![Basing Bits - Alien Succulents](http://resinclad.com/cdn/shop/files/AlienSucculent_375x.png?v=1691438644 375w,//resinclad.com/cdn/shop/files/AlienSucculent_410x.png?v=1691438644 410w,//resinclad.com/cdn/shop/files/AlienSucculent_520x.png?v=1691438644 520w,//resinclad.com/cdn/shop/files/AlienSucculent_576x.png?v=1691438644 576w,//resinclad.com/cdn/shop/files/AlienSucculent_768x.png?v=1691438644 768w,//resinclad.com/cdn/shop/files/AlienSucculent_992x.png?v=1691438644 992w,//resinclad.com/cdn/shop/files/AlienSucculent_1024x.png?v=1691438644 1024w,//resinclad.com/cdn/shop/files/AlienSucculent_1280x.png?v=1691438644 1280w)
Basing Bits - Alien Succulents
$8.99
Basing Bits are designed to add flare to your miniature bases and terrain
Comes in 32mm scale
Includes all 7 models
Like this model? Click here to check out the rest of our collection from Goon Master Games
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Goon Master Games
@GoonMasterGames
If you would like to follow or support this artist, please check out the links below.
patreon.com/GoonMasterGames
instagram.com/GoonMasterGames
myminifactory.com/users/GoonMasterGames
![Basing Bits - Black Trumpet Mushrooms](http://resinclad.com/cdn/shop/files/BlackTrumpetMushrooms_375x.png?v=1691438259 375w,//resinclad.com/cdn/shop/files/BlackTrumpetMushrooms_410x.png?v=1691438259 410w,//resinclad.com/cdn/shop/files/BlackTrumpetMushrooms_520x.png?v=1691438259 520w,//resinclad.com/cdn/shop/files/BlackTrumpetMushrooms_576x.png?v=1691438259 576w,//resinclad.com/cdn/shop/files/BlackTrumpetMushrooms_768x.png?v=1691438259 768w,//resinclad.com/cdn/shop/files/BlackTrumpetMushrooms_992x.png?v=1691438259 992w,//resinclad.com/cdn/shop/files/BlackTrumpetMushrooms_1024x.png?v=1691438259 1024w,//resinclad.com/cdn/shop/files/BlackTrumpetMushrooms_1280x.png?v=1691438259 1280w)
Basing Bits - Black Trumpet Mushrooms
$6.99
Basing Bits are designed to add flare to your miniature bases and terrain
Comes in 32mm scale
Includes all 5 models
Like this model? Click here to check out the rest of our collection from Goon Master Games
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Goon Master Games
@GoonMasterGames
If you would like to follow or support this artist, please check out the links below.
patreon.com/GoonMasterGames
instagram.com/GoonMasterGames
myminifactory.com/users/GoonMasterGames
![Basing Bits - Colus Pusillus Mushrooms](http://resinclad.com/cdn/shop/files/ColusPusillusMushrooms_375x.png?v=1691437989 375w,//resinclad.com/cdn/shop/files/ColusPusillusMushrooms_410x.png?v=1691437989 410w,//resinclad.com/cdn/shop/files/ColusPusillusMushrooms_520x.png?v=1691437989 520w,//resinclad.com/cdn/shop/files/ColusPusillusMushrooms_576x.png?v=1691437989 576w,//resinclad.com/cdn/shop/files/ColusPusillusMushrooms_768x.png?v=1691437989 768w,//resinclad.com/cdn/shop/files/ColusPusillusMushrooms_992x.png?v=1691437989 992w,//resinclad.com/cdn/shop/files/ColusPusillusMushrooms_1024x.png?v=1691437989 1024w,//resinclad.com/cdn/shop/files/ColusPusillusMushrooms_1280x.png?v=1691437989 1280w)
Basing Bits - Colus Pusillus Mushrooms
$6.99
Basing Bits are designed to add flare to your miniature bases and terrain
Comes in 32mm scale
Includes all 5 models
Like this model? Click here to check out the rest of our collection from Goon Master Games
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Goon Master Games
@GoonMasterGames
If you would like to follow or support this artist, please check out the links below.
