Manuel_Boria
![Grigor the Human Bard](http://resinclad.com/cdn/shop/products/Human-GrigorD_375x.png?v=1678734822 375w,//resinclad.com/cdn/shop/products/Human-GrigorD_410x.png?v=1678734822 410w,//resinclad.com/cdn/shop/products/Human-GrigorD_520x.png?v=1678734822 520w,//resinclad.com/cdn/shop/products/Human-GrigorD_576x.png?v=1678734822 576w,//resinclad.com/cdn/shop/products/Human-GrigorD_768x.png?v=1678734822 768w,//resinclad.com/cdn/shop/products/Human-GrigorD_992x.png?v=1678734822 992w,//resinclad.com/cdn/shop/products/Human-GrigorD_1024x.png?v=1678734822 1024w,//resinclad.com/cdn/shop/products/Human-GrigorD_1280x.png?v=1678734822 1280w)
![Grigor the Human Bard](http://resinclad.com/cdn/shop/products/WoWGrigorP1-FrontwBase_375x.png?v=1678734828 375w,//resinclad.com/cdn/shop/products/WoWGrigorP1-FrontwBase_410x.png?v=1678734828 410w,//resinclad.com/cdn/shop/products/WoWGrigorP1-FrontwBase_520x.png?v=1678734828 520w,//resinclad.com/cdn/shop/products/WoWGrigorP1-FrontwBase_576x.png?v=1678734828 576w,//resinclad.com/cdn/shop/products/WoWGrigorP1-FrontwBase_768x.png?v=1678734828 768w,//resinclad.com/cdn/shop/products/WoWGrigorP1-FrontwBase_992x.png?v=1678734828 992w,//resinclad.com/cdn/shop/products/WoWGrigorP1-FrontwBase_1024x.png?v=1678734828 1024w,//resinclad.com/cdn/shop/products/WoWGrigorP1-FrontwBase_1280x.png?v=1678734828 1280w)
Grigor the Human Bard
from $5.99
32mm Scale
Base Size: 25mm
Base Style:
Pose 1 - Assorted Bases - Wood
Pose 2 - Assorted Bases - Terracotta A
Bundle includes both models
Like this model? Click here to check out the rest of our collection from
Black Skull Studio
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Black Skull Studio
@BlackSkullStudio
If you would like to follow or support this artist, please check out the link below.
instagram.com/blackskull.studio
twitter.com/BlackSkullMX
![Ivor the Human Gladiator](http://resinclad.com/cdn/shop/products/labeledWow-Ivor_375x.png?v=1678735949 375w,//resinclad.com/cdn/shop/products/labeledWow-Ivor_410x.png?v=1678735949 410w,//resinclad.com/cdn/shop/products/labeledWow-Ivor_520x.png?v=1678735949 520w,//resinclad.com/cdn/shop/products/labeledWow-Ivor_576x.png?v=1678735949 576w,//resinclad.com/cdn/shop/products/labeledWow-Ivor_768x.png?v=1678735949 768w,//resinclad.com/cdn/shop/products/labeledWow-Ivor_992x.png?v=1678735949 992w,//resinclad.com/cdn/shop/products/labeledWow-Ivor_1024x.png?v=1678735949 1024w,//resinclad.com/cdn/shop/products/labeledWow-Ivor_1280x.png?v=1678735949 1280w)
![Ivor the Human Gladiator](http://resinclad.com/cdn/shop/products/Wow-Ivor_FistFront_375x.png?v=1678735949 375w,//resinclad.com/cdn/shop/products/Wow-Ivor_FistFront_410x.png?v=1678735949 410w,//resinclad.com/cdn/shop/products/Wow-Ivor_FistFront_520x.png?v=1678735949 520w,//resinclad.com/cdn/shop/products/Wow-Ivor_FistFront_576x.png?v=1678735949 576w,//resinclad.com/cdn/shop/products/Wow-Ivor_FistFront_768x.png?v=1678735949 768w,//resinclad.com/cdn/shop/products/Wow-Ivor_FistFront_992x.png?v=1678735949 992w,//resinclad.com/cdn/shop/products/Wow-Ivor_FistFront_1024x.png?v=1678735949 1024w,//resinclad.com/cdn/shop/products/Wow-Ivor_FistFront_1280x.png?v=1678735949 1280w)
Ivor the Human Gladiator
from $6.99
32mm Scale
Base Size: 32mm
Base Style:
Pose 1 - Assorted Bases - Terracotta A
Pose 2 - Assorted Bases - Terracotta A
Bundle includes both models
Like this model? Click here to check out the rest of our collection from
Black Skull Studio
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Black Skull Studio
@BlackSkullStudio
If you would like to follow or support this artist, please check out the link below.
instagram.com/blackskull.studio
twitter.com/BlackSkullMX
![Kethra the Human Ranger](http://resinclad.com/cdn/shop/products/Human-KethraD_375x.png?v=1678736781 375w,//resinclad.com/cdn/shop/products/Human-KethraD_410x.png?v=1678736781 410w,//resinclad.com/cdn/shop/products/Human-KethraD_520x.png?v=1678736781 520w,//resinclad.com/cdn/shop/products/Human-KethraD_576x.png?v=1678736781 576w,//resinclad.com/cdn/shop/products/Human-KethraD_768x.png?v=1678736781 768w,//resinclad.com/cdn/shop/products/Human-KethraD_992x.png?v=1678736781 992w,//resinclad.com/cdn/shop/products/Human-KethraD_1024x.png?v=1678736781 1024w,//resinclad.com/cdn/shop/products/Human-KethraD_1280x.png?v=1678736781 1280w)
![Kethra the Human Ranger](http://resinclad.com/cdn/shop/products/WoWKethraP1-FrontwBase_375x.png?v=1678736789 375w,//resinclad.com/cdn/shop/products/WoWKethraP1-FrontwBase_410x.png?v=1678736789 410w,//resinclad.com/cdn/shop/products/WoWKethraP1-FrontwBase_520x.png?v=1678736789 520w,//resinclad.com/cdn/shop/products/WoWKethraP1-FrontwBase_576x.png?v=1678736789 576w,//resinclad.com/cdn/shop/products/WoWKethraP1-FrontwBase_768x.png?v=1678736789 768w,//resinclad.com/cdn/shop/products/WoWKethraP1-FrontwBase_992x.png?v=1678736789 992w,//resinclad.com/cdn/shop/products/WoWKethraP1-FrontwBase_1024x.png?v=1678736789 1024w,//resinclad.com/cdn/shop/products/WoWKethraP1-FrontwBase_1280x.png?v=1678736789 1280w)
Kethra the Human Ranger
from $5.99
32mm Scale
Base Size: 25mm
Base Style:
Pose 1 - Assorted Bases - Terracotta A
Pose 2 - Assorted Bases - Terracotta A
Bundle includes both models
Like this model? Click here to check out the rest of our collection from
Black Skull Studio
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Black Skull Studio
@BlackSkullStudio
If you would like to follow or support this artist, please check out the link below.
instagram.com/blackskull.studio
twitter.com/BlackSkullMX
![Korred Bundle](http://resinclad.com/cdn/shop/products/LabeledKorredsset_375x.jpg?v=1670014252 375w,//resinclad.com/cdn/shop/products/LabeledKorredsset_410x.jpg?v=1670014252 410w,//resinclad.com/cdn/shop/products/LabeledKorredsset_520x.jpg?v=1670014252 520w,//resinclad.com/cdn/shop/products/LabeledKorredsset_576x.jpg?v=1670014252 576w,//resinclad.com/cdn/shop/products/LabeledKorredsset_768x.jpg?v=1670014252 768w,//resinclad.com/cdn/shop/products/LabeledKorredsset_992x.jpg?v=1670014252 992w,//resinclad.com/cdn/shop/products/LabeledKorredsset_1024x.jpg?v=1670014252 1024w,//resinclad.com/cdn/shop/products/LabeledKorredsset_1280x.jpg?v=1670014252 1280w)
![Korred Bundle](http://resinclad.com/cdn/shop/products/resize-inst-korreds-v1_375x.jpg?v=1670346983 375w,//resinclad.com/cdn/shop/products/resize-inst-korreds-v1_410x.jpg?v=1670346983 410w,//resinclad.com/cdn/shop/products/resize-inst-korreds-v1_520x.jpg?v=1670346983 520w,//resinclad.com/cdn/shop/products/resize-inst-korreds-v1_576x.jpg?v=1670346983 576w,//resinclad.com/cdn/shop/products/resize-inst-korreds-v1_768x.jpg?v=1670346983 768w,//resinclad.com/cdn/shop/products/resize-inst-korreds-v1_992x.jpg?v=1670346983 992w,//resinclad.com/cdn/shop/products/resize-inst-korreds-v1_1024x.jpg?v=1670346983 1024w,//resinclad.com/cdn/shop/products/resize-inst-korreds-v1_1280x.jpg?v=1670346983 1280w)
Korred Bundle
from $4.99
Comes in 32mm scale
Base Size: 25mm
Base Style: Specialized
Bundle includes all 6 models
Like this model? Click here to check out the rest of our collection from White Werewolf Tavern
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
White Werewolf Tavern
@WWTavern
If you would like to follow or support this artist, please check out the links below.
patreon.com/whitewerewolftavern
www.instagram.com/wwtavern
myminifactory.com/users/WWTavern
facebook.com/miniatures3d
twitter.com/tavernww
![Melee Bandit](http://resinclad.com/cdn/shop/products/MeleeBandit_CastNPlay_375x.png?v=1643399416 375w,//resinclad.com/cdn/shop/products/MeleeBandit_CastNPlay_410x.png?v=1643399416 410w,//resinclad.com/cdn/shop/products/MeleeBandit_CastNPlay_520x.png?v=1643399416 520w,//resinclad.com/cdn/shop/products/MeleeBandit_CastNPlay_576x.png?v=1643399416 576w,//resinclad.com/cdn/shop/products/MeleeBandit_CastNPlay_768x.png?v=1643399416 768w,//resinclad.com/cdn/shop/products/MeleeBandit_CastNPlay_992x.png?v=1643399416 992w,//resinclad.com/cdn/shop/products/MeleeBandit_CastNPlay_1024x.png?v=1643399416 1024w,//resinclad.com/cdn/shop/products/MeleeBandit_CastNPlay_1280x.png?v=1643399416 1280w)
Melee Bandit
from $6.49
Base Size: 25mm
Base Style: Plain
Bundle includes all 7 models
Like this model? Click here to check out the rest of our collection from Cast n Play
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Cast n Play
@CastnPlay
If you would like to follow or support this artist, please check out the links below.
patreon.com/CastnPlay
instagram.com/CastnPlay
myminifactory.com/users/CastnPlay
facebook.com/CastnPlayMinis
youtube.com/castnplay
![Mimic Armor](http://resinclad.com/cdn/shop/products/resize-mimic-nightmares-armor_375x.jpg?v=1678822551 375w,//resinclad.com/cdn/shop/products/resize-mimic-nightmares-armor_410x.jpg?v=1678822551 410w,//resinclad.com/cdn/shop/products/resize-mimic-nightmares-armor_520x.jpg?v=1678822551 520w,//resinclad.com/cdn/shop/products/resize-mimic-nightmares-armor_576x.jpg?v=1678822551 576w,//resinclad.com/cdn/shop/products/resize-mimic-nightmares-armor_768x.jpg?v=1678822551 768w,//resinclad.com/cdn/shop/products/resize-mimic-nightmares-armor_992x.jpg?v=1678822551 992w,//resinclad.com/cdn/shop/products/resize-mimic-nightmares-armor_1024x.jpg?v=1678822551 1024w,//resinclad.com/cdn/shop/products/resize-mimic-nightmares-armor_1280x.jpg?v=1678822551 1280w)
![Mimic Armor](http://resinclad.com/cdn/shop/products/resize-mimic-nightmares-armor-normal_375x.jpg?v=1678822555 375w,//resinclad.com/cdn/shop/products/resize-mimic-nightmares-armor-normal_410x.jpg?v=1678822555 410w,//resinclad.com/cdn/shop/products/resize-mimic-nightmares-armor-normal_520x.jpg?v=1678822555 520w,//resinclad.com/cdn/shop/products/resize-mimic-nightmares-armor-normal_576x.jpg?v=1678822555 576w,//resinclad.com/cdn/shop/products/resize-mimic-nightmares-armor-normal_768x.jpg?v=1678822555 768w,//resinclad.com/cdn/shop/products/resize-mimic-nightmares-armor-normal_992x.jpg?v=1678822555 992w,//resinclad.com/cdn/shop/products/resize-mimic-nightmares-armor-normal_1024x.jpg?v=1678822555 1024w,//resinclad.com/cdn/shop/products/resize-mimic-nightmares-armor-normal_1280x.jpg?v=1678822555 1280w)
Mimic Armor
$10.99
32mm Scale
Includes both models
Like this model? Click here to check out the rest of our collection from
Black Skull Studio
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Black Skull Studio
@BlackSkullStudio
If you would like to follow or support this artist, please check out the link below.
instagram.com/blackskull.studio
twitter.com/BlackSkullMX
![Mimic Barrel](http://resinclad.com/cdn/shop/products/Mimic-Barrel_375x.png?v=1678822683 375w,//resinclad.com/cdn/shop/products/Mimic-Barrel_410x.png?v=1678822683 410w,//resinclad.com/cdn/shop/products/Mimic-Barrel_520x.png?v=1678822683 520w,//resinclad.com/cdn/shop/products/Mimic-Barrel_576x.png?v=1678822683 576w,//resinclad.com/cdn/shop/products/Mimic-Barrel_768x.png?v=1678822683 768w,//resinclad.com/cdn/shop/products/Mimic-Barrel_992x.png?v=1678822683 992w,//resinclad.com/cdn/shop/products/Mimic-Barrel_1024x.png?v=1678822683 1024w,//resinclad.com/cdn/shop/products/Mimic-Barrel_1280x.png?v=1678822683 1280w)
![Mimic Barrel](http://resinclad.com/cdn/shop/products/Mimic-BarrelMonster_full_375x.png?v=1678822683 375w,//resinclad.com/cdn/shop/products/Mimic-BarrelMonster_full_410x.png?v=1678822683 410w,//resinclad.com/cdn/shop/products/Mimic-BarrelMonster_full_520x.png?v=1678822683 520w,//resinclad.com/cdn/shop/products/Mimic-BarrelMonster_full_576x.png?v=1678822683 576w,//resinclad.com/cdn/shop/products/Mimic-BarrelMonster_full_768x.png?v=1678822683 768w,//resinclad.com/cdn/shop/products/Mimic-BarrelMonster_full_992x.png?v=1678822683 992w,//resinclad.com/cdn/shop/products/Mimic-BarrelMonster_full_1024x.png?v=1678822683 1024w,//resinclad.com/cdn/shop/products/Mimic-BarrelMonster_full_1280x.png?v=1678822683 1280w)
Mimic Barrel
$10.99
32mm Scale
Includes both models
Like this model? Click here to check out the rest of our collection from
Black Skull Studio
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Black Skull Studio
@BlackSkullStudio
If you would like to follow or support this artist, please check out the link below.
instagram.com/blackskull.studio
twitter.com/BlackSkullMX
![Mimic Bed](http://resinclad.com/cdn/shop/products/Mimic-Bed_full_375x.png?v=1678822752 375w,//resinclad.com/cdn/shop/products/Mimic-Bed_full_410x.png?v=1678822752 410w,//resinclad.com/cdn/shop/products/Mimic-Bed_full_520x.png?v=1678822752 520w,//resinclad.com/cdn/shop/products/Mimic-Bed_full_576x.png?v=1678822752 576w,//resinclad.com/cdn/shop/products/Mimic-Bed_full_768x.png?v=1678822752 768w,//resinclad.com/cdn/shop/products/Mimic-Bed_full_992x.png?v=1678822752 992w,//resinclad.com/cdn/shop/products/Mimic-Bed_full_1024x.png?v=1678822752 1024w,//resinclad.com/cdn/shop/products/Mimic-Bed_full_1280x.png?v=1678822752 1280w)
![Mimic Bed](http://resinclad.com/cdn/shop/products/Mimic-BedMonster_full_375x.png?v=1678822755 375w,//resinclad.com/cdn/shop/products/Mimic-BedMonster_full_410x.png?v=1678822755 410w,//resinclad.com/cdn/shop/products/Mimic-BedMonster_full_520x.png?v=1678822755 520w,//resinclad.com/cdn/shop/products/Mimic-BedMonster_full_576x.png?v=1678822755 576w,//resinclad.com/cdn/shop/products/Mimic-BedMonster_full_768x.png?v=1678822755 768w,//resinclad.com/cdn/shop/products/Mimic-BedMonster_full_992x.png?v=1678822755 992w,//resinclad.com/cdn/shop/products/Mimic-BedMonster_full_1024x.png?v=1678822755 1024w,//resinclad.com/cdn/shop/products/Mimic-BedMonster_full_1280x.png?v=1678822755 1280w)
Mimic Bed
$10.99
32mm Scale
Includes both models
Like this model? Click here to check out the rest of our collection from
Black Skull Studio
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Black Skull Studio
@BlackSkullStudio
If you would like to follow or support this artist, please check out the link below.
