All products
3DIPStudios
Adventurer's Toolkit
All Models
Black Skull Studio
Busts
Cast n Play
Chibiatures
Crab Miniatures
Dark Realms Forge
Dioramas
Galaad Miniatures
Goon Master Games
Hold My Miniatures
Manuel Boria
Mini Bases
Miniatures
Painted Models
QB Works
Rocket Pig Games
Terrain
The Witchguild
ToyDoy Miniatures
White Werewolf Tavern
Witchsong Miniatures

Chameleon Bundle
from $6.99
Base Size: 25mm
Base Style: Plain Square
Bundle includes all 6 models
Like this model? Click here to check out the rest of our collection from 3DIPStudios
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
3DIPStudios
@3DIPStudios
If you would like to follow or support this artist, please check out the link below.
instagram.com/3dipstudios

Creepy Surgeon Bundle
from $5.74
Approximate size:
Creepy Surgeons - A - 30.5mm x 33mm x 39.5mm
Creepy Surgeons - B - 24mm x 24mm x 35mm
Base Info: Scrapyard - 25mm - RoundComes in 32mm scaleBundle includes both modelsLike this model? Click here to check out the rest of our collection from Cast n Play
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Cast n Play
@CastnPlay
If you would like to follow or support this artist, please check out the links below.
patreon.com/CastnPlay
instagram.com/CastnPlay
myminifactory.com/users/CastnPlay
facebook.com/CastnPlayMinis
youtube.com/castnplay


Cult Assassin
from $9.49
Comes in 32mm or 75mm scale
Base Style: Specialized
Like this model? Click here to check out the rest of our collection from White Werewolf Tavern
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
White Werewolf Tavern
@WWTavern
If you would like to follow or support this artist, please check out the links below.
patreon.com/whitewerewolftavern
www.instagram.com/wwtavern
myminifactory.com/users/WWTavern
facebook.com/miniatures3d
twitter.com/tavernww

Eztli, Ikal Shaman Bundle
from $10.49
Approximate size:
Eztli, Ikal Shaman - A - 69.5mm x 28.5mm x 48mm
Eztli, Ikal Shaman - B - 46mm x 52mm x 59mm
Base Info:
Eztli, Ikal Shaman - A - 50mm - Temple - Round
Eztli, Ikal Shaman - B - 25mm - Temple - Round
Comes in 32mm scaleBundle includes both models
Like this model? Click here to check out the rest of our collection from Cast n Play
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Cast n Play
@CastnPlay
If you would like to follow or support this artist, please check out the links below.
patreon.com/CastnPlay
instagram.com/CastnPlay
myminifactory.com/users/CastnPlay
facebook.com/CastnPlayMinis
youtube.com/castnplay


Flower Bundle
from $17.99
Size:
Flower 1 - 86mm x 61.5mm x 72.5mm
Flower 2 - 94mm x 71.5mm x 93mm
Bundle includes both models
Like this model? Click here to check out the rest of our collection from White Werewolf Tavern
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
White Werewolf Tavern
@WWTavern
If you would like to follow or support this artist, please check out the links below.
patreon.com/whitewerewolftavern
www.instagram.com/wwtavern
myminifactory.com/users/WWTavern
facebook.com/miniatures3d
twitter.com/tavernww

Giant Sand Scorpion
from $7.99
Base Size: 75mm
Base Style: Desert Sand
Like this model? Click here to check out the rest of our collection from Goon Master Games
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC. is a licensed distributor of these 3D prints designed by:
Goon Master Games
@GoonMasterGames
If you would like to follow or support this artist, please check out the links below.
patreon.com/GoonMasterGames
instagram.com/GoonMasterGames
myminifactory.com/users/GoonMasterGames

Kalothen, Poison Green Dragon
$196.99
Comes in 32mm scale
Like this model? Click here to check out the rest of our collection from Cast n Play
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Cast n Play
@CastnPlay
If you would like to follow or support this artist, please check out the links below.
patreon.com/CastnPlay
instagram.com/CastnPlay
myminifactory.com/users/CastnPlay
facebook.com/CastnPlayMinis
youtube.com/castnplay

Komodo Dragon
$7.99
Size: 29.5mm x 20mm x 34mm
Like this model? Click here to check out the rest of our collection from 3DIPStudios
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
3DIPStudios
@3DIPStudios
If you would like to follow or support this artist, please check out the link below.
instagram.com/3dipstudios

Poisonteeth Worm
$7.99
Size: 25.5mm x 31.5mm x 29.5mm
Like this model? Click here to check out the rest of our collection from Cast n Play
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Cast n Play
@CastnPlay
If you would like to follow or support this artist, please check out the links below.
patreon.com/CastnPlay
instagram.com/CastnPlay
myminifactory.com/users/CastnPlay
facebook.com/CastnPlayMinis
youtube.com/castnplay

Raptor Cavalry Bundle
from $6.99
Base Size: 25mm
Base Style: Plain Square
Bundle includes all 3 models
Like this model? Click here to check out the rest of our collection from 3DIPStudios
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
3DIPStudios
@3DIPStudios
If you would like to follow or support this artist, please check out the link below.
instagram.com/3dipstudios

Saurian Temple Guard Bundle
from $7.99
Base Size: 25mm
Base Style: Plain Square
Bundle includes all 6 models
Like this model? Click here to check out the rest of our collection from 3DIPStudios
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
3DIPStudios
@3DIPStudios
If you would like to follow or support this artist, please check out the link below.
instagram.com/3dipstudios

Saurian Warrior Bundle
from $7.99
Base Size: 25mm
Base Style: Plain Square
Bundle includes all 6 models
Like this model? Click here to check out the rest of our collection from 3DIPStudios
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
3DIPStudios
@3DIPStudios
If you would like to follow or support this artist, please check out the link below.
instagram.com/3dipstudios

Skink Hunter Bundle
from $6.99
Base Size: 25mm
Base Style: Plain Square
Bundle includes all 6 models
Like this model? Click here to check out the rest of our collection from 3DIPStudios
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
3DIPStudios
@3DIPStudios
If you would like to follow or support this artist, please check out the link below.
instagram.com/3dipstudios

Tepeu, Royal Warrior Bundle
from $10.99
Approximate size:
Tepeu, Royal Warrior - A - 57.5mm x 62.5mm x 54.5mm
Tepeu, Royal Warrior - B - 42mm x 21.5mm x 73.5mm
Base Info:
Tepeu, Royal Warrior - A - 25mm - Temple - Round
Tepeu, Royal Warrior - B - 50mm - Temple - Round
Comes in 32mm scaleBundle includes both models
Like this model? Click here to check out the rest of our collection from Cast n Play
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Cast n Play
@CastnPlay
If you would like to follow or support this artist, please check out the links below.
patreon.com/CastnPlay
instagram.com/CastnPlay
myminifactory.com/users/CastnPlay
facebook.com/CastnPlayMinis
youtube.com/castnplay


The Spitter Scorched Tail
from $13.74
Approximate size:
32mm - 64mm x 54.5mm x 42mm
75mm - 135mm x 115mm x 89mm
Base Style: SpecializedComes in 32mm or 75mm scale
Like this model? Click here to check out the rest of our collection from White Werewolf Tavern
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
White Werewolf Tavern
@WWTavern
If you would like to follow or support this artist, please check out the links below.
patreon.com/whitewerewolftavern
www.instagram.com/wwtavern
myminifactory.com/users/WWTavern
facebook.com/miniatures3d
twitter.com/tavernww


Vatt the Bat
from $4.24
Approximate size:
Vatt - Bare A - 38mm x 21.5mm x 14mm
Vatt - Bare B - 44.5mm x 20.5mm x 29mm
Vatt - Thief A - 44mm x 20mm x 24.5mm
Vatt - Thief B - 31.5mm x 20.5mm x 19.5mm
Vatt - Wizard A - 21.5mm x 14mm x 16.5mm
Vatt - Wizard B - 32mm x 23mm x 25mm
Base Info:
Vatt - Bare A - 15mm - Grass
Vatt - Bare B - 15mm - Dirt
Vatt - Thief A - 15mm - Dirt
Vatt - Thief B - 15mm - Grass
Vatt - Wizard A - 15mm - Grass
Vatt - Wizard B - 15mm - Dirt
Comes in 32mm scale
Like this model? Click here to check out the rest of our collection from Cast n Play
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Cast n Play
@CastnPlay
If you would like to follow or support this artist, please check out the links below.
patreon.com/CastnPlay
instagram.com/CastnPlay
myminifactory.com/users/CastnPlay
facebook.com/CastnPlayMinis
youtube.com/castnplay