Products

 Size: 56mm Oval   Like this model? Click here to check out the rest of our collection from 3DIPStudios   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: 3DIPStudios @3DIPStudios If you would like to follow or support this artist, please check out the link below. instagram.com/3dipstudios

Approximate size: Badgg - Apothecary A - 11mm x 23mm x 18.5mm Badgg - Apothecary B - 12mm x 18.5mm x 16.5mm Badgg - Bare A - 10mm x 22.5mm x 12.5mm Badgg - Bare B - 13.5mm x 18mm x 18mm Badgg - Thief A - 23mm x 16mm x 18.5mm Badgg - Thief B - 14.5mm x 21mm x 14mm Base Info: Badgg - Apothecary A - 25mm - Grass and Dirt Badgg - Apothecary B - 25mm - Grass and Dirt Badgg - Bare A - 25mm - Grass and Dirt Badgg - Bare B - 25mm - Dirt Badgg - Thief A - 25mm - Dirt Badgg - Thief B - 25mm - Dirt Comes in 32mm scale Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Basing Bits are designed to add flare to your miniature bases and terrain Comes in 32mm scale  Includes all 7 models   Like this model? Click here to check out the rest of our collection from Goon Master Games   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Goon Master Games @GoonMasterGames If you would like to follow or support this artist, please check out the links below. patreon.com/GoonMasterGames instagram.com/GoonMasterGames myminifactory.com/users/GoonMasterGames

Basing Bits are designed to add flare to your miniature bases and terrain Comes in 32mm scale  Includes all 5 models      Like this model? Click here to check out the rest of our collection from Goon Master Games   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Goon Master Games @GoonMasterGames If you would like to follow or support this artist, please check out the links below. patreon.com/GoonMasterGames instagram.com/GoonMasterGames myminifactory.com/users/GoonMasterGames

Basing Bits are designed to add flare to your miniature bases and terrain Comes in 32mm scale  Includes all 5 models   Like this model? Click here to check out the rest of our collection from Goon Master Games   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Goon Master Games @GoonMasterGames If you would like to follow or support this artist, please check out the links below. patreon.com/GoonMasterGames instagram.com/GoonMasterGames myminifactory.com/users/GoonMasterGames

Basing Bits are designed to add flare to your miniature bases and terrain Comes in 32mm scale  Includes all 5 models   Like this model? Click here to check out the rest of our collection from Goon Master Games   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Goon Master Games @GoonMasterGames If you would like to follow or support this artist, please check out the links below. patreon.com/GoonMasterGames instagram.com/GoonMasterGames myminifactory.com/users/GoonMasterGames

Basing Bits are designed to add flare to your miniature bases and terrain Comes in 32mm scale  Includes all 5 models      Like this model? Click here to check out the rest of our collection from Goon Master Games   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Goon Master Games @GoonMasterGames If you would like to follow or support this artist, please check out the links below. patreon.com/GoonMasterGames instagram.com/GoonMasterGames myminifactory.com/users/GoonMasterGames

Basing Bits are designed to add flare to your miniature bases and terrain Comes in 32mm scale  Includes all 5 models   Like this model? Click here to check out the rest of our collection from Goon Master Games   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Goon Master Games @GoonMasterGames If you would like to follow or support this artist, please check out the links below. patreon.com/GoonMasterGames instagram.com/GoonMasterGames myminifactory.com/users/GoonMasterGames

Basing Bits are designed to add flare to your miniature bases and terrain Comes in 32mm scale  Includes all 5 models   Like this model? Click here to check out the rest of our collection from Goon Master Games   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Goon Master Games @GoonMasterGames If you would like to follow or support this artist, please check out the links below. patreon.com/GoonMasterGames instagram.com/GoonMasterGames myminifactory.com/users/GoonMasterGames

Basing Bits are designed to add flare to your miniature bases and terrain Comes in 32mm scale Includes all 7 models   Like this model? Click here to check out the rest of our collection from Goon Master Games   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Goon Master Games @GoonMasterGames If you would like to follow or support this artist, please check out the links below. patreon.com/GoonMasterGames instagram.com/GoonMasterGames myminifactory.com/users/GoonMasterGames

Basing Bits are designed to add flare to your miniature bases and terrain Comes in 32mm scale  Includes all 5 models   Like this model? Click here to check out the rest of our collection from Goon Master Games   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Goon Master Games @GoonMasterGames If you would like to follow or support this artist, please check out the links below. patreon.com/GoonMasterGames instagram.com/GoonMasterGames myminifactory.com/users/GoonMasterGames

Comes in 32mm scale Base Size: 25mm Base Style: Plain Round   Like this model? Click here to check out the rest of our collection from White Werewolf Tavern   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: White Werewolf Tavern @WWTavern If you would like to follow or support this artist, please check out the links below. patreon.com/whitewerewolftavern www.instagram.com/wwtavern myminifactory.com/users/WWTavern facebook.com/miniatures3d twitter.com/tavernww

32mm scale Includes all 7 models   Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

32mm scale Includes all 3 models   Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Like this model? Click here to check out the rest of our collection from Goon Master Games   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Goon Master Games @GoonMasterGames If you would like to follow or support this artist, please check out the links below. patreon.com/GoonMasterGames instagram.com/GoonMasterGames myminifactory.com/users/GoonMasterGames

Like this model? Click here to check out the rest of our collection from Goon Master Games   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Goon Master Games @GoonMasterGames If you would like to follow or support this artist, please check out the links below. patreon.com/GoonMasterGames instagram.com/GoonMasterGames myminifactory.com/users/GoonMasterGames

Approximate size: Mini Waterfall A - 66.5mm x 76mm x 53.5mm Mini Waterfall B - 56mm x 71.5mm x 45mm Small Trunk - 73mm x 75mm x 62.5mm Big Bush Rocks - 51mm x 78mm x 36mm Layered Trunk - 46mm x 55.5mm x 33.5mm Piled Rocks - 48mm x 66.5mm x 24.5mm Jungle Rock Group A - 59mm x 62.5mm x 43.5mm Jungle Rock Group B - 67mm x 88.5mm x 39.5mm Tall Stump - 46mm x 55.5mm x 51mm Tilted Stump - 58.5mm x 76mm x 41.5mm Cashew Tree - 110.5mm x 130mm x 135.5mm Kapok Tree - 105mm x 125.5mm x 111.5mm Short Kapok Tree - 98.5mm x 167mm x 96.5mm Slim Cashew Tree - 65.5mm x 70.5mm x 135mm Tree on Rock - 106mm x 127mm x 125.5mm Comes in 32mm scale   Bundle includes all 15 models     Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Double Waterfall - 142.5mm x 198.5mm x 146.5mm Side Tree Waterfall - 121mm x 145mm x 172.5mm Waterfall Pond - 179.5mm x 248mm x 169.5mm Waterfall Tree - 172.5mm x 236mm x 203mm Jungle River L - 116mm x 112.5mm x 25.5mm Jungle River S 01 - 133mm x 101mm x 39.5mm Jungle River S 02 - 136.5mm x 110mm x 35.5mm Jungle River I 01 - 133mm x 92mm x 40mm Jungle River I 02 - 133mm x 905mm x 42mm Jungle River I 03 - 133mm x 94mm x 45mm Jungle River End - 90.5mm x 96.5mm x 34mm Comes in 32mm scale Bundle includes all 12 sets     Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Comes in 32mm scale Base Size: 50mm Base Style: Specialized    Like this model? Click here to check out the rest of our collection from White Werewolf Tavern   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: White Werewolf Tavern @WWTavern If you would like to follow or support this artist, please check out the links below. patreon.com/whitewerewolftavern www.instagram.com/wwtavern myminifactory.com/users/WWTavern facebook.com/miniatures3d twitter.com/tavernww

Comes in 32mm scale Base Size: 50mm Base Style: Specialized    Like this model? Click here to check out the rest of our collection from White Werewolf Tavern   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: White Werewolf Tavern @WWTavern If you would like to follow or support this artist, please check out the links below. patreon.com/whitewerewolftavern www.instagram.com/wwtavern myminifactory.com/users/WWTavern facebook.com/miniatures3d twitter.com/tavernww