patreon.com/GoonMasterGames
instagram.com/GoonMasterGames
myminifactory.com/users/GoonMasterGames
![Basing Bits - Devils Tongue Plant](http://resinclad.com/cdn/shop/files/DevilsTonguePlant_375x.png?v=1691437563 375w,//resinclad.com/cdn/shop/files/DevilsTonguePlant_410x.png?v=1691437563 410w,//resinclad.com/cdn/shop/files/DevilsTonguePlant_520x.png?v=1691437563 520w,//resinclad.com/cdn/shop/files/DevilsTonguePlant_576x.png?v=1691437563 576w,//resinclad.com/cdn/shop/files/DevilsTonguePlant_768x.png?v=1691437563 768w,//resinclad.com/cdn/shop/files/DevilsTonguePlant_992x.png?v=1691437563 992w,//resinclad.com/cdn/shop/files/DevilsTonguePlant_1024x.png?v=1691437563 1024w,//resinclad.com/cdn/shop/files/DevilsTonguePlant_1280x.png?v=1691437563 1280w)
Basing Bits - Devils Tongue Plant
$6.99
Basing Bits are designed to add flare to your miniature bases and terrain
Comes in 32mm scale
Includes all 5 models
Like this model? Click here to check out the rest of our collection from Goon Master Games
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Goon Master Games
@GoonMasterGames
If you would like to follow or support this artist, please check out the links below.
patreon.com/GoonMasterGames
instagram.com/GoonMasterGames
myminifactory.com/users/GoonMasterGames
![Basing Bits - Dragon Tree](http://resinclad.com/cdn/shop/files/DragonTree_375x.png?v=1691437505 375w,//resinclad.com/cdn/shop/files/DragonTree_410x.png?v=1691437505 410w,//resinclad.com/cdn/shop/files/DragonTree_520x.png?v=1691437505 520w,//resinclad.com/cdn/shop/files/DragonTree_576x.png?v=1691437505 576w,//resinclad.com/cdn/shop/files/DragonTree_768x.png?v=1691437505 768w,//resinclad.com/cdn/shop/files/DragonTree_992x.png?v=1691437505 992w,//resinclad.com/cdn/shop/files/DragonTree_1024x.png?v=1691437505 1024w,//resinclad.com/cdn/shop/files/DragonTree_1280x.png?v=1691437505 1280w)
Basing Bits - Dragon Tree
$9.99
Basing Bits are designed to add flare to your miniature bases and terrain
Comes in 32mm scale
Includes all 5 models
Like this model? Click here to check out the rest of our collection from Goon Master Games
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Goon Master Games
@GoonMasterGames
If you would like to follow or support this artist, please check out the links below.
patreon.com/GoonMasterGames
instagram.com/GoonMasterGames
myminifactory.com/users/GoonMasterGames
![Basing Bits - Flaming Sword Plant](http://resinclad.com/cdn/shop/files/FlamingSwordPlant_375x.png?v=1691437343 375w,//resinclad.com/cdn/shop/files/FlamingSwordPlant_410x.png?v=1691437343 410w,//resinclad.com/cdn/shop/files/FlamingSwordPlant_520x.png?v=1691437343 520w,//resinclad.com/cdn/shop/files/FlamingSwordPlant_576x.png?v=1691437343 576w,//resinclad.com/cdn/shop/files/FlamingSwordPlant_768x.png?v=1691437343 768w,//resinclad.com/cdn/shop/files/FlamingSwordPlant_992x.png?v=1691437343 992w,//resinclad.com/cdn/shop/files/FlamingSwordPlant_1024x.png?v=1691437343 1024w,//resinclad.com/cdn/shop/files/FlamingSwordPlant_1280x.png?v=1691437343 1280w)
Basing Bits - Flaming Sword Plant
$6.99
Basing Bits are designed to add flare to your miniature bases and terrain
Comes in 32mm scale
Includes all 5 models
Like this model? Click here to check out the rest of our collection from Goon Master Games
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Goon Master Games
@GoonMasterGames
If you would like to follow or support this artist, please check out the links below.
patreon.com/GoonMasterGames
instagram.com/GoonMasterGames
myminifactory.com/users/GoonMasterGames
![Basing Bits - Fungus](http://resinclad.com/cdn/shop/files/Fungus_375x.png?v=1691437167 375w,//resinclad.com/cdn/shop/files/Fungus_410x.png?v=1691437167 410w,//resinclad.com/cdn/shop/files/Fungus_520x.png?v=1691437167 520w,//resinclad.com/cdn/shop/files/Fungus_576x.png?v=1691437167 576w,//resinclad.com/cdn/shop/files/Fungus_768x.png?v=1691437167 768w,//resinclad.com/cdn/shop/files/Fungus_992x.png?v=1691437167 992w,//resinclad.com/cdn/shop/files/Fungus_1024x.png?v=1691437167 1024w,//resinclad.com/cdn/shop/files/Fungus_1280x.png?v=1691437167 1280w)
Basing Bits - Fungus
$6.99
Basing Bits are designed to add flare to your miniature bases and terrain
Comes in 32mm scale
Includes all 5 models
Like this model? Click here to check out the rest of our collection from Goon Master Games
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Goon Master Games
@GoonMasterGames
If you would like to follow or support this artist, please check out the links below.
patreon.com/GoonMasterGames
instagram.com/GoonMasterGames
myminifactory.com/users/GoonMasterGames
![Basing Bits - Herbs](http://resinclad.com/cdn/shop/files/Herb_375x.png?v=1691436821 375w,//resinclad.com/cdn/shop/files/Herb_410x.png?v=1691436821 410w,//resinclad.com/cdn/shop/files/Herb_520x.png?v=1691436821 520w,//resinclad.com/cdn/shop/files/Herb_576x.png?v=1691436821 576w,//resinclad.com/cdn/shop/files/Herb_768x.png?v=1691436821 768w,//resinclad.com/cdn/shop/files/Herb_992x.png?v=1691436821 992w,//resinclad.com/cdn/shop/files/Herb_1024x.png?v=1691436821 1024w,//resinclad.com/cdn/shop/files/Herb_1280x.png?v=1691436821 1280w)
Basing Bits - Herbs
$7.99
Basing Bits are designed to add flare to your miniature bases and terrain
Comes in 32mm scale
Includes all 5 models
Like this model? Click here to check out the rest of our collection from Goon Master Games
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Goon Master Games
@GoonMasterGames
If you would like to follow or support this artist, please check out the links below.
patreon.com/GoonMasterGames
instagram.com/GoonMasterGames
myminifactory.com/users/GoonMasterGames
![Basing Bits - Monstera Deliciosa](http://resinclad.com/cdn/shop/files/MonsteraDeliciosa_375x.png?v=1691436314 375w,//resinclad.com/cdn/shop/files/MonsteraDeliciosa_410x.png?v=1691436314 410w,//resinclad.com/cdn/shop/files/MonsteraDeliciosa_520x.png?v=1691436314 520w,//resinclad.com/cdn/shop/files/MonsteraDeliciosa_576x.png?v=1691436314 576w,//resinclad.com/cdn/shop/files/MonsteraDeliciosa_768x.png?v=1691436314 768w,//resinclad.com/cdn/shop/files/MonsteraDeliciosa_992x.png?v=1691436314 992w,//resinclad.com/cdn/shop/files/MonsteraDeliciosa_1024x.png?v=1691436314 1024w,//resinclad.com/cdn/shop/files/MonsteraDeliciosa_1280x.png?v=1691436314 1280w)
Basing Bits - Monstera Deliciosa
$7.99
Basing Bits are designed to add flare to your miniature bases and terrain
Comes in 32mm scale
Includes all 5 models
Like this model? Click here to check out the rest of our collection from Goon Master Games
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Goon Master Games
@GoonMasterGames
If you would like to follow or support this artist, please check out the links below.
patreon.com/GoonMasterGames
instagram.com/GoonMasterGames
myminifactory.com/users/GoonMasterGames
![Wild Ruin Bases](http://resinclad.com/cdn/shop/products/LabeledWildRuinBases_375x.png?v=1649440428 375w,//resinclad.com/cdn/shop/products/LabeledWildRuinBases_410x.png?v=1649440428 410w,//resinclad.com/cdn/shop/products/LabeledWildRuinBases_520x.png?v=1649440428 520w,//resinclad.com/cdn/shop/products/LabeledWildRuinBases_576x.png?v=1649440428 576w,//resinclad.com/cdn/shop/products/LabeledWildRuinBases_768x.png?v=1649440428 768w,//resinclad.com/cdn/shop/products/LabeledWildRuinBases_992x.png?v=1649440428 992w,//resinclad.com/cdn/shop/products/LabeledWildRuinBases_1024x.png?v=1649440428 1024w,//resinclad.com/cdn/shop/products/LabeledWildRuinBases_1280x.png?v=1649440428 1280w)
Wild Ruin Bases
from $1.25
Like this model? Click here to check out the rest of our collection from Goon Master Games
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Goon Master Games
@GoonMasterGames
If you would like to follow or support this artist, please check out the links below.
patreon.com/GoonMasterGames
instagram.com/GoonMasterGames
myminifactory.com/users/GoonMasterGames