![Armored Supporter Bundle](http://resinclad.com/cdn/shop/products/LabeledArmoredSupporters_375x.png?v=1634847843 375w,//resinclad.com/cdn/shop/products/LabeledArmoredSupporters_410x.png?v=1634847843 410w,//resinclad.com/cdn/shop/products/LabeledArmoredSupporters_520x.png?v=1634847843 520w,//resinclad.com/cdn/shop/products/LabeledArmoredSupporters_576x.png?v=1634847843 576w,//resinclad.com/cdn/shop/products/LabeledArmoredSupporters_768x.png?v=1634847843 768w,//resinclad.com/cdn/shop/products/LabeledArmoredSupporters_992x.png?v=1634847843 992w,//resinclad.com/cdn/shop/products/LabeledArmoredSupporters_1024x.png?v=1634847843 1024w,//resinclad.com/cdn/shop/products/LabeledArmoredSupporters_1280x.png?v=1634847843 1280w)
Armored Supporter Bundle
from $8.99
Base Size: 35mm
Base Style: Nebula - Exo Base
Bundle includes both models
Modular Model:
The following options are available for this model's hands/weapons. Please select your preferred hand/weapon combination. If you do not make a selection then the weapon combo pictured in the render will be selected.
Right Hand:
Shotgun
Launcher
Left Hand:
Shotgun
Launcher
Like this model? Click here to check out the rest of our collection from Cast n Play
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Cast n Play
@CastnPlay
If you would like to follow or support this artist, please check out the links below.
patreon.com/CastnPlay
instagram.com/CastnPlay
myminifactory.com/users/CastnPlay
facebook.com/CastnPlayMinis
youtube.com/castnplay
![Barrels](http://resinclad.com/cdn/shop/products/Barrels_375x.jpg?v=1634225022 375w,//resinclad.com/cdn/shop/products/Barrels_410x.jpg?v=1634225022 410w,//resinclad.com/cdn/shop/products/Barrels_520x.jpg?v=1634225022 520w,//resinclad.com/cdn/shop/products/Barrels_576x.jpg?v=1634225022 576w,//resinclad.com/cdn/shop/products/Barrels_768x.jpg?v=1634225022 768w,//resinclad.com/cdn/shop/products/Barrels_992x.jpg?v=1634225022 992w,//resinclad.com/cdn/shop/products/Barrels_1024x.jpg?v=1634225022 1024w,//resinclad.com/cdn/shop/products/Barrels_1280x.jpg?v=1634225022 1280w)
Barrels
$7.99
Size: Models range from 23.5mm to 28mm tall
Includes all 3 models
Like this model? Click here to check out the rest of our collection from Cast n Play
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Cast n Play
@CastnPlay
If you would like to follow or support this artist, please check out the links below.
patreon.com/CastnPlay
instagram.com/CastnPlay
myminifactory.com/users/CastnPlay
facebook.com/CastnPlayMinis
youtube.com/castnplay
![Death Hornet Bundle](http://resinclad.com/cdn/shop/products/Ugnix_DeathHornet_AllOutWar_375x.png?v=1671555662 375w,//resinclad.com/cdn/shop/products/Ugnix_DeathHornet_AllOutWar_410x.png?v=1671555662 410w,//resinclad.com/cdn/shop/products/Ugnix_DeathHornet_AllOutWar_520x.png?v=1671555662 520w,//resinclad.com/cdn/shop/products/Ugnix_DeathHornet_AllOutWar_576x.png?v=1671555662 576w,//resinclad.com/cdn/shop/products/Ugnix_DeathHornet_AllOutWar_768x.png?v=1671555662 768w,//resinclad.com/cdn/shop/products/Ugnix_DeathHornet_AllOutWar_992x.png?v=1671555662 992w,//resinclad.com/cdn/shop/products/Ugnix_DeathHornet_AllOutWar_1024x.png?v=1671555662 1024w,//resinclad.com/cdn/shop/products/Ugnix_DeathHornet_AllOutWar_1280x.png?v=1671555662 1280w)
Death Hornet Bundle
from $7.99
Base Size: 35mm
Base Style: Nebula - Ugnix Base
Bundle includes both models
Like this model? Click here to check out the rest of our collection from Cast n Play
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Cast n Play
@CastnPlay
If you would like to follow or support this artist, please check out the links below.
