Products

Approximate size: Baby Dragon Turtle - 60.5mm x 66.5mm x 65mm Baby Kraken - 22mm x 28mm x 16mm Baby Phoenix - 21.5mm x 27.5mm x 15.5mm Base Info: Baby Dragon Turtle - 75mm - Plain Baby Kraken - 25mm - Plain Baby Phoenix - 25mm - Plain Comes in 32mm scale Bundle includes all 3 models  Like this model? Click here to check out the rest of our collection from Manuel Boria Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Manuel Boria @ManuelBoria If you would like to follow or support this artist, please check out the links below. patreon.com/ManuelBoria myminifactory.com/users/Manuel_Boria

Approximate size: Anchor and Palm Tree - 94mm x 66mm x 69mm Palm Tree Rocks - 86mm x 80mm x 80mm Baby Turtles - 54.5mm x 35.5mm x 16mm Big Leaves - 48.5mm x 28mm x 40.5mm Bindweed - 69mm x 36mm x 32mm Eggs Supplies - 51mm x 38.5mm x 35mm Post Seagull - 50mm x 31mm x 41.5mm Rock Crab - 62mm x 37mm x 36.5mm Rock Snails - 71mm x 31mm x 25mm Sand Castle - 34.5mm x 37mm x 27.5mm Shell Crabs - 57mm x 34.5mm x 28.5mm Shore Rocks A - 65.5mm x 83.5mm x 40mm Shore Rocks B - 103.5mm x 63.5mm x 42.5mm Shore Supplies - 92mm x 65.5mm x 37.5mm Tiny Palm Rocks - 60.5mm x 45.5mm x 34.5mm Comes in 32mm scale Bundle includes all 15 models     Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Broken Boats - 75mm x 154.5mm x 42mm Crooked Palm Tree - 56.5mm x 86.5mm x 82mm Palm Tree 4 Crowns - 48.5mm x 77mm x 93mm Palm Tree Bush - 76.5mm x 127mm x 103.5mm Palm Tree Duo - 50mm x 106mm x 92mm Palm Tree Trio - 60.5mm x 79mm x 90mm Rock Bit A - 59.5mm x 84mm x 53.5mm Rock Bit B - 55.5mm x 72mm x 35.5mm Tall Palm Tree A - 50mm x 76mm x 124.5mm Tall Palm Tree B - 69mm x 77mm x 115.5mm Thick Palm Tree - 43.5mm x 42.5mm x 72.5mm Broken Barrel - 49.5mm x 64mm x 20mm Iguana Trunk - 50.5mm x 70.5mm x 43.5mm Small Palm Bit - 68.5mm x 91mm x 39mm Wooden Posts - 25.5mm x 61.5mm x 37mm Comes in 32mm scaleBundle includes all 15 models  Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Arch Palm Tree - 68mm x 89mm x 77mm Big Rock Palm Tree - 150mm x 99mm x 99mm Rock Palm Tree - 75.5mm x 92mm x 91.5mm Rock Arch - 75mm x 90.5mm x 96mm Shore Rocks 01 - 94mm x 200mm x 104.5mm Shore Rocks 02 - 124.5mm x 111.5mm x 78mm Shore Rocks 03 - 85mm x 117mm x 88mm Shore Rocks 04 - 96.5mm x 74mm x 55.5mm Shore Rocks 05 - 90.5mm x 94mm x 62.5mm Thin Rock Arch - 69.5mm x 122.5mm x 96.5mm Comes in 32mm scaleBundle includes all 10 models  Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Crustacean - A - 41mm x 54mm x 40mm Crustacean - B - 49mm x 45mm x 38mm Crustacean - C - 43.5mm x 53mm x 32.5mm Crustacean - D - 40mm x 47mm x 32mm Crustacean - E - 47.5mm x 39mm x 36.5mm Base Info: Tidal - 50mm - RoundComes in 32mm scaleBundle includes all 5 models  Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Deep Sea Valkyrie - A - Rider - 66mm x 92mm x 61mm Deep Sea Valkyrie - A - No Rider - 57.5mm x 73mm x 35.5mm Deep Sea Valkyrie - B - Rider - 68mm x 84mm x 67.5mm Deep Sea Valkyrie - B - No Rider - 40mm x 71mm x 66mm Deep Sea Valkyrie - C - Rider - 54mm x 77mm x 106mm Deep Sea Valkyrie - C - No Rider - 37mm x 65mm x 86.5mm Base Info: Tidal - 50mm - RoundComes in 32mm scaleBundle includes all 3 models  Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: 66mm x 46.5mm x 57mmBase Info: Legion - 50mm - RoundComes in 32mm scale  Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Base Size: 25mm Base Style: Ocean Floor & Ocean Bundle includes all 4 models   Like this model? Click here to check out the rest of our collection from Goon Master Games   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC. is a licensed distributor of these 3D prints designed by: Goon Master Games @GoonMasterGames If you would like to follow or support this artist, please check out the links below. patreon.com/GoonMasterGames instagram.com/GoonMasterGames myminifactory.com/users/GoonMasterGames

