![Basing Bits - Pug](http://resinclad.com/cdn/shop/files/Pug_375x.png?v=1691169677 375w,//resinclad.com/cdn/shop/files/Pug_410x.png?v=1691169677 410w,//resinclad.com/cdn/shop/files/Pug_520x.png?v=1691169677 520w,//resinclad.com/cdn/shop/files/Pug_576x.png?v=1691169677 576w,//resinclad.com/cdn/shop/files/Pug_768x.png?v=1691169677 768w,//resinclad.com/cdn/shop/files/Pug_992x.png?v=1691169677 992w,//resinclad.com/cdn/shop/files/Pug_1024x.png?v=1691169677 1024w,//resinclad.com/cdn/shop/files/Pug_1280x.png?v=1691169677 1280w)
Basing Bits - Pug
$7.99
Basing Bits are designed to add flare to your miniature bases and terrain
Comes in 32mm scale
Includes all 5 models
Like this model? Click here to check out the rest of our collection from Goon Master Games
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Goon Master Games
@GoonMasterGames
If you would like to follow or support this artist, please check out the links below.
patreon.com/GoonMasterGames
instagram.com/GoonMasterGames
myminifactory.com/users/GoonMasterGames
![Border Collie](http://resinclad.com/cdn/shop/files/BorderCollie_375x.jpg?v=1689365712 375w,//resinclad.com/cdn/shop/files/BorderCollie_410x.jpg?v=1689365712 410w,//resinclad.com/cdn/shop/files/BorderCollie_520x.jpg?v=1689365712 520w,//resinclad.com/cdn/shop/files/BorderCollie_576x.jpg?v=1689365712 576w,//resinclad.com/cdn/shop/files/BorderCollie_768x.jpg?v=1689365712 768w,//resinclad.com/cdn/shop/files/BorderCollie_992x.jpg?v=1689365712 992w,//resinclad.com/cdn/shop/files/BorderCollie_1024x.jpg?v=1689365712 1024w,//resinclad.com/cdn/shop/files/BorderCollie_1280x.jpg?v=1689365712 1280w)
Border Collie
$3.49
32mm Scale
Approximate Size: 27.5mm x 8mm x 18mm
Base not included
Like this model? Click here to check out the rest of our collection from 3DIPStudios
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
3DIPStudios
@3DIPStudios
If you would like to follow or support this artist, please check out the link below.
instagram.com/3dipstudios
![Bull Terrier](http://resinclad.com/cdn/shop/files/BULLTERRIER_375x.png?v=1689365406 375w,//resinclad.com/cdn/shop/files/BULLTERRIER_410x.png?v=1689365406 410w,//resinclad.com/cdn/shop/files/BULLTERRIER_520x.png?v=1689365406 520w,//resinclad.com/cdn/shop/files/BULLTERRIER_576x.png?v=1689365406 576w,//resinclad.com/cdn/shop/files/BULLTERRIER_768x.png?v=1689365406 768w,//resinclad.com/cdn/shop/files/BULLTERRIER_992x.png?v=1689365406 992w,//resinclad.com/cdn/shop/files/BULLTERRIER_1024x.png?v=1689365406 1024w,//resinclad.com/cdn/shop/files/BULLTERRIER_1280x.png?v=1689365406 1280w)
Bull Terrier
$4.49
32mm Scale
Approximate Size: 23mm x 8mm x 19.5mm
Base not included
Like this model? Click here to check out the rest of our collection from 3DIPStudios
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
3DIPStudios
@3DIPStudios
If you would like to follow or support this artist, please check out the link below.
instagram.com/3dipstudios
![Bulldog](http://resinclad.com/cdn/shop/files/BULLDOG_375x.png?v=1689364991 375w,//resinclad.com/cdn/shop/files/BULLDOG_410x.png?v=1689364991 410w,//resinclad.com/cdn/shop/files/BULLDOG_520x.png?v=1689364991 520w,//resinclad.com/cdn/shop/files/BULLDOG_576x.png?v=1689364991 576w,//resinclad.com/cdn/shop/files/BULLDOG_768x.png?v=1689364991 768w,//resinclad.com/cdn/shop/files/BULLDOG_992x.png?v=1689364991 992w,//resinclad.com/cdn/shop/files/BULLDOG_1024x.png?v=1689364991 1024w,//resinclad.com/cdn/shop/files/BULLDOG_1280x.png?v=1689364991 1280w)
Bulldog
$3.99
32mm Scale
Approximate Size: 22.5mm x 11mm x 15.5mm
Base not included
Like this model? Click here to check out the rest of our collection from 3DIPStudios
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
3DIPStudios
@3DIPStudios
If you would like to follow or support this artist, please check out the link below.