patreon.com/CastnPlay
instagram.com/CastnPlay
myminifactory.com/users/CastnPlay
facebook.com/CastnPlayMinis
youtube.com/castnplay
![ERZA Commander](http://resinclad.com/cdn/shop/products/ERZA_COMMANDER_375x.jpg?v=1634237161 375w,//resinclad.com/cdn/shop/products/ERZA_COMMANDER_410x.jpg?v=1634237161 410w,//resinclad.com/cdn/shop/products/ERZA_COMMANDER_520x.jpg?v=1634237161 520w,//resinclad.com/cdn/shop/products/ERZA_COMMANDER_576x.jpg?v=1634237161 576w,//resinclad.com/cdn/shop/products/ERZA_COMMANDER_768x.jpg?v=1634237161 768w,//resinclad.com/cdn/shop/products/ERZA_COMMANDER_992x.jpg?v=1634237161 992w,//resinclad.com/cdn/shop/products/ERZA_COMMANDER_1024x.jpg?v=1634237161 1024w,//resinclad.com/cdn/shop/products/ERZA_COMMANDER_1280x.jpg?v=1634237161 1280w)
ERZA Commander
from $7.99
Base Size: 35mm
Base Style: Nebula - Legion Base
Modular Model:
The following options are available for this model's hands/weapons. Please select your preferred hand/weapon combination. If you do not make a selection then the weapon combo pictured in the render will be selected.
Right Hand:
2H Minigun (takes both hands)
Pistol
Sword
Empty
Left Hand:
2H Minigun (takes both hands)
Pistol
Sword
Empty
Like this model? Click here to check out the rest of our collection from Cast n Play
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Cast n Play
@CastnPlay
If you would like to follow or support this artist, please check out the links below.
patreon.com/CastnPlay
instagram.com/CastnPlay
myminifactory.com/users/CastnPlay
facebook.com/CastnPlayMinis
youtube.com/castnplay
![ERZA Knights Bundle](http://resinclad.com/cdn/shop/products/LabeledERZAKnights_375x.jpg?v=1634239487 375w,//resinclad.com/cdn/shop/products/LabeledERZAKnights_410x.jpg?v=1634239487 410w,//resinclad.com/cdn/shop/products/LabeledERZAKnights_520x.jpg?v=1634239487 520w,//resinclad.com/cdn/shop/products/LabeledERZAKnights_576x.jpg?v=1634239487 576w,//resinclad.com/cdn/shop/products/LabeledERZAKnights_768x.jpg?v=1634239487 768w,//resinclad.com/cdn/shop/products/LabeledERZAKnights_992x.jpg?v=1634239487 992w,//resinclad.com/cdn/shop/products/LabeledERZAKnights_1024x.jpg?v=1634239487 1024w,//resinclad.com/cdn/shop/products/LabeledERZAKnights_1280x.jpg?v=1634239487 1280w)
ERZA Knights Bundle
from $7.99
Base Size: 35mm
Base Style: Nebula - Legion Base
Bundle includes all 3 models
Modular Model:
The following options are available for this model's hands/weapons. Please select your preferred hand/weapon combination. If you do not make a selection then the weapon combo pictured in the render will be selected.
Right Hand:
Pistol
Sword
Empty
Left Hand:
Pistol
Sword
Empty
Like this model? Click here to check out the rest of our collection from Cast n Play
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Cast n Play
@CastnPlay
If you would like to follow or support this artist, please check out the links below.
patreon.com/CastnPlay
instagram.com/CastnPlay
myminifactory.com/users/CastnPlay
facebook.com/CastnPlayMinis
youtube.com/castnplay
![Exo Colossus](http://resinclad.com/cdn/shop/products/Exo_Colossus_AllOutWar_375x.png?v=1671561317 375w,//resinclad.com/cdn/shop/products/Exo_Colossus_AllOutWar_410x.png?v=1671561317 410w,//resinclad.com/cdn/shop/products/Exo_Colossus_AllOutWar_520x.png?v=1671561317 520w,//resinclad.com/cdn/shop/products/Exo_Colossus_AllOutWar_576x.png?v=1671561317 576w,//resinclad.com/cdn/shop/products/Exo_Colossus_AllOutWar_768x.png?v=1671561317 768w,//resinclad.com/cdn/shop/products/Exo_Colossus_AllOutWar_992x.png?v=1671561317 992w,//resinclad.com/cdn/shop/products/Exo_Colossus_AllOutWar_1024x.png?v=1671561317 1024w,//resinclad.com/cdn/shop/products/Exo_Colossus_AllOutWar_1280x.png?v=1671561317 1280w)
Exo Colossus
$67.99
Approximately 134mm tall
Like this model? Click here to check out the rest of our collection from Cast n Play
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Cast n Play
@CastnPlay
If you would like to follow or support this artist, please check out