Base Size: 25mm Base Style: Ocean Floor Bundle includes all 5 models   Like this model? Click here to check out the rest of our collection from Goon Master Games   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC. is a licensed distributor of these 3D prints designed by: Goon Master Games @GoonMasterGames If you would like to follow or support this artist, please check out the links below. patreon.com/GoonMasterGames instagram.com/GoonMasterGames myminifactory.com/users/GoonMasterGames

32mm Scale Approximate Size: 43mm x 25mm x 14mm Base not included Like this model? Click here to check out the rest of our collection from 3DIPStudios   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: 3DIPStudios @3DIPStudios If you would like to follow or support this artist, please check out the link below. instagram.com/3dipstudios

Size: Giant Clam Closed - 32mm x 19mm x 30mm Giant Clam Open - 32mm x 26mm x 30mm Includes both models   Like this model? Click here to check out the rest of our collection from Goon Master Games   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC. is a licensed distributor of these 3D prints designed by: Goon Master Games @GoonMasterGames If you would like to follow or support this artist, please check out the links below. patreon.com/GoonMasterGames instagram.com/GoonMasterGames myminifactory.com/users/GoonMasterGames

Size: 25.5mm x 17.5mm x 33.5mm   Like this model? Click here to check out the rest of our collection from 3DIPStudios   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: 3DIPStudios @3DIPStudios If you would like to follow or support this artist, please check out the link below. instagram.com/3dipstudios