instagram.com/3dipstudios
![Caravan Rhino](http://resinclad.com/cdn/shop/products/420_CaravanRhino_375x.jpg?v=1648064123 375w,//resinclad.com/cdn/shop/products/420_CaravanRhino_410x.jpg?v=1648064123 410w,//resinclad.com/cdn/shop/products/420_CaravanRhino_520x.jpg?v=1648064123 520w,//resinclad.com/cdn/shop/products/420_CaravanRhino_576x.jpg?v=1648064123 576w,//resinclad.com/cdn/shop/products/420_CaravanRhino_768x.jpg?v=1648064123 768w,//resinclad.com/cdn/shop/products/420_CaravanRhino_992x.jpg?v=1648064123 992w,//resinclad.com/cdn/shop/products/420_CaravanRhino_1024x.jpg?v=1648064123 1024w,//resinclad.com/cdn/shop/products/420_CaravanRhino_1280x.jpg?v=1648064123 1280w)
Caravan Rhino
$39.99
32mm Scale
Size: 82mm tall
Like this model? Click here to check out the rest of our collection from Cast n Play
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Cast n Play
@CastnPlay
If you would like to follow or support this artist, please check out the links below.
patreon.com/CastnPlay
instagram.com/CastnPlay
myminifactory.com/users/CastnPlay
facebook.com/CastnPlayMinis
youtube.com/castnplay
![Chow Chow](http://resinclad.com/cdn/shop/files/CHOWCHOW_375x.png?v=1689364889 375w,//resinclad.com/cdn/shop/files/CHOWCHOW_410x.png?v=1689364889 410w,//resinclad.com/cdn/shop/files/CHOWCHOW_520x.png?v=1689364889 520w,//resinclad.com/cdn/shop/files/CHOWCHOW_576x.png?v=1689364889 576w,//resinclad.com/cdn/shop/files/CHOWCHOW_768x.png?v=1689364889 768w,//resinclad.com/cdn/shop/files/CHOWCHOW_992x.png?v=1689364889 992w,//resinclad.com/cdn/shop/files/CHOWCHOW_1024x.png?v=1689364889 1024w,//resinclad.com/cdn/shop/files/CHOWCHOW_1280x.png?v=1689364889 1280w)
Chow Chow
$5.99
32mm Scale
Approximate Size: 28.5mm x 15.5mm x 22mm
Base not included
Like this model? Click here to check out the rest of our collection from 3DIPStudios
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
3DIPStudios
@3DIPStudios
If you would like to follow or support this artist, please check out the link below.
instagram.com/3dipstudios
![Cocker Spaniel](http://resinclad.com/cdn/shop/files/resize-cocker_375x.jpg?v=1689364528 375w,//resinclad.com/cdn/shop/files/resize-cocker_410x.jpg?v=1689364528 410w,//resinclad.com/cdn/shop/files/resize-cocker_520x.jpg?v=1689364528 520w,//resinclad.com/cdn/shop/files/resize-cocker_576x.jpg?v=1689364528 576w,//resinclad.com/cdn/shop/files/resize-cocker_768x.jpg?v=1689364528 768w,//resinclad.com/cdn/shop/files/resize-cocker_992x.jpg?v=1689364528 992w,//resinclad.com/cdn/shop/files/resize-cocker_1024x.jpg?v=1689364528 1024w,//resinclad.com/cdn/shop/files/resize-cocker_1280x.jpg?v=1689364528 1280w)
Cocker Spaniel
$3.49
32mm Scale
Approximate Size: 25mm x 10mm x 18.5mm
Base not included
Like this model? Click here to check out the rest of our collection from 3DIPStudios
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
3DIPStudios
@3DIPStudios
If you would like to follow or support this artist, please check out the link below.
instagram.com/3dipstudios
![Corgi Ranger Bundle](http://resinclad.com/cdn/shop/files/resize-corgirangerbundle_375x.jpg?v=1692368653 375w,//resinclad.com/cdn/shop/files/resize-corgirangerbundle_410x.jpg?v=1692368653 410w,//resinclad.com/cdn/shop/files/resize-corgirangerbundle_520x.jpg?v=1692368653 520w,//resinclad.com/cdn/shop/files/resize-corgirangerbundle_576x.jpg?v=1692368653 576w,//resinclad.com/cdn/shop/files/resize-corgirangerbundle_768x.jpg?v=1692368653 768w,//resinclad.com/cdn/shop/files/resize-corgirangerbundle_992x.jpg?v=1692368653 992w,//resinclad.com/cdn/shop/files/resize-corgirangerbundle_1024x.jpg?v=1692368653 1024w,//resinclad.com/cdn/shop/files/resize-corgirangerbundle_1280x.jpg?v=1692368653 1280w)
![Corgi Ranger Bundle](http://resinclad.com/cdn/shop/files/CorgiRanger1_375x.png?v=1692368657 375w,//resinclad.com/cdn/shop/files/CorgiRanger1_410x.png?v=1692368657 410w,//resinclad.com/cdn/shop/files/CorgiRanger1_520x.png?v=1692368657 520w,//resinclad.com/cdn/shop/files/CorgiRanger1_576x.png?v=1692368657 576w,//resinclad.com/cdn/shop/files/CorgiRanger1_768x.png?v=1692368657 768w,//resinclad.com/cdn/shop/files/CorgiRanger1_992x.png?v=1692368657 992w,//resinclad.com/cdn/shop/files/CorgiRanger1_1024x.png?v=1692368657 1024w,//resinclad.com/cdn/shop/files/CorgiRanger1_1280x.png?v=1692368657 1280w)
Corgi Ranger Bundle
from $5.99
Base Size: 25mm
Base Style: Pier Base
Comes in 32mm scale
Bundle includes all 3 models
Like this model? Click here to check out the rest of our collection from Goon Master Games
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Goon Master Games
@GoonMasterGames
If you would like to follow or support this artist, please check out the links below.
patreon.com/GoonMasterGames
instagram.com/GoonMasterGames
myminifactory.com/users/GoonMasterGames
![Dachshund](http://resinclad.com/cdn/shop/files/DACHSHUND_375x.png?v=1689364415 375w,//resinclad.com/cdn/shop/files/DACHSHUND_410x.png?v=1689364415 410w,//resinclad.com/cdn/shop/files/DACHSHUND_520x.png?v=1689364415 520w,//resinclad.com/cdn/shop/files/DACHSHUND_576x.png?v=1689364415 576w,//resinclad.com/cdn/shop/files/DACHSHUND_768x.png?v=1689364415 768w,//resinclad.com/cdn/shop/files/DACHSHUND_992x.png?v=1689364415 992w,//resinclad.com/cdn/shop/files/DACHSHUND_1024x.png?v=1689364415 1024w,//resinclad.com/cdn/shop/files/DACHSHUND_1280x.png?v=1689364415 1280w)
Dachshund
$4.49
32mm Scale
Approximate Size: 30mm x 9mm x 15mm
Base not included
Like this model? Click here to check out the rest of our collection from 3DIPStudios
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
3DIPStudios
@3DIPStudios
If you would like to follow or support this artist, please check out the link below.
instagram.com/3dipstudios
![Dalmatian](http://resinclad.com/cdn/shop/files/resize-dalmatian_375x.jpg?v=1689364291 375w,//resinclad.com/cdn/shop/files/resize-dalmatian_410x.jpg?v=1689364291 410w,//resinclad.com/cdn/shop/files/resize-dalmatian_520x.jpg?v=1689364291 520w,//resinclad.com/cdn/shop/files/resize-dalmatian_576x.jpg?v=1689364291 576w,//resinclad.com/cdn/shop/files/resize-dalmatian_768x.jpg?v=1689364291 768w,//resinclad.com/cdn/shop/files/resize-dalmatian_992x.jpg?v=1689364291 992w,//resinclad.com/cdn/shop/files/resize-dalmatian_1024x.jpg?v=1689364291 1024w,//resinclad.com/cdn/shop/files/resize-dalmatian_1280x.jpg?v=1689364291 1280w)
Dalmatian
$4.49
32mm Scale
Approximate Size: 34.5mm x 7.5mm x 16mm
Base not included
Like this model? Click here to check out the rest of our collection from 3DIPStudios
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
3DIPStudios
@3DIPStudios
If you would like to follow or support this artist, please check out the link below.
instagram.com/3dipstudios
![Dragon - Chompy](http://resinclad.com/cdn/shop/products/720X720-petdragon1-1_375x.jpg?v=1624158631 375w,//resinclad.com/cdn/shop/products/720X720-petdragon1-1_410x.jpg?v=1624158631 410w,//resinclad.com/cdn/shop/products/720X720-petdragon1-1_520x.jpg?v=1624158631 520w,//resinclad.com/cdn/shop/products/720X720-petdragon1-1_576x.jpg?v=1624158631 576w,//resinclad.com/cdn/shop/products/720X720-petdragon1-1_768x.jpg?v=1624158631 768w,//resinclad.com/cdn/shop/products/720X720-petdragon1-1_992x.jpg?v=1624158631 992w,//resinclad.com/cdn/shop/products/720X720-petdragon1-1_1024x.jpg?v=1624158631 1024w,//resinclad.com/cdn/shop/products/720X720-petdragon1-1_1280x.jpg?v=1624158631 1280w)
Dragon - Chompy
from $5.99
Base Size: 35mm
Base Style: Coin Piles
Like this model? Click here to check out the rest of our collection from Goon Master Games
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC. is a licensed distributor of these 3D prints designed by:
Goon Master Games
@GoonMasterGames
If you would like to follow or support this artist, please check out the links below.
patreon.com/GoonMasterGames
instagram.com/GoonMasterGames
myminifactory.com/users/GoonMasterGames
![Dragon - Glom](http://resinclad.com/cdn/shop/products/720X720-petdragon3-1_375x.jpg?v=1624158634 375w,//resinclad.com/cdn/shop/products/720X720-petdragon3-1_410x.jpg?v=1624158634 410w,//resinclad.com/cdn/shop/products/720X720-petdragon3-1_520x.jpg?v=1624158634 520w,//resinclad.com/cdn/shop/products/720X720-petdragon3-1_576x.jpg?v=1624158634 576w,//resinclad.com/cdn/shop/products/720X720-petdragon3-1_768x.jpg?v=1624158634 768w,//resinclad.com/cdn/shop/products/720X720-petdragon3-1_992x.jpg?v=1624158634 992w,//resinclad.com/cdn/shop/products/720X720-petdragon3-1_1024x.jpg?v=1624158634 1024w,//resinclad.com/cdn/shop/products/720X720-petdragon3-1_1280x.jpg?v=1624158634 1280w)
![Dragon - Glom](http://resinclad.com/cdn/shop/products/20210816_131050_375x.jpg?v=1629306593 375w,//resinclad.com/cdn/shop/products/20210816_131050_410x.jpg?v=1629306593 410w,//resinclad.com/cdn/shop/products/20210816_131050_520x.jpg?v=1629306593 520w,//resinclad.com/cdn/shop/products/20210816_131050_576x.jpg?v=1629306593 576w,//resinclad.com/cdn/shop/products/20210816_131050_768x.jpg?v=1629306593 768w,//resinclad.com/cdn/shop/products/20210816_131050_992x.jpg?v=1629306593 992w,//resinclad.com/cdn/shop/products/20210816_131050_1024x.jpg?v=1629306593 1024w,//resinclad.com/cdn/shop/products/20210816_131050_1280x.jpg?v=1629306593 1280w)
Dragon - Glom
from $6.99
Base Size: 50mm
Base Style: Coin Piles
Like this model? Click here to check out the rest of our collection from Goon Master Games
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC. is a licensed distributor of these 3D prints designed by:
Goon Master Games
@GoonMasterGames
If you would like to follow or support this artist, please check out the links below.
patreon.com/GoonMasterGames
instagram.com/GoonMasterGames
myminifactory.com/users/GoonMasterGames
![Dragon - Snoot](http://resinclad.com/cdn/shop/products/720X720-petdragon2-2_375x.jpg?v=1624158633 375w,//resinclad.com/cdn/shop/products/720X720-petdragon2-2_410x.jpg?v=1624158633 410w,//resinclad.com/cdn/shop/products/720X720-petdragon2-2_520x.jpg?v=1624158633 520w,//resinclad.com/cdn/shop/products/720X720-petdragon2-2_576x.jpg?v=1624158633 576w,//resinclad.com/cdn/shop/products/720X720-petdragon2-2_768x.jpg?v=1624158633 768w,//resinclad.com/cdn/shop/products/720X720-petdragon2-2_992x.jpg?v=1624158633 992w,//resinclad.com/cdn/shop/products/720X720-petdragon2-2_1024x.jpg?v=1624158633 1024w,//resinclad.com/cdn/shop/products/720X720-petdragon2-2_1280x.jpg?v=1624158633 1280w)
![Dragon - Snoot](http://resinclad.com/cdn/shop/products/20210816_131024_375x.jpg?v=1629306526 375w,//resinclad.com/cdn/shop/products/20210816_131024_410x.jpg?v=1629306526 410w,//resinclad.com/cdn/shop/products/20210816_131024_520x.jpg?v=1629306526 520w,//resinclad.com/cdn/shop/products/20210816_131024_576x.jpg?v=1629306526 576w,//resinclad.com/cdn/shop/products/20210816_131024_768x.jpg?v=1629306526 768w,//resinclad.com/cdn/shop/products/20210816_131024_992x.jpg?v=1629306526 992w,//resinclad.com/cdn/shop/products/20210816_131024_1024x.jpg?v=1629306526 1024w,//resinclad.com/cdn/shop/products/20210816_131024_1280x.jpg?v=1629306526 1280w)
Dragon - Snoot
from $7.49
Base Size: 50mm
Base Style: Coin Piles
Like this model? Click here to check out the rest of our collection from Goon Master Games
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC. is a licensed distributor of these 3D prints designed by:
Goon Master Games
@GoonMasterGames
If you would like to follow or support this artist, please check out the links below.
patreon.com/GoonMasterGames
instagram.com/GoonMasterGames
myminifactory.com/users/GoonMasterGames
![Great Dane](http://resinclad.com/cdn/shop/files/GREATDANE_375x.png?v=1689363311 375w,//resinclad.com/cdn/shop/files/GREATDANE_410x.png?v=1689363311 410w,//resinclad.com/cdn/shop/files/GREATDANE_520x.png?v=1689363311 520w,//resinclad.com/cdn/shop/files/GREATDANE_576x.png?v=1689363311 576w,//resinclad.com/cdn/shop/files/GREATDANE_768x.png?v=1689363311 768w,//resinclad.com/cdn/shop/files/GREATDANE_992x.png?v=1689363311 992w,//resinclad.com/cdn/shop/files/GREATDANE_1024x.png?v=1689363311 1024w,//resinclad.com/cdn/shop/files/GREATDANE_1280x.png?v=1689363311 1280w)
Great Dane
$5.99
32mm Scale
Approximate Size: 33.5mm x 11.5mm x 25mm
Base not included
Like this model? Click here to check out the rest of our collection from 3DIPStudios
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
3DIPStudios
@3DIPStudios
If you would like to follow or support this artist, please check out the link below.
instagram.com/3dipstudios
![Horse Bundle 2](http://resinclad.com/cdn/shop/files/HorseBundle_375x.png?v=1689259095 375w,//resinclad.com/cdn/shop/files/HorseBundle_410x.png?v=1689259095 410w,//resinclad.com/cdn/shop/files/HorseBundle_520x.png?v=1689259095 520w,//resinclad.com/cdn/shop/files/HorseBundle_576x.png?v=1689259095 576w,//resinclad.com/cdn/shop/files/HorseBundle_768x.png?v=1689259095 768w,//resinclad.com/cdn/shop/files/HorseBundle_992x.png?v=1689259095 992w,//resinclad.com/cdn/shop/files/HorseBundle_1024x.png?v=1689259095 1024w,//resinclad.com/cdn/shop/files/HorseBundle_1280x.png?v=1689259095 1280w)
![Horse Bundle 2](http://resinclad.com/cdn/shop/files/HORSE_375x.png?v=1689259097 375w,//resinclad.com/cdn/shop/files/HORSE_410x.png?v=1689259097 410w,//resinclad.com/cdn/shop/files/HORSE_520x.png?v=1689259097 520w,//resinclad.com/cdn/shop/files/HORSE_576x.png?v=1689259097 576w,//resinclad.com/cdn/shop/files/HORSE_768x.png?v=1689259097 768w,//resinclad.com/cdn/shop/files/HORSE_992x.png?v=1689259097 992w,//resinclad.com/cdn/shop/files/HORSE_1024x.png?v=1689259097 1024w,//resinclad.com/cdn/shop/files/HORSE_1280x.png?v=1689259097 1280w)
Horse Bundle 2
from $8.99
32mm ScaleSize:
Horse V1 - 45.5mm x 26.5mm x 40mm
Horse V2 - 44mm x 14.5mm x 53mm
Base not included
Bundle includes both models
Like this model? Click here to check out the rest of our collection from 3DIPStudios
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
3DIPStudios
@3DIPStudios
If you would like to follow or support this artist, please check out the link below.
instagram.com/3dipstudios
![Larsael the Lightning](http://resinclad.com/cdn/shop/products/LarsaeltheLightning_375x.jpg?v=1670006717 375w,//resinclad.com/cdn/shop/products/LarsaeltheLightning_410x.jpg?v=1670006717 410w,//resinclad.com/cdn/shop/products/LarsaeltheLightning_520x.jpg?v=1670006717 520w,//resinclad.com/cdn/shop/products/LarsaeltheLightning_576x.jpg?v=1670006717 576w,//resinclad.com/cdn/shop/products/LarsaeltheLightning_768x.jpg?v=1670006717 768w,//resinclad.com/cdn/shop/products/LarsaeltheLightning_992x.jpg?v=1670006717 992w,//resinclad.com/cdn/shop/products/LarsaeltheLightning_1024x.jpg?v=1670006717 1024w,//resinclad.com/cdn/shop/products/LarsaeltheLightning_1280x.jpg?v=1670006717 1280w)
Larsael the Lightning
from $11.99
Comes in 32mm or 75mm scale
Base Style: Specialized
Like this model? Click here to check out the rest of our collection from White Werewolf Tavern
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
White Werewolf Tavern
@WWTavern
If you would like to follow or support this artist, please check out the links below.
patreon.com/whitewerewolftavern
www.instagram.com/wwtavern
myminifactory.com/users/WWTavern
facebook.com/miniatures3d
twitter.com/tavernww
![Maeva and Crocodile](http://resinclad.com/cdn/shop/products/MaevaFront_375x.jpg?v=1660072124 375w,//resinclad.com/cdn/shop/products/MaevaFront_410x.jpg?v=1660072124 410w,//resinclad.com/cdn/shop/products/MaevaFront_520x.jpg?v=1660072124 520w,//resinclad.com/cdn/shop/products/MaevaFront_576x.jpg?v=1660072124 576w,//resinclad.com/cdn/shop/products/MaevaFront_768x.jpg?v=1660072124 768w,//resinclad.com/cdn/shop/products/MaevaFront_992x.jpg?v=1660072124 992w,//resinclad.com/cdn/shop/products/MaevaFront_1024x.jpg?v=1660072124 1024w,//resinclad.com/cdn/shop/products/MaevaFront_1280x.jpg?v=1660072124 1280w)
![Maeva and Crocodile](http://resinclad.com/cdn/shop/products/MaevaBack_375x.jpg?v=1660072127 375w,//resinclad.com/cdn/shop/products/MaevaBack_410x.jpg?v=1660072127 410w,//resinclad.com/cdn/shop/products/MaevaBack_520x.jpg?v=1660072127 520w,//resinclad.com/cdn/shop/products/MaevaBack_576x.jpg?v=1660072127 576w,//resinclad.com/cdn/shop/products/MaevaBack_768x.jpg?v=1660072127 768w,//resinclad.com/cdn/shop/products/MaevaBack_992x.jpg?v=1660072127 992w,//resinclad.com/cdn/shop/products/MaevaBack_1024x.jpg?v=1660072127 1024w,//resinclad.com/cdn/shop/products/MaevaBack_1280x.jpg?v=1660072127 1280w)
Maeva and Crocodile
from $14.99
Base Size: 65mm
Base Style: City Streets
Like this model? Click here to check out the rest of our collection from Galaad Miniatures
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Galaad Miniatures
@GalaadMiniatures
If you would like to follow or support this artist, please check out the links below.
patreon.com/galaad
facebook.com/galaadminiatures
instagram.com/galaad_miniatures
myminifactory.com/users/galaad
![Nar](http://resinclad.com/cdn/shop/products/Nar_CastNPlay_375x.png?v=1647372046 375w,//resinclad.com/cdn/shop/products/Nar_CastNPlay_410x.png?v=1647372046 410w,//resinclad.com/cdn/shop/products/Nar_CastNPlay_520x.png?v=1647372046 520w,//resinclad.com/cdn/shop/products/Nar_CastNPlay_576x.png?v=1647372046 576w,//resinclad.com/cdn/shop/products/Nar_CastNPlay_768x.png?v=1647372046 768w,//resinclad.com/cdn/shop/products/Nar_CastNPlay_992x.png?v=1647372046 992w,//resinclad.com/cdn/shop/products/Nar_CastNPlay_1024x.png?v=1647372046 1024w,//resinclad.com/cdn/shop/products/Nar_CastNPlay_1280x.png?v=1647372046 1280w)
![Nar](http://resinclad.com/cdn/shop/products/BA_Nar_375x.png?v=1647372048 375w,//resinclad.com/cdn/shop/products/BA_Nar_410x.png?v=1647372048 410w,//resinclad.com/cdn/shop/products/BA_Nar_520x.png?v=1647372048 520w,//resinclad.com/cdn/shop/products/BA_Nar_576x.png?v=1647372048 576w,//resinclad.com/cdn/shop/products/BA_Nar_768x.png?v=1647372048 768w,//resinclad.com/cdn/shop/products/BA_Nar_992x.png?v=1647372048 992w,//resinclad.com/cdn/shop/products/BA_Nar_1024x.png?v=1647372048 1024w,//resinclad.com/cdn/shop/products/BA_Nar_1280x.png?v=1647372048 1280w)
Nar
from $7.99
Base Size: 35mm
Base Style: Uru-Can Base - Hero
Like this model? Click here to check out the rest of our collection from Cast n Play
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Cast n Play
@CastnPlay
If you would like to follow or support this artist, please check out the links below.
patreon.com/CastnPlay
instagram.com/CastnPlay
myminifactory.com/users/CastnPlay
facebook.com/CastnPlayMinis
youtube.com/castnplay
![Orc Prowler Dragon Rider / Prowler Dragon](http://resinclad.com/cdn/shop/products/720X720-orcprowlerrider1_375x.jpg?v=1624158830 375w,//resinclad.com/cdn/shop/products/720X720-orcprowlerrider1_410x.jpg?v=1624158830 410w,//resinclad.com/cdn/shop/products/720X720-orcprowlerrider1_520x.jpg?v=1624158830 520w,//resinclad.com/cdn/shop/products/720X720-orcprowlerrider1_576x.jpg?v=1624158830 576w,//resinclad.com/cdn/shop/products/720X720-orcprowlerrider1_768x.jpg?v=1624158830 768w,//resinclad.com/cdn/shop/products/720X720-orcprowlerrider1_992x.jpg?v=1624158830 992w,//resinclad.com/cdn/shop/products/720X720-orcprowlerrider1_1024x.jpg?v=1624158830 1024w,//resinclad.com/cdn/shop/products/720X720-orcprowlerrider1_1280x.jpg?v=1624158830 1280w)
![Orc Prowler Dragon Rider / Prowler Dragon](http://resinclad.com/cdn/shop/products/720X720-prowler2_375x.jpg?v=1624158830 375w,//resinclad.com/cdn/shop/products/720X720-prowler2_410x.jpg?v=1624158830 410w,//resinclad.com/cdn/shop/products/720X720-prowler2_520x.jpg?v=1624158830 520w,//resinclad.com/cdn/shop/products/720X720-prowler2_576x.jpg?v=1624158830 576w,//resinclad.com/cdn/shop/products/720X720-prowler2_768x.jpg?v=1624158830 768w,//resinclad.com/cdn/shop/products/720X720-prowler2_992x.jpg?v=1624158830 992w,//resinclad.com/cdn/shop/products/720X720-prowler2_1024x.jpg?v=1624158830 1024w,//resinclad.com/cdn/shop/products/720X720-prowler2_1280x.jpg?v=1624158830 1280w)
Orc Prowler Dragon Rider / Prowler Dragon
$16.99
Dragon Size: 96mm x 98mm x 54.5mm
Like this model? Click here to check out the rest of our collection from Goon Master Games
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC. is a licensed distributor of these 3D prints designed by:
Goon Master Games
@GoonMasterGames
If you would like to follow or support this artist, please check out the links below.
patreon.com/GoonMasterGames
instagram.com/GoonMasterGames
myminifactory.com/users/GoonMasterGames
![OwlBear Mount](http://resinclad.com/cdn/shop/products/720x720-owlbearmount-1_375x.jpg?v=1624158583 375w,//resinclad.com/cdn/shop/products/720x720-owlbearmount-1_410x.jpg?v=1624158583 410w,//resinclad.com/cdn/shop/products/720x720-owlbearmount-1_520x.jpg?v=1624158583 520w,//resinclad.com/cdn/shop/products/720x720-owlbearmount-1_576x.jpg?v=1624158583 576w,//resinclad.com/cdn/shop/products/720x720-owlbearmount-1_768x.jpg?v=1624158583 768w,//resinclad.com/cdn/shop/products/720x720-owlbearmount-1_992x.jpg?v=1624158583 992w,//resinclad.com/cdn/shop/products/720x720-owlbearmount-1_1024x.jpg?v=1624158583 1024w,//resinclad.com/cdn/shop/products/720x720-owlbearmount-1_1280x.jpg?v=1624158583 1280w)
OwlBear Mount
from $5.99
Base Size: 35mm
Base Style: Leafy
Like this model? Click here to check out the rest of our collection from Goon Master Games
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC. is a licensed distributor of these 3D prints designed by:
Goon Master Games
@GoonMasterGames
If you would like to follow or support this artist, please check out the links below.
patreon.com/GoonMasterGames
instagram.com/GoonMasterGames
myminifactory.com/users/GoonMasterGames
![Pit Bull Bundle](http://resinclad.com/cdn/shop/files/pitbullbundle_375x.jpg?v=1689181028 375w,//resinclad.com/cdn/shop/files/pitbullbundle_410x.jpg?v=1689181028 410w,//resinclad.com/cdn/shop/files/pitbullbundle_520x.jpg?v=1689181028 520w,//resinclad.com/cdn/shop/files/pitbullbundle_576x.jpg?v=1689181028 576w,//resinclad.com/cdn/shop/files/pitbullbundle_768x.jpg?v=1689181028 768w,//resinclad.com/cdn/shop/files/pitbullbundle_992x.jpg?v=1689181028 992w,//resinclad.com/cdn/shop/files/pitbullbundle_1024x.jpg?v=1689181028 1024w,//resinclad.com/cdn/shop/files/pitbullbundle_1280x.jpg?v=1689181028 1280w)
![Pit Bull Bundle](http://resinclad.com/cdn/shop/files/720X720-pit-bull_375x.jpg?v=1689181029 375w,//resinclad.com/cdn/shop/files/720X720-pit-bull_410x.jpg?v=1689181029 410w,//resinclad.com/cdn/shop/files/720X720-pit-bull_520x.jpg?v=1689181029 520w,//resinclad.com/cdn/shop/files/720X720-pit-bull_576x.jpg?v=1689181029 576w,//resinclad.com/cdn/shop/files/720X720-pit-bull_768x.jpg?v=1689181029 768w,//resinclad.com/cdn/shop/files/720X720-pit-bull_992x.jpg?v=1689181029 992w,//resinclad.com/cdn/shop/files/720X720-pit-bull_1024x.jpg?v=1689181029 1024w,//resinclad.com/cdn/shop/files/720X720-pit-bull_1280x.jpg?v=1689181029 1280w)
Pit Bull Bundle
from $4.49
32mm ScaleSize:
Pit Bull V1 - 25.5mm x 18.5mm x 23mm
Pit Bull V2 - 30mm x 21mm x 21.5mm
Base not included
Bundle includes both models
Like this model? Click here to check out the rest of our collection from 3DIPStudios
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
3DIPStudios
@3DIPStudios
If you would like to follow or support this artist, please check out the link below.
instagram.com/3dipstudios
![Poodle](http://resinclad.com/cdn/shop/files/POODLE_375x.png?v=1689360307 375w,//resinclad.com/cdn/shop/files/POODLE_410x.png?v=1689360307 410w,//resinclad.com/cdn/shop/files/POODLE_520x.png?v=1689360307 520w,//resinclad.com/cdn/shop/files/POODLE_576x.png?v=1689360307 576w,//resinclad.com/cdn/shop/files/POODLE_768x.png?v=1689360307 768w,//resinclad.com/cdn/shop/files/POODLE_992x.png?v=1689360307 992w,//resinclad.com/cdn/shop/files/POODLE_1024x.png?v=1689360307 1024w,//resinclad.com/cdn/shop/files/POODLE_1280x.png?v=1689360307 1280w)
Poodle
$4.99
32mm Scale
Approximate Size: 28.5mm x 10mm x 23.5mm
Base not included
Like this model? Click here to check out the rest of our collection from 3DIPStudios
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
3DIPStudios
@3DIPStudios
If you would like to follow or support this artist, please check out the link below.
instagram.com/3dipstudios
![Protection Dogs](http://resinclad.com/cdn/shop/products/473_ProtectionDogs_375x.jpg?v=1648227636 375w,//resinclad.com/cdn/shop/products/473_ProtectionDogs_410x.jpg?v=1648227636 410w,//resinclad.com/cdn/shop/products/473_ProtectionDogs_520x.jpg?v=1648227636 520w,//resinclad.com/cdn/shop/products/473_ProtectionDogs_576x.jpg?v=1648227636 576w,//resinclad.com/cdn/shop/products/473_ProtectionDogs_768x.jpg?v=1648227636 768w,//resinclad.com/cdn/shop/products/473_ProtectionDogs_992x.jpg?v=1648227636 992w,//resinclad.com/cdn/shop/products/473_ProtectionDogs_1024x.jpg?v=1648227636 1024w,//resinclad.com/cdn/shop/products/473_ProtectionDogs_1280x.jpg?v=1648227636 1280w)
Protection Dogs
from $5.99
Base Size: 35mm
Base Style: Verdant Hideout Base - Round
Bundle includes all 3 models
Like this model? Click here to check out the rest of our collection from Cast n Play
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Cast n Play
@CastnPlay
If you would like to follow or support this artist, please check out the links below.
patreon.com/CastnPlay
instagram.com/CastnPlay
myminifactory.com/users/CastnPlay
facebook.com/CastnPlayMinis
youtube.com/castnplay
![Retriever](http://resinclad.com/cdn/shop/files/resize-retrivier_375x.jpg?v=1689350789 375w,//resinclad.com/cdn/shop/files/resize-retrivier_410x.jpg?v=1689350789 410w,//resinclad.com/cdn/shop/files/resize-retrivier_520x.jpg?v=1689350789 520w,//resinclad.com/cdn/shop/files/resize-retrivier_576x.jpg?v=1689350789 576w,//resinclad.com/cdn/shop/files/resize-retrivier_768x.jpg?v=1689350789 768w,//resinclad.com/cdn/shop/files/resize-retrivier_992x.jpg?v=1689350789 992w,//resinclad.com/cdn/shop/files/resize-retrivier_1024x.jpg?v=1689350789 1024w,//resinclad.com/cdn/shop/files/resize-retrivier_1280x.jpg?v=1689350789 1280w)
Retriever
$5.49
32mm Scale
Approximate Size: 34mm x 12mm x 22.5mm
Base not included
Like this model? Click here to check out the rest of our collection from 3DIPStudios
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
3DIPStudios
@3DIPStudios
If you would like to follow or support this artist, please check out the link below.
instagram.com/3dipstudios
![Rottweiler Bundle](http://resinclad.com/cdn/shop/files/rottweilerbundle_375x.jpg?v=1689180602 375w,//resinclad.com/cdn/shop/files/rottweilerbundle_410x.jpg?v=1689180602 410w,//resinclad.com/cdn/shop/files/rottweilerbundle_520x.jpg?v=1689180602 520w,//resinclad.com/cdn/shop/files/rottweilerbundle_576x.jpg?v=1689180602 576w,//resinclad.com/cdn/shop/files/rottweilerbundle_768x.jpg?v=1689180602 768w,//resinclad.com/cdn/shop/files/rottweilerbundle_992x.jpg?v=1689180602 992w,//resinclad.com/cdn/shop/files/rottweilerbundle_1024x.jpg?v=1689180602 1024w,//resinclad.com/cdn/shop/files/rottweilerbundle_1280x.jpg?v=1689180602 1280w)
![Rottweiler Bundle](http://resinclad.com/cdn/shop/files/720X720-rottweiler_375x.jpg?v=1689180605 375w,//resinclad.com/cdn/shop/files/720X720-rottweiler_410x.jpg?v=1689180605 410w,//resinclad.com/cdn/shop/files/720X720-rottweiler_520x.jpg?v=1689180605 520w,//resinclad.com/cdn/shop/files/720X720-rottweiler_576x.jpg?v=1689180605 576w,//resinclad.com/cdn/shop/files/720X720-rottweiler_768x.jpg?v=1689180605 768w,//resinclad.com/cdn/shop/files/720X720-rottweiler_992x.jpg?v=1689180605 992w,//resinclad.com/cdn/shop/files/720X720-rottweiler_1024x.jpg?v=1689180605 1024w,//resinclad.com/cdn/shop/files/720X720-rottweiler_1280x.jpg?v=1689180605 1280w)
Rottweiler Bundle
from $4.49
32mm ScaleSize:
Rottweiler V1 - 25mm x 17mm x 21.5mm
Rottweiler V2 - 29.5mm x 14mm x 21.5mm
Base not included
Bundle includes both models
Like this model? Click here to check out the rest of our collection from 3DIPStudios
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
3DIPStudios
@3DIPStudios
If you would like to follow or support this artist, please check out the link below.
instagram.com/3dipstudios