Products

Approximate size: Gromok The War Tyrant - A - 55.5mm x 45mm x 73.5mm Gromok The War Tyrant - B - 59mm x 50mm x 73.5mm Base Info: Ork - 35mmComes in 32mm scaleBundle includes both modelsLike this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Base Info: Ork - 140mmComes in 32mm scaleModel requires assemblyLike this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Like this model? Click here to check out the rest of our collection from Goon Master Games   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Goon Master Games @GoonMasterGames If you would like to follow or support this artist, please check out the links below. patreon.com/GoonMasterGames instagram.com/GoonMasterGames myminifactory.com/users/GoonMasterGames

Approximate size: Hylta Qycine - Turning - 32mm x 24.5mm x 35.5mm Hylta Qycine - Holding On - 38.5mm x 26mm x 41.5mm Base Info: Elven Grove - 25mmComes in 32mm scaleBundle includes both modelsLike this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Krossos - 18mm x 12.5mm x 36.5mm Zagan - 27.54mm x 17mm x 38.5mm Base Info: Mennesker - 25mmComes in 32mm scaleLike this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

  Like this model? Click here to check out the rest of our collection from White Werewolf Tavern   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: White Werewolf Tavern @WWTavern If you would like to follow or support this artist, please check out the links below. patreon.com/whitewerewolftavern www.instagram.com/wwtavern myminifactory.com/users/WWTavern facebook.com/miniatures3d twitter.com/tavernww

Approximate size: Dremek - 39.5mm x 32mm x 38.5mm Kyros - 22mm x 16.5mm x 40.5mm Roland - 27.5mm x 18.5mm x 31mm Ruangor - 29mm x 22.5mm x 47mm Vorlach - 20.5mm x 22mm x 37.5mm Base Info: Dremek - 30mm - Mennesker Kyros - 25mm - Mennesker Roland - 30mm - Mennesker Ruangor - 30mm - Mennesker Vorlach - 25mm - Mennesker Comes in 32mm scaleLike this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: "No Tongue" Savana - 28mm x 19mm x 35mm "Secrets" Leonder - 22mm x 17mm x 28mm "Typhoon" Harry - 28mm x 28.5mm x 36mm Xandras - 21.5mm x 16.5mm x 37.5mm Base Info: Mennesker - 25mmComes in 32mm scaleLike this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Moonflower Elven Archer - Eletha - 24mm x 20mm x 44.5mm Moonflower Elven Archer - Mylenna - 29mm x 30.5mm x 34mm Moonflower Elven Archer - Mireille - 34.5mm x 29.5mm x 34.5mm Base Info: Elven Grove - 25mmComes in 32mm scaleBundle includes all 3 modelsLike this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Like this model? Click here to check out the rest of our collection from Goon Master Games   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Goon Master Games @GoonMasterGames If you would like to follow or support this artist, please check out the links below. patreon.com/GoonMasterGames instagram.com/GoonMasterGames myminifactory.com/users/GoonMasterGames

Like this model? Click here to check out the rest of our collection from White Werewolf Tavern   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: White Werewolf Tavern @WWTavern If you would like to follow or support this artist, please check out the links below. patreon.com/whitewerewolftavern www.instagram.com/wwtavern myminifactory.com/users/WWTavern facebook.com/miniatures3d twitter.com/tavernww

Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Ork Gretchin - A - 25.5mm x 14mm x 25.5mm Ork Gretchin - B - 25mm x 27.5mm x 26.5mm Ork Gretchin - C - 30.5mm x 31.5mm x 20.5mm Ork Gretchin - D - 41.5mm x 26.5mm x 30.5mm Ork Gretchin - E - 24.5mm x 18.5mm x 30mm Ork Gretchin - F - 28.5mm x 24mm x 26.5mm Ork Gretchin - G - 30.5mm x 36mm x 27.5mm Ork Gretchin - H - 22.5mm x 15.5mm x 35.5mm Base Info: Ork - 25mmComes in 32mm scaleBundle includes all 8 modelsLike this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Ork Grunt - A - 44.5mm x 27.5mm x 50mm Ork Grunt - B - 43.5mm x 35.5mm x 35.5mm Ork Grunt - C - 39mm x 21mm x 45.5mm Ork Grunt - D - 41mm x 35.5mm x 39.5mm Base Info: Ork - 25mmComes in 32mm scaleBundle includes all 4 modelsLike this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Like this model? Click here to check out the rest of our collection from Goon Master Games   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Goon Master Games @GoonMasterGames If you would like to follow or support this artist, please check out the links below. patreon.com/GoonMasterGames instagram.com/GoonMasterGames myminifactory.com/users/GoonMasterGames

  Like this model? Click here to check out the rest of our collection from Galaad Miniatures Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC. is a licensed distributor of these 3D prints designed by: Galaad Miniatures @GalaadMiniatures If you would like to follow or support this artist, please check out the links below. patreon.com/galaad facebook.com/galaadminiatures instagram.com/galaad_miniatures myminifactory.com/users/galaad  

Like this model? Click here to check out the rest of our collection from Goon Master Games   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Goon Master Games @GoonMasterGames If you would like to follow or support this artist, please check out the links below. patreon.com/GoonMasterGames instagram.com/GoonMasterGames myminifactory.com/users/GoonMasterGames

Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Skull Collectors - A - 34mm x 12mm x 35mm Skull Collectors - B - 23.5mm x 32mm x 43mm Skull Collectors - C - 24mm x 21.5mm x 38mm Skull Collectors - D - 18mm x 25mm x 34.5mm Skull Collectors - E - 23mm x 31mm x 36mm Skull Collectors - F - 20.5mm x 35.5mm x 35.5mm Base Info: Ork - 25mmComes in 32mm scaleBundle includes all 6 modelsLike this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Spine Rippers - A - 57.5mm x 25mm x 46mm Spine Rippers - B - 41.5mm x 33mm x 41mm Spine Rippers - C - 61.5mm x 33mm x 57mm Spine Rippers - D - 59.5mm x 31mm x 35mm Spine Rippers - E - 45mm x 51.5mm x 46mm Spine Rippers - F - 48.5mm x 33.5mm x 49mm Base Info: Ork - 35mmComes in 32mm scaleBundle includes all 6 modelsLike this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Like this model? Click here to check out the rest of our collection from Goon Master Games   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Goon Master Games @GoonMasterGames If you would like to follow or support this artist, please check out the links below. patreon.com/GoonMasterGames instagram.com/GoonMasterGames myminifactory.com/users/GoonMasterGames

Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Sunleaf Elven Archer - Erdhan - 50mm x 32mm x 35mm Sunleaf Elven Archer - Heylan - 39mm x 28mm x 33.5mm Sunleaf Elven Archer - Jhaeros - 44mm x 28mm x 44mm Base Info: Elven Grove - 25mmComes in 32mm scaleBundle includes all 3 modelsLike this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Kaspar the Eagle - 32.5mm x 19.5mm x 41mm Marsim the Hound - 19.5mm x 28.5mm x 22.5mm Sir Artjem Praeco - 33mm x 23.5mm x 38mm Base Info: Kaspar the Eagle - 30mm - Mennesker Marsim the Hound - 25mm - Mennesker Sir Artjem Praeco - 30mm - Mennesker Comes in 32mm scaleLike this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay