Products

Base Info: Mire - 20mm - RoundComes in 32mm scaleBundle includes all 5 models  Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Munch - Artisan A - 16.5mm x 11mm x 12mm Munch - Artisan B - 20.5mm x 11mm x 10.5mm Munch - Bare A - 18.5mm x 9mm x 13mm Munch - Bare B - 20mm x 11mm x 7.5mm Munch - Wizard A - 18mm x 11.5mm x 13.5mm Munch - Wizard B - 18.5mm x 9.5mm x 12.5mm Base Info: Munch - Artisan A - 15mm - Water Munch - Artisan B - 15mm - Water Munch - Bare A - 15mm - Water Munch - Bare B - 15mm - Grass and Dirt Munch - Wizard A - 15mm - Grass and Dirt Munch - Wizard B - 15mm - Grass and Dirt Comes in 32mm scale Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Otto - Adventurer A - 18.5mm x 20mm x 18mm Otto - Adventurer B - 17.5mm x 20mm x 21.5mm Otto - Bare A - 17.5mm x 15mm x 18mm Otto - Bare B - 18mm x 23.5mm x 13.5mm Otto - Thief A - 18.5mm x 17.5mm x 20mm Otto - Thief B - 12mm x 32mm x 14mm Base Info: Otto - Adventurer A - 25mm - Grass and Dirt Otto - Adventurer B - 25mm - Grass and Dirt Otto - Bare A - 25mm - Dirt Otto - Bare B - 25mm - Dirt Otto - Thief A - 25mm - Dirt Otto - Thief B - 25mm - Grass and Dirt Comes in 32mm scale Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Penguin Adventurer - 1 - 25.5mm x 25mm x 47.5mm Penguin Adventurer - 2 - 45.5mm x 32.5mm x 30.5mm Penguin Adventurer - 3 - 26mm x 31.5mm x 41.5mm Penguin Adventurer - 4 - 38.5mm x 40mm x 30.5mm Base Info: Rubble Base - 25mm - RoundComes in 32mm scale Bundle includes all 4 modelsLike this model? Click here to check out the rest of our collection from Goon Master Games   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Goon Master Games @GoonMasterGames If you would like to follow or support this artist, please check out the links below. patreon.com/GoonMasterGames instagram.com/GoonMasterGames myminifactory.com/users/GoonMasterGames

Approximate size: Redd - Adventurer A - 16mm x 27mm x 17mm Redd - Adventurer B - 21mm x 21.5mm x 16mm Redd - Bare A - 15.5mm x 29mm x 13mm Redd - Bare B - 20.5mm x 20.5mm x 15mm Redd - Monk A - 15.5mm x 23.5mm x 17mm Redd - Monk B - 19.5mm x 22mm x 19mm Base Info: Redd - Adventurer A - 25mm - Grass Redd - Adventurer B - 25mm - Grass and Dirt Redd - Bare A - 25mm - Grass and Dirt Redd - Bare B - 25mm - Grass Redd - Monk A - 25mm - Grass and Dirt Redd - Monk B - 25mm - Grass Comes in 32mm scale Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Sabus - Bare A - 13.5mm x 23.5mm x 25mm Sabus - Bare B - 20.5mm x 30mm x 16.5mm Sabus - Explorer A - 16mm x 31mm x 24.5mm Sabus - Explorer B - 15.5mm x 31mm x 20mm Sabus - Warrior A - 18.5mm x 27.5mm x 30mm Sabus - Warrior B - 18.5mm x 30.5mm x 25mm Base Info: Sabus - Bare A - 30mm - Wood Sabus - Bare B - 30mm - Wood Sabus - Explorer A - 30mm - Wood Sabus - Explorer B - 30mm - Grass Sabus - Warrior A - 30mm - Grass Sabus - Warrior B - 30mm - Grass Comes in 32mm scale Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Tao - Bare A - 29.5mm x 39mm x 45mm Tao - Bare B - 26.5mm x 26.5mm x 29.5mm Tao - Collector A - 30.5mm x 35mm x 34mm Tao - Collector B - 45.5mm x 26.5mm x 27mm Tao - Explorer A - 28.5mm x 36mm x 31mm Tao - Explorer B - 22.5mm x 38mm x 29.5mm Base Info: Tao - Bare A - 35mm - Grass and Dirt Tao - Bare B - 35mm - Grass Tao - Collector A - 50mm - Grass and Dirt Tao - Collector B - 35mm - Grass Tao - Explorer A - 35mm - Grass and Dirt Tao - Explorer B - 50mm - Grass Comes in 32mm scale Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Arctic Fox A - 26.5mm x 24mm x 32mm Arctic Fox B - 36mm x 17.5mm x 22mm Ferret Messenger - 9mm x 23.5mm x 26mm Ferret Watcher - 15.5mm x 16mm x 27mm Frost Yeti - 43mm x 52mm x 55mm Haulmammoth - 46mm x 83mm x 72.5mm Ice Elk - 32mm x 53.5mm x 58mm Penguin Fisher - 19.5mm x 35.5mm x 32.5mm Penguin Lancer - 17mm x 21.5mm x 32mm Platypus Water Healer - 36.5mm x 29mm x 29mm Platypus Waterbender - 25.5mm x 31.5mm x 26.5mm Polar Bear Frontliner - 55.5mm x 38mm x 47.5mm Polar Bear Striker - 66.5mm x 47.5mm x 36.5mm Polar Bear Vanguard - 51mm x 24mm x 67mm Walrus Fisher - 42mm x 34.5mm x 51.5mm Walrus Hunter - 42mm x 30.5mm x 55.5mm Base Info: Arctic Fox A - Arctic Base - 25mm - Round Arctic Fox B - Arctic Base - 25mm - Round Ferret Messenger - Arctic Base - 25mm - Round Ferret Watcher - Arctic Base - 25mm - Round Frost Yeti - Arctic Base - 50mm - Round Haulmammoth - Arctic Base - 75mm - Round Ice Elk - Arctic Base - 50mm - Round Penguin Fisher - Arctic Base - 25mm - Round Penguin Lancer - Arctic Base - 25mm - Round Platypus Water Healer - Arctic Base - 25mm - Round Platypus Waterbender - Arctic Base - 25mm - Round Polar Bear Frontliner - Arctic Base - 50mm - Round Polar Bear Striker - Arctic Base - 35mm - Round Polar Bear Vanguard - Arctic Base - 35mm - Round Walrus Fisher - Arctic Base - 35mm - Round Walrus Hunter - Arctic Base - 35mm - Round Comes in 32mm scaleBundle includes all 16 modelsLike this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Worlo - Bare A - 38mm x 40.5mm x 26mm Worlo - Bare B - 44.5mm x 32mm x 33mm Worlo - Captain A - 38mm x 37.5mm x 35mm Worlo - Captain B - 45mm x 35mm x 35.5mm Worlo - Explorer A - 37mm x 40.5mm x 33mm Worlo - Explorer B - 44.5mm x 38mm x 32mm Base Info: Worlo - Bare A - 50mm - Ice Worlo - Bare B - 50mm - Sand Worlo - Captain A - 50mm - Sand Worlo - Captain B - 50mm - Sand Worlo - Explorer A - 50mm - Ice Worlo - Explorer B - 50mm - Ice Comes in 32mm scale Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay