All products
3DIPStudios
Adventurer's Toolkit
All Models
Black Skull Studio
Busts
Cast n Play
Chibiatures
Crab Miniatures
Dark Realms Forge
Dioramas
Galaad Miniatures
Goon Master Games
Hold My Miniatures
Manuel Boria
Mini Bases
Miniatures
Painted Models
QB Works
Rocket Pig Games
Terrain
The Witchguild
ToyDoy Miniatures
White Werewolf Tavern
Witchsong Miniatures

Basing Bits - Manhole Covers
$9.99
Basing Bits are designed to add flare to your miniature bases and terrain
Comes in 32mm scale
Includes all 10 models
Like this model? Click here to check out the rest of our collection from Goon Master Games
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Goon Master Games
@GoonMasterGames
If you would like to follow or support this artist, please check out the links below.
patreon.com/GoonMasterGames
instagram.com/GoonMasterGames
myminifactory.com/users/GoonMasterGames

Belowground Floor
from $59.99
Comes in 32mm scale
Like this model? Click here to check out the rest of our collection from Cast n Play
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Cast n Play
@CastnPlay
If you would like to follow or support this artist, please check out the links below.
patreon.com/CastnPlay
instagram.com/CastnPlay
myminifactory.com/users/CastnPlay
facebook.com/CastnPlayMinis
youtube.com/castnplay

Belowground Props
$20.99
Comes in 32mm scale
Like this model? Click here to check out the rest of our collection from Cast n Play
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Cast n Play
@CastnPlay
If you would like to follow or support this artist, please check out the links below.
patreon.com/CastnPlay
instagram.com/CastnPlay
myminifactory.com/users/CastnPlay
facebook.com/CastnPlayMinis
youtube.com/castnplay

Belowground Walls
from $149.99
Comes in 32mm scale
Like this model? Click here to check out the rest of our collection from Cast n Play
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Cast n Play
@CastnPlay
If you would like to follow or support this artist, please check out the links below.
patreon.com/CastnPlay
instagram.com/CastnPlay
myminifactory.com/users/CastnPlay
facebook.com/CastnPlayMinis
youtube.com/castnplay

City Street Bases
from $1.50
Like this model? Click here to check out the rest of our collection from Galaad Miniatures
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Galaad Miniatures
@GalaadMiniatures
If you would like to follow or support this artist, please check out the links below.
patreon.com/galaad
facebook.com/galaadminiatures
instagram.com/galaad_miniatures
myminifactory.com/users/galaad


Cobblestone Road Bases
from $2.74
Like this model? Click here to check out the rest of our collection from Goon Master Games
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Goon Master Games
@GoonMasterGames
If you would like to follow or support this artist, please check out the links below.
patreon.com/GoonMasterGames
instagram.com/GoonMasterGames
myminifactory.com/users/GoonMasterGames

Crypt Floor Tiles
from $89.99
Comes in 32mm scale
Like this model? Click here to check out the rest of our collection from Cast n Play
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Cast n Play
@CastnPlay
If you would like to follow or support this artist, please check out the links below.
patreon.com/CastnPlay
instagram.com/CastnPlay
myminifactory.com/users/CastnPlay
facebook.com/CastnPlayMinis
youtube.com/castnplay

Crypt Walls
from $149.99
Comes in 32mm scale
Like this model? Click here to check out the rest of our collection from Cast n Play
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Cast n Play
@CastnPlay
If you would like to follow or support this artist, please check out the links below.
patreon.com/CastnPlay
instagram.com/CastnPlay
myminifactory.com/users/CastnPlay
facebook.com/CastnPlayMinis
youtube.com/castnplay

Dungeon Bases
from $1.24
Like this model? Click here to check out the rest of our collection from Cast n Play
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Cast n Play
@CastnPlay
If you would like to follow or support this artist, please check out the links below.
patreon.com/CastnPlay
instagram.com/CastnPlay
myminifactory.com/users/CastnPlay
facebook.com/CastnPlayMinis
youtube.com/castnplay


Farmers of Mennesker City
from $7.74
Approximate size:
Iksten - 24mm x 21.5mm x 34.5mm
Korion - 20mm x 14mm x 37.5mm
Paulus - 34mm x 26mm x 44mm
Ulmar - 29.5mm x 18.5mm x 37.5mm
Base Info: Mennesker - 25mmComes in 32mm scaleLike this model? Click here to check out the rest of our collection from Cast n Play
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Cast n Play
@CastnPlay
If you would like to follow or support this artist, please check out the links below.
patreon.com/CastnPlay
instagram.com/CastnPlay
myminifactory.com/users/CastnPlay
facebook.com/CastnPlayMinis
youtube.com/castnplay