Approximate size: Merkyes Coral Sniper - A - 42mm x 33.5mm x 55mm Merkyes Coral Sniper - B - 47mm x 37mm x 56mm Merkyes Coral Sniper - C - 40.5mm x 30.5mm x 55mm Merkyes Coral Sniper - D - 40mm x 43.5mm x 47.5mm Base Info: Tidal - 30mm - RoundComes in 32mm scaleBundle includes all 4 models  Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Merkyes Oracle Bearer - A - 58mm x 44mm x 48.5mm Merkyes Oracle Bearer - B - 65mm x 48.5mm x 49.5mm Base Info: Tidal - 35mm - RoundComes in 32mm scaleBundle includes both models  Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Merkyes Siren Scout - A - 34.5mm x 30mm x 50mm Merkyes Siren Scout - B - 32mm x 29.5mm x 45.5mm Merkyes Siren Scout - C - 29.5mm x 30mm x 40.5mm Merkyes Siren Scout - D - 34.5mm x 30mm x 54mm Merkyes Siren Scout - E - 32mm x 29.5mm x 47.5mm Merkyes Siren Scout - F - 34.5mm x 31.5mm x 47mm Base Info: Tidal - 30mm - RoundComes in 32mm scaleBundle includes all 6 models  Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Merkyes Trident Batallion - A - 43mm x 41mm x 44mm Merkyes Trident Batallion - B - 47.5mm x 37.5mm x 47.5mm Merkyes Trident Batallion - C - 50mm x 42.5mm x 44.5mm Merkyes Trident Batallion - D - 42mm x 38mm x 51mm Base Info: Tidal - 35mm - RoundComes in 32mm scaleBundle includes all 4 models  Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Beach Floor Tile 2x2 B - 50.5mm x 50.5mm x 11.5mm Beach Floor Tile 4X4 A - 101mm x 101mm x 11.5mm Beach Floor Tile 4x4 B - 101mm x 101mm x 12.5mm Cave Floor Tile 2x2 A - 50.5mm x 50.5mm x 12mm Cave Floor Tile 2x2 B - 50.5mm x 50.5mm x 12mm Cave Floor Tile 4X4 A - 101mm x 101mm x 13mm Cave Floor Tile 4x4 B - 101mm x 101mm x 13mm Desert Floor Tile 2x2 A - 50.5mm x 50.5mm x 11.5mm Desert Floor Tile 2x2 B - 50.5mm x 50.5mm x 11.5mm Desert Floor Tile 4X4 A - 101mm x 101mm x 12mm Desert Floor Tile 4x4 B - 101mm x 101mm x 13mm Forest Floor Tile 2x2 A - 50.5mm x 50.5mm x 12mm Forest Floor Tile 2x2 B - 50.5mm x 50.5mm x 12mm Forest Floor Tile 4X4 A - 101mm x 101mm x 12mm Forest Floor Tile 4x4 B - 101mm x 101mm x 12mm Frostlands Floor Tile 2x2 A - 50.5mm x 50.5mm x 12mm Frostlands Floor Tile 2x2 B - 50.5mm x 50.5mm x 12mm Frostlands Floor Tile 4X4 A - 101mm x 101mm x 13.5mm Frostlands Floor Tile 4x4 B - 101mm x 101mm x 13.5mm Jungle Floor Tile 2x2 A - 50.5mm x 50.5mm x 12mm Jungle Floor Tile 2x2 B - 50.5mm x 50.5mm x 12mm Jungle Floor Tile 4X4 A - 101mm x 101mm x 12mm Jungle Floor Tile 4x4 B - 101mm x 101mm x 12mm Meadows Floor Tile 2x2 A - 50.5mm x 50.5mm x 12mm Meadows Floor Tile 2x2 B - 50.5mm x 50.5mm x 12mm Meadows Floor Tile 4X4 A - 101mm x 101mm x 12mm Meadows Floor Tile 4x4 B - 101mm x 101mm x 12mm Ocean Floor Tile 2x2 A - 50.5mm x 50.5mm x 12.5mm Ocean Floor Tile 2x2 B - 50.5mm x 50.5mm x 12.5mm Ocean Floor Tile 4X4 A - 101mm x 101mm x 13mm Ocean Floor Tile 4x4 B - 101mm x 101mm x 13mm Oriental Floor Tile 2x2 A - 50.5mm x 50.5mm x 11.5mm Oriental Floor Tile 2x2 B - 50.5mm x 50.5mm x 11.5mm Oriental Floor Tile 4X4 A - 101mm x 101mm x 12mm Oriental Floor Tile 4x4 B - 101mm x 101mm x 12mm Savanna Floor Tile 2x2 A - 50.5mm x 50.5mm x 11.5mm Savanna Floor Tile 2x2 B - 50.5mm x 50.5mm x 11.5mm Savanna Floor Tile 4X4 A - 101mm x 101mm x 12mm Savanna Floor Tile 4x4 B - 101mm x 101mm x 12mm Swamp Floor Tile 2x2 A - 50.5mm x 50.5mm x 11mm Swamp Floor Tile 2x2 B - 50.5mm x 50.5mm x 11mm Swamp Floor Tile 4X4 A - 101mm x 101mm x 11.5mm Swamp Floor Tile 4x4 B - 101mm x 101mm x 12mm Volcano Floor Tile 2x2 A - 50.5mm x 50.5mm x 12.5mm Volcano Floor Tile 2x2 B - 50.5mm x 50.5mm x 13.5mm Volcano Floor Tile 4X4 A - 101mm x 101mm x 13.5mm Volcano Floor Tile 4x4 B - 101mm x 101mm x 14mm Wastelands Floor Tile 2x2 A - 50.5mm x 50.5mm x 12.5mm Wastelands Floor Tile 2x2 B - 50.5mm x 50.5mm x 13mm Wastelands Floor Tile 4X4 A - 101mm x 101mm x 19.5mm Wastelands Floor Tile 4x4 B - 101mm x 101mm x 19mm Comes in 32mm scale Includes model and 2 Open Lock clips These models use the Open Lock system to connect. If you are in need of extra Open Lock Clips please make sure to look at our listing and add some to your cart before checking out.   Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Cave Wall M - 125.5mm x 38.5mm x 80mm Cave Wall S 01 - 68.5mm x 29.5mm x 69.5mm Cave Wall S 02 - 68.5mm x 27.5mm x 73mm Desert Wall M - 125.5mm x 35.5mm x 86.5mm Desert Wall S 01 - 68.5mm x 26mm x 75.5mm Desert Wall S 02 - 68.5mm x 23mm x 73.5mm Frostlands Wall M - 125.5mm x 39.5mm x 77.5mm Frostlands Wall S 01 - 68.5mm x 27.5mm x 74mm Frostlands Wall S 02 - 68.5mm x 32mm x 75mm Jungle Wall M - 125.5mm x 30mm x 80mm Jungle Wall S 01 - 68.5mm x 29.5mm x 66mm Jungle Wall S 02 - 68.5mm x 27mm x 68mm Ocean Wall M - 125.5mm x 40.5mm x 77mm Ocean Wall S 01 - 68.5mm x 35.5mm x 73mm Ocean Wall S 02 - 68.5mm x 35.5mm x 74.5mm Oriental Wall M - 125.5mm x 34mm x 88.5mm Oriental Wall S 01 - 68.5mm x 31mm x 76.5mm Oriental Wall S 02 - 68.5mm x 33mm x 74mm Savanna Wall M - 125.5mm x 33.5mm x 87mm Savanna Wall S 01 - 68.5mm x 39.5mm x 73.5mm Savanna Wall S 02 - 68.5mm x 28.5mm x 73.5mm Swamp Wall M - 125.5mm x 31.5mm x 70mm Swamp Wall S 01 - 68.5mm x 35.5mm x 73.5mm Swamp Wall S 02 - 68.5mm x 31.5mm x 69.5mm Volcano Wall M - 125.5mm x 37.5mm x 77mm Volcano Wall S 01 - 28.5mm x 25.5mm x 73mm Volcano Wall S 02 - 68.5mm x 23.5mm x 74.5mm Wastelands Wall M - 125.5mm x 37mm x 78.5mm Wastelands Wall S 01 - 68.5mm x 27.5mm x 73.5mm Wastelands Wall S 02 - 68.5mm x 28.5mm x 69mm Comes in 32mm scale Models include 2 end caps Set includes all 3 models & 4 end caps Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Cave Platform - 234.5mm x 153mm x 107.5mm Desert Platform - 182.5mm x 197.5mm x 44mm Forest Platform - 200mm x 163mm x 204.5mm Frostlands Platform - 228.5mm x 129mm x 98mm Jungle Platform - 224.5mm x 149mm x 130.5mm Ocean Platform - 260mm x 168.5mm x 143mm Oriental Platform - 211mm x 140.5mm x 111mm Savanna Platform - 188.5mm x 123mm x 118mm Swamp Platform - 206.5mm x 157.5mm x 115.5mm Volcano Platform - 234.5mm x 177mm x 120.5mm Wastelands Platform - 211mm x 155mm x 74mm Comes in 32mm scale Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