instagram.com/blackskull.studio
twitter.com/BlackSkullMX
![Mimic Bookcase](http://resinclad.com/cdn/shop/products/Mimic-Bookcase_375x.png?v=1678822905 375w,//resinclad.com/cdn/shop/products/Mimic-Bookcase_410x.png?v=1678822905 410w,//resinclad.com/cdn/shop/products/Mimic-Bookcase_520x.png?v=1678822905 520w,//resinclad.com/cdn/shop/products/Mimic-Bookcase_576x.png?v=1678822905 576w,//resinclad.com/cdn/shop/products/Mimic-Bookcase_768x.png?v=1678822905 768w,//resinclad.com/cdn/shop/products/Mimic-Bookcase_992x.png?v=1678822905 992w,//resinclad.com/cdn/shop/products/Mimic-Bookcase_1024x.png?v=1678822905 1024w,//resinclad.com/cdn/shop/products/Mimic-Bookcase_1280x.png?v=1678822905 1280w)
![Mimic Bookcase](http://resinclad.com/cdn/shop/products/Mimic-BookcaseMonster_complete_375x.png?v=1678822908 375w,//resinclad.com/cdn/shop/products/Mimic-BookcaseMonster_complete_410x.png?v=1678822908 410w,//resinclad.com/cdn/shop/products/Mimic-BookcaseMonster_complete_520x.png?v=1678822908 520w,//resinclad.com/cdn/shop/products/Mimic-BookcaseMonster_complete_576x.png?v=1678822908 576w,//resinclad.com/cdn/shop/products/Mimic-BookcaseMonster_complete_768x.png?v=1678822908 768w,//resinclad.com/cdn/shop/products/Mimic-BookcaseMonster_complete_992x.png?v=1678822908 992w,//resinclad.com/cdn/shop/products/Mimic-BookcaseMonster_complete_1024x.png?v=1678822908 1024w,//resinclad.com/cdn/shop/products/Mimic-BookcaseMonster_complete_1280x.png?v=1678822908 1280w)
Mimic Bookcase
$12.99
32mm Scale
Includes both models
Like this model? Click here to check out the rest of our collection from
Black Skull Studio
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Black Skull Studio
@BlackSkullStudio
If you would like to follow or support this artist, please check out the link below.
instagram.com/blackskull.studio
twitter.com/BlackSkullMX
![Mimic Cache & Cache](http://resinclad.com/cdn/shop/products/Cache_mimic_375x.png?v=1669992985 375w,//resinclad.com/cdn/shop/products/Cache_mimic_410x.png?v=1669992985 410w,//resinclad.com/cdn/shop/products/Cache_mimic_520x.png?v=1669992985 520w,//resinclad.com/cdn/shop/products/Cache_mimic_576x.png?v=1669992985 576w,//resinclad.com/cdn/shop/products/Cache_mimic_768x.png?v=1669992985 768w,//resinclad.com/cdn/shop/products/Cache_mimic_992x.png?v=1669992985 992w,//resinclad.com/cdn/shop/products/Cache_mimic_1024x.png?v=1669992985 1024w,//resinclad.com/cdn/shop/products/Cache_mimic_1280x.png?v=1669992985 1280w)
Mimic Cache & Cache
$4.99
$0.86
Comes in 32mm scale
Includes both models
Like this model? Click here to check out the rest of our collection from White Werewolf Tavern
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
White Werewolf Tavern
@WWTavern
If you would like to follow or support this artist, please check out the links below.
patreon.com/whitewerewolftavern
www.instagram.com/wwtavern
myminifactory.com/users/WWTavern
facebook.com/miniatures3d
twitter.com/tavernww
![Mimic Cellar Door](http://resinclad.com/cdn/shop/products/resize-mimic-nightmares-hatch-full_375x.jpg?v=1678823862 375w,//resinclad.com/cdn/shop/products/resize-mimic-nightmares-hatch-full_410x.jpg?v=1678823862 410w,//resinclad.com/cdn/shop/products/resize-mimic-nightmares-hatch-full_520x.jpg?v=1678823862 520w,//resinclad.com/cdn/shop/products/resize-mimic-nightmares-hatch-full_576x.jpg?v=1678823862 576w,//resinclad.com/cdn/shop/products/resize-mimic-nightmares-hatch-full_768x.jpg?v=1678823862 768w,//resinclad.com/cdn/shop/products/resize-mimic-nightmares-hatch-full_992x.jpg?v=1678823862 992w,//resinclad.com/cdn/shop/products/resize-mimic-nightmares-hatch-full_1024x.jpg?v=1678823862 1024w,//resinclad.com/cdn/shop/products/resize-mimic-nightmares-hatch-full_1280x.jpg?v=1678823862 1280w)
![Mimic Cellar Door](http://resinclad.com/cdn/shop/products/resize-mimic-nightmares-hatch-monster_375x.jpg?v=1678823862 375w,//resinclad.com/cdn/shop/products/resize-mimic-nightmares-hatch-monster_410x.jpg?v=1678823862 410w,//resinclad.com/cdn/shop/products/resize-mimic-nightmares-hatch-monster_520x.jpg?v=1678823862 520w,//resinclad.com/cdn/shop/products/resize-mimic-nightmares-hatch-monster_576x.jpg?v=1678823862 576w,//resinclad.com/cdn/shop/products/resize-mimic-nightmares-hatch-monster_768x.jpg?v=1678823862 768w,//resinclad.com/cdn/shop/products/resize-mimic-nightmares-hatch-monster_992x.jpg?v=1678823862 992w,//resinclad.com/cdn/shop/products/resize-mimic-nightmares-hatch-monster_1024x.jpg?v=1678823862 1024w,//resinclad.com/cdn/shop/products/resize-mimic-nightmares-hatch-monster_1280x.jpg?v=1678823862 1280w)
Mimic Cellar Door
from $8.99
32mm Scale
Includes both models (Cellar Door & Mimic)Size:Small Door - 23mm x 17mmLarge Door - 46.5mm x 34mm
Like this model? Click here to check out the rest of our collection from
Black Skull Studio
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Black Skull Studio
@BlackSkullStudio
If you would like to follow or support this artist, please check out the link below.
instagram.com/blackskull.studio
twitter.com/BlackSkullMX
![Mimic Chair](http://resinclad.com/cdn/shop/products/Mimic-Chair_375x.png?v=1678823061 375w,//resinclad.com/cdn/shop/products/Mimic-Chair_410x.png?v=1678823061 410w,//resinclad.com/cdn/shop/products/Mimic-Chair_520x.png?v=1678823061 520w,//resinclad.com/cdn/shop/products/Mimic-Chair_576x.png?v=1678823061 576w,//resinclad.com/cdn/shop/products/Mimic-Chair_768x.png?v=1678823061 768w,//resinclad.com/cdn/shop/products/Mimic-Chair_992x.png?v=1678823061 992w,//resinclad.com/cdn/shop/products/Mimic-Chair_1024x.png?v=1678823061 1024w,//resinclad.com/cdn/shop/products/Mimic-Chair_1280x.png?v=1678823061 1280w)
![Mimic Chair](http://resinclad.com/cdn/shop/products/Mimic-ChairMonster_full_375x.png?v=1678823066 375w,//resinclad.com/cdn/shop/products/Mimic-ChairMonster_full_410x.png?v=1678823066 410w,//resinclad.com/cdn/shop/products/Mimic-ChairMonster_full_520x.png?v=1678823066 520w,//resinclad.com/cdn/shop/products/Mimic-ChairMonster_full_576x.png?v=1678823066 576w,//resinclad.com/cdn/shop/products/Mimic-ChairMonster_full_768x.png?v=1678823066 768w,//resinclad.com/cdn/shop/products/Mimic-ChairMonster_full_992x.png?v=1678823066 992w,//resinclad.com/cdn/shop/products/Mimic-ChairMonster_full_1024x.png?v=1678823066 1024w,//resinclad.com/cdn/shop/products/Mimic-ChairMonster_full_1280x.png?v=1678823066 1280w)
Mimic Chair
$7.99
32mm Scale
Includes both models
Like this model? Click here to check out the rest of our collection from
Black Skull Studio
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Black Skull Studio
@BlackSkullStudio
If you would like to follow or support this artist, please check out the link below.
instagram.com/blackskull.studio
twitter.com/BlackSkullMX
![Mimic Chest](http://resinclad.com/cdn/shop/products/Mimic-Chest_375x.png?v=1678823251 375w,//resinclad.com/cdn/shop/products/Mimic-Chest_410x.png?v=1678823251 410w,//resinclad.com/cdn/shop/products/Mimic-Chest_520x.png?v=1678823251 520w,//resinclad.com/cdn/shop/products/Mimic-Chest_576x.png?v=1678823251 576w,//resinclad.com/cdn/shop/products/Mimic-Chest_768x.png?v=1678823251 768w,//resinclad.com/cdn/shop/products/Mimic-Chest_992x.png?v=1678823251 992w,//resinclad.com/cdn/shop/products/Mimic-Chest_1024x.png?v=1678823251 1024w,//resinclad.com/cdn/shop/products/Mimic-Chest_1280x.png?v=1678823251 1280w)
![Mimic Chest](http://resinclad.com/cdn/shop/products/Mimic-ChestMonster_full_375x.png?v=1678823253 375w,//resinclad.com/cdn/shop/products/Mimic-ChestMonster_full_410x.png?v=1678823253 410w,//resinclad.com/cdn/shop/products/Mimic-ChestMonster_full_520x.png?v=1678823253 520w,//resinclad.com/cdn/shop/products/Mimic-ChestMonster_full_576x.png?v=1678823253 576w,//resinclad.com/cdn/shop/products/Mimic-ChestMonster_full_768x.png?v=1678823253 768w,//resinclad.com/cdn/shop/products/Mimic-ChestMonster_full_992x.png?v=1678823253 992w,//resinclad.com/cdn/shop/products/Mimic-ChestMonster_full_1024x.png?v=1678823253 1024w,//resinclad.com/cdn/shop/products/Mimic-ChestMonster_full_1280x.png?v=1678823253 1280w)
Mimic Chest
$6.99
32mm Scale
Includes both models
Like this model? Click here to check out the rest of our collection from
Black Skull Studio
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Black Skull Studio
@BlackSkullStudio
If you would like to follow or support this artist, please check out the link below.
instagram.com/blackskull.studio
twitter.com/BlackSkullMX
![Mimic Closet](http://resinclad.com/cdn/shop/products/Mimic-Closet_375x.png?v=1678823401 375w,//resinclad.com/cdn/shop/products/Mimic-Closet_410x.png?v=1678823401 410w,//resinclad.com/cdn/shop/products/Mimic-Closet_520x.png?v=1678823401 520w,//resinclad.com/cdn/shop/products/Mimic-Closet_576x.png?v=1678823401 576w,//resinclad.com/cdn/shop/products/Mimic-Closet_768x.png?v=1678823401 768w,//resinclad.com/cdn/shop/products/Mimic-Closet_992x.png?v=1678823401 992w,//resinclad.com/cdn/shop/products/Mimic-Closet_1024x.png?v=1678823401 1024w,//resinclad.com/cdn/shop/products/Mimic-Closet_1280x.png?v=1678823401 1280w)
![Mimic Closet](http://resinclad.com/cdn/shop/products/Mimic-ClosetMonster_full_375x.png?v=1678823404 375w,//resinclad.com/cdn/shop/products/Mimic-ClosetMonster_full_410x.png?v=1678823404 410w,//resinclad.com/cdn/shop/products/Mimic-ClosetMonster_full_520x.png?v=1678823404 520w,//resinclad.com/cdn/shop/products/Mimic-ClosetMonster_full_576x.png?v=1678823404 576w,//resinclad.com/cdn/shop/products/Mimic-ClosetMonster_full_768x.png?v=1678823404 768w,//resinclad.com/cdn/shop/products/Mimic-ClosetMonster_full_992x.png?v=1678823404 992w,//resinclad.com/cdn/shop/products/Mimic-ClosetMonster_full_1024x.png?v=1678823404 1024w,//resinclad.com/cdn/shop/products/Mimic-ClosetMonster_full_1280x.png?v=1678823404 1280w)
Mimic Closet
$12.99
32mm Scale
Includes both models
Like this model? Click here to check out the rest of our collection from
Black Skull Studio
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Black Skull Studio
@BlackSkullStudio
If you would like to follow or support this artist, please check out the link below.
instagram.com/blackskull.studio
twitter.com/BlackSkullMX
![Mimic Gate](http://resinclad.com/cdn/shop/products/MimicNightmares-Gate_full_375x.png?v=1678823577 375w,//resinclad.com/cdn/shop/products/MimicNightmares-Gate_full_410x.png?v=1678823577 410w,//resinclad.com/cdn/shop/products/MimicNightmares-Gate_full_520x.png?v=1678823577 520w,//resinclad.com/cdn/shop/products/MimicNightmares-Gate_full_576x.png?v=1678823577 576w,//resinclad.com/cdn/shop/products/MimicNightmares-Gate_full_768x.png?v=1678823577 768w,//resinclad.com/cdn/shop/products/MimicNightmares-Gate_full_992x.png?v=1678823577 992w,//resinclad.com/cdn/shop/products/MimicNightmares-Gate_full_1024x.png?v=1678823577 1024w,//resinclad.com/cdn/shop/products/MimicNightmares-Gate_full_1280x.png?v=1678823577 1280w)
![Mimic Gate](http://resinclad.com/cdn/shop/products/MimicNightmares-GateMonster_375x.png?v=1678823579 375w,//resinclad.com/cdn/shop/products/MimicNightmares-GateMonster_410x.png?v=1678823579 410w,//resinclad.com/cdn/shop/products/MimicNightmares-GateMonster_520x.png?v=1678823579 520w,//resinclad.com/cdn/shop/products/MimicNightmares-GateMonster_576x.png?v=1678823579 576w,//resinclad.com/cdn/shop/products/MimicNightmares-GateMonster_768x.png?v=1678823579 768w,//resinclad.com/cdn/shop/products/MimicNightmares-GateMonster_992x.png?v=1678823579 992w,//resinclad.com/cdn/shop/products/MimicNightmares-GateMonster_1024x.png?v=1678823579 1024w,//resinclad.com/cdn/shop/products/MimicNightmares-GateMonster_1280x.png?v=1678823579 1280w)
Mimic Gate
$19.99
32mm Scale
Includes both models
Like this model? Click here to check out the rest of our collection from
Black Skull Studio
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Black Skull Studio
@BlackSkullStudio
If you would like to follow or support this artist, please check out the link below.