Fishers of Mennesker City
from $6.24
Approximate size:
Margit - 20mm x 20.5mm x 36.5mm
Noraki - 35.5mm x 19.5mm x 34.5mm
Wallen - 22.5mm x 27.5mm x 49.5mm
Base Info: Mennesker - 25mmComes in 32mm scaleLike this model? Click here to check out the rest of our collection from Cast n Play
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Cast n Play
@CastnPlay
If you would like to follow or support this artist, please check out the links below.
patreon.com/CastnPlay
instagram.com/CastnPlay
myminifactory.com/users/CastnPlay
facebook.com/CastnPlayMinis
youtube.com/castnplay


Giant Fly Bundle
from $5.99
Base Size: 35mm Flight
Base Style: Sewer
With Base: Includes 35mm Sewer Base attached to model
Bundle includes both models
Like this model? Click here to check out the rest of our collection from Goon Master Games
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC. is a licensed distributor of these 3D prints designed by:
Goon Master Games
@GoonMasterGames
If you would like to follow or support this artist, please check out the links below.
patreon.com/GoonMasterGames
instagram.com/GoonMasterGames
myminifactory.com/users/GoonMasterGames

Gyfdore Ashspawn
from $7.99
Base Size: 30mm
Base Style: Sewer Base - Round
Bundle includes both models
Like this model? Click here to check out the rest of our collection from Cast n Play
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Cast n Play
@CastnPlay
If you would like to follow or support this artist, please check out the links below.
patreon.com/CastnPlay
instagram.com/CastnPlay
myminifactory.com/users/CastnPlay
facebook.com/CastnPlayMinis
youtube.com/castnplay


Inkeepers of the Blind Cyclops
from $6.24
Approximate size:
Krossos - 18mm x 12.5mm x 36.5mm
Zagan - 27.54mm x 17mm x 38.5mm
Base Info: Mennesker - 25mmComes in 32mm scaleLike this model? Click here to check out the rest of our collection from Cast n Play
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Cast n Play
@CastnPlay
If you would like to follow or support this artist, please check out the links below.
patreon.com/CastnPlay
instagram.com/CastnPlay
myminifactory.com/users/CastnPlay
facebook.com/CastnPlayMinis
youtube.com/castnplay

Inok Poisonghoul
from $7.99
Base Size: 35mm
Base Style: Sewer Base - Square (not pictured)
Bundle includes both models
Like this model? Click here to check out the rest of our collection from Cast n Play
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Cast n Play
@CastnPlay
If you would like to follow or support this artist, please check out the links below.
patreon.com/CastnPlay
instagram.com/CastnPlay
myminifactory.com/users/CastnPlay
facebook.com/CastnPlayMinis
youtube.com/castnplay

Karros Terrorfreak
from $12.99
Base Size: 75mm
Base Style: Sewer Base - Round
Like this model? Click here to check out the rest of our collection from Cast n Play
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Cast n Play
@CastnPlay
If you would like to follow or support this artist, please check out the links below.
patreon.com/CastnPlay
instagram.com/CastnPlay
myminifactory.com/users/CastnPlay
facebook.com/CastnPlayMinis
youtube.com/castnplay


Lowlifes of Mennesker City
from $6.49
Approximate size:
Dremek - 39.5mm x 32mm x 38.5mm
Kyros - 22mm x 16.5mm x 40.5mm
Roland - 27.5mm x 18.5mm x 31mm
Ruangor - 29mm x 22.5mm x 47mm
Vorlach - 20.5mm x 22mm x 37.5mm
Base Info:
Dremek - 30mm - Mennesker
Kyros - 25mm - Mennesker
Roland - 30mm - Mennesker
Ruangor - 30mm - Mennesker
Vorlach - 25mm - Mennesker
Comes in 32mm scaleLike this model? Click here to check out the rest of our collection from Cast n Play
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Cast n Play
@CastnPlay
If you would like to follow or support this artist, please check out the links below.
patreon.com/CastnPlay
instagram.com/CastnPlay
myminifactory.com/users/CastnPlay
facebook.com/CastnPlayMinis
youtube.com/castnplay


Mafia Leaders of Mennesker City
from $6.24
Approximate size:
"No Tongue" Savana - 28mm x 19mm x 35mm
"Secrets" Leonder - 22mm x 17mm x 28mm
"Typhoon" Harry - 28mm x 28.5mm x 36mm
Xandras - 21.5mm x 16.5mm x 37.5mm
Base Info: Mennesker - 25mmComes in 32mm scaleLike this model? Click here to check out the rest of our collection from Cast n Play
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Cast n Play
@CastnPlay
If you would like to follow or support this artist, please check out the links below.
patreon.com/CastnPlay
instagram.com/CastnPlay
myminifactory.com/users/CastnPlay
facebook.com/CastnPlayMinis
youtube.com/castnplay

Mennesker City Bases
from $2.99
Like this model? Click here to check out the rest of our collection from Cast n Play
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Cast n Play
@CastnPlay
If you would like to follow or support this artist, please check out the links below.
patreon.com/CastnPlay
instagram.com/CastnPlay
myminifactory.com/users/CastnPlay
facebook.com/CastnPlayMinis
youtube.com/castnplay


Mutant Rat Bundle
from $7.24
Approximate size:
Mutant Rat - V1 - 23mm x 42mm x 47.5mm
Mutant Rat - V2 - 33mm x 40.5mm x 29mm
Mutant Rat - V3 - 24mm x 36.5mm x 34mm
Mutant Rat - V4 - 30.5mm x 41.5mm x 33.5mm
Mutant Rat - V5 - 37mm x 24.5mm x 36.5mm
Mutant Rat - V6 - 28.5mm x 50mm x 33mm
Base Style: Specialized
Comes in 32mm scaleBundle includes all 6 models
Like this model? Click here to check out the rest of our collection from White Werewolf Tavern
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
White Werewolf Tavern
@WWTavern
If you would like to follow or support this artist, please check out the links below.
patreon.com/whitewerewolftavern
www.instagram.com/wwtavern
myminifactory.com/users/WWTavern
facebook.com/miniatures3d
twitter.com/tavernww


Mutant Rat Mount Bundle
from $17.74
Approximate size:
Mutant Rat Mount - V1 - 52.5mm x 80.5mm x 52.5mm
Mutant Rat Mount - V2 - 53mm x 108mm x 52.5mm
Mutant Rat Mount - V3 - 65mm x 94mm x 53mm
Mutant Rat Mount - V4 - 53mm x 70mm x 55.5mm
Mutant Rat Mount - V5 - 59.5mm x 96mm x 55mm
Mutant Rat Mount - V6 - 63.5mm x 74.5mm x 48.5mm
Base Style: Specialized
Comes in 32mm scaleBundle includes all 6 models
Like this model? Click here to check out the rest of our collection from White Werewolf Tavern
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
White Werewolf Tavern
@WWTavern
If you would like to follow or support this artist, please check out the links below.
patreon.com/whitewerewolftavern
www.instagram.com/wwtavern
myminifactory.com/users/WWTavern
facebook.com/miniatures3d
twitter.com/tavernww

Mutant Rat Rider
$9.99
Approximate size: 61.5mm x 76.5mm x 69mmBase Style: Specialized
Comes in 32mm scale
Like this model? Click here to check out the rest of our collection from White Werewolf Tavern
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
White Werewolf Tavern
@WWTavern
If you would like to follow or support this artist, please check out the links below.
patreon.com/whitewerewolftavern
www.instagram.com/wwtavern
myminifactory.com/users/WWTavern
facebook.com/miniatures3d
twitter.com/tavernww


Night Soil - Diorama
$29.99
Comes in 32mm scale
Like this model? Click here to check out the rest of our collection from Goon Master Games
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Goon Master Games
@GoonMasterGames
If you would like to follow or support this artist, please check out the links below.
patreon.com/GoonMasterGames
instagram.com/GoonMasterGames
myminifactory.com/users/GoonMasterGames


Ninja Rat Bundle
from $5.99
Base Size: 25mm
Base Style: Clay Brick
Bundle includes all 9 models
Like this model? Click here to check out the rest of our collection from Goon Master Games
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Goon Master Games
@GoonMasterGames
If you would like to follow or support this artist, please check out the links below.
patreon.com/GoonMasterGames
instagram.com/GoonMasterGames
myminifactory.com/users/GoonMasterGames

Nok Darkripper
from $7.99
Base Size: 35mm
Base Style: Sewer Base - Hero
Includes modular weapons & hands pictured.
Like this model? Click here to check out the rest of our collection from Cast n Play
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Cast n Play
@CastnPlay
If you would like to follow or support this artist, please check out the links below.
patreon.com/CastnPlay
instagram.com/CastnPlay
myminifactory.com/users/CastnPlay
facebook.com/CastnPlayMinis
youtube.com/castnplay