32mm Scale Game base not included Like this model? Click here to check out the rest of our collection from 3DIPStudios   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: 3DIPStudios @3DIPStudios If you would like to follow or support this artist, please check out the link below. instagram.com/3dipstudios

Approximate size: Tortl - Bare A - 28.5mm x 34mm x 43.5mm Tortl - Bare B - 44mm x 44.5mm x 28mm Tortl - Explorer A - 30.5mm x 50.5mm x 50.5mm Tortl - Explorer B - 41mm x 46.5mm x 25mm Tortl - Pirate A - 52.5mm x 43.5mm x 26.5mm Tortl - Pirate B - 50mm x 44mm x 38.5mm Base Info: Underwater - 50mmComes in 32mm scaleLike this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Turtle - A - 40mm x 34.5mm x 33mm Turtle - B - 41mm x 26mm x 32mm Turtle - C - 42.5mm x 24mm x 33.5mm Turtle - D - 31.5mm x 26mm x 33.5mm Base Info: Turtle - A - 25mm - Brick W/Chain Turtle - B - 25mm - Brick W/Chain Turtle - C - 25mm - Brick Turtle - D - 25mm - Brick Bundle includes all 4 modelsLike this model? Click here to check out the rest of our collection from Chibiatures Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes. All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time. All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring. The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes. Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out. Resinclad LLC is a licensed distributor of these 3D prints designed by: Chibiatures @Chibiatures If you would like to follow or support this artist, please check out the link below. Chibiatures.com

Approximate size: Turtle - A - 30.5mm x 24mm x 35mm Turtle - B - 39.5mm x 23mm x 35mm Turtle - C - 51mm x 36mm x 34.5mm Turtle - D - 43mm x 36.5mm x 33.5mm Base Info: Turtle - A - 25mm - Brick W/Chain Turtle - B - 25mm - Brick Turtle - C - 25mm - Brick W/Chain Turtle - D - 25mm - Brick Bundle includes all 4 modelsLike this model? Click here to check out the rest of our collection from Chibiatures Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes. All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time. All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring. The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes. Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out. Resinclad LLC is a licensed distributor of these 3D prints designed by: Chibiatures @Chibiatures If you would like to follow or support this artist, please check out the link below. Chibiatures.com

Approximate size: Turtle - A - 33.5mm x 47.5mm x 38mm Turtle - B - 30.5mm x 42mm x 38mm Turtle - C - 72.5mm x 36.5mm x 35.5mm Turtle - D - 37.5mm x 24mm x 37mm Base Info: Turtle - A - 25mm - Brick Turtle - B - 25mm - Brick W/Chain Turtle - C - 25mm - Brick W/Chain Turtle - D - 25mm - Brick Bundle includes all 4 modelsLike this model? Click here to check out the rest of our collection from Chibiatures Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes. All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time. All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring. The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes. Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out. Resinclad LLC is a licensed distributor of these 3D prints designed by: Chibiatures @Chibiatures If you would like to follow or support this artist, please check out the link below. Chibiatures.com

Approximate size: Turtle - A - 25.5mm x 41mm x 36.5mm Turtle - B - 24mm x 24.5mm x 35.5mm Turtle - C - 40mm x 31.5mm x 33.5mm Turtle - D - 29mm x 35mm x 33.5mm Cannonballs - 14.5mm x 16mm x 14.5mm Cannon - 35.5mm x 26.5mm x 24.5mm Base Info: Turtle - A - 25mm - Brick Turtle - B - 25mm - Brick W/Chain Turtle - C - 25mm - Brick Turtle - D - 25mm - Brick W/Chain Bundle includes all 6 models   Like this model? Click here to check out the rest of our collection from Chibiatures Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes. All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time. All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring. The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes. Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out. Resinclad LLC is a licensed distributor of these 3D prints designed by: Chibiatures @Chibiatures If you would like to follow or support this artist, please check out the link below. Chibiatures.com