instagram.com/blackskull.studio
twitter.com/BlackSkullMX
![Mimic Grave & Grave](http://resinclad.com/cdn/shop/products/Mimic_Grave_1_375x.jpg?v=1661888140 375w,//resinclad.com/cdn/shop/products/Mimic_Grave_1_410x.jpg?v=1661888140 410w,//resinclad.com/cdn/shop/products/Mimic_Grave_1_520x.jpg?v=1661888140 520w,//resinclad.com/cdn/shop/products/Mimic_Grave_1_576x.jpg?v=1661888140 576w,//resinclad.com/cdn/shop/products/Mimic_Grave_1_768x.jpg?v=1661888140 768w,//resinclad.com/cdn/shop/products/Mimic_Grave_1_992x.jpg?v=1661888140 992w,//resinclad.com/cdn/shop/products/Mimic_Grave_1_1024x.jpg?v=1661888140 1024w,//resinclad.com/cdn/shop/products/Mimic_Grave_1_1280x.jpg?v=1661888140 1280w)
![Mimic Grave & Grave](http://resinclad.com/cdn/shop/products/Mimic_Grave_3_375x.jpg?v=1661888146 375w,//resinclad.com/cdn/shop/products/Mimic_Grave_3_410x.jpg?v=1661888146 410w,//resinclad.com/cdn/shop/products/Mimic_Grave_3_520x.jpg?v=1661888146 520w,//resinclad.com/cdn/shop/products/Mimic_Grave_3_576x.jpg?v=1661888146 576w,//resinclad.com/cdn/shop/products/Mimic_Grave_3_768x.jpg?v=1661888146 768w,//resinclad.com/cdn/shop/products/Mimic_Grave_3_992x.jpg?v=1661888146 992w,//resinclad.com/cdn/shop/products/Mimic_Grave_3_1024x.jpg?v=1661888146 1024w,//resinclad.com/cdn/shop/products/Mimic_Grave_3_1280x.jpg?v=1661888146 1280w)
Mimic Grave & Grave
$9.99
Comes in 32mm scale
Includes both models
Like this model? Click here to check out the rest of our collection from White Werewolf Tavern
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
White Werewolf Tavern
@WWTavern
If you would like to follow or support this artist, please check out the links below.
patreon.com/whitewerewolftavern
www.instagram.com/wwtavern
myminifactory.com/users/WWTavern
facebook.com/miniatures3d
twitter.com/tavernww
![Mimic Mirror & Mirror](http://resinclad.com/cdn/shop/products/mimic_mirror_375x.png?v=1661888396 375w,//resinclad.com/cdn/shop/products/mimic_mirror_410x.png?v=1661888396 410w,//resinclad.com/cdn/shop/products/mimic_mirror_520x.png?v=1661888396 520w,//resinclad.com/cdn/shop/products/mimic_mirror_576x.png?v=1661888396 576w,//resinclad.com/cdn/shop/products/mimic_mirror_768x.png?v=1661888396 768w,//resinclad.com/cdn/shop/products/mimic_mirror_992x.png?v=1661888396 992w,//resinclad.com/cdn/shop/products/mimic_mirror_1024x.png?v=1661888396 1024w,//resinclad.com/cdn/shop/products/mimic_mirror_1280x.png?v=1661888396 1280w)
![Mimic Mirror & Mirror](http://resinclad.com/cdn/shop/products/mimic_mirror2_375x.png?v=1661888396 375w,//resinclad.com/cdn/shop/products/mimic_mirror2_410x.png?v=1661888396 410w,//resinclad.com/cdn/shop/products/mimic_mirror2_520x.png?v=1661888396 520w,//resinclad.com/cdn/shop/products/mimic_mirror2_576x.png?v=1661888396 576w,//resinclad.com/cdn/shop/products/mimic_mirror2_768x.png?v=1661888396 768w,//resinclad.com/cdn/shop/products/mimic_mirror2_992x.png?v=1661888396 992w,//resinclad.com/cdn/shop/products/mimic_mirror2_1024x.png?v=1661888396 1024w,//resinclad.com/cdn/shop/products/mimic_mirror2_1280x.png?v=1661888396 1280w)
Mimic Mirror & Mirror
$9.99
Comes in 32mm scale
Includes both models
Like this model? Click here to check out the rest of our collection from White Werewolf Tavern
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
White Werewolf Tavern
@WWTavern
If you would like to follow or support this artist, please check out the links below.
patreon.com/whitewerewolftavern
www.instagram.com/wwtavern
myminifactory.com/users/WWTavern
facebook.com/miniatures3d
twitter.com/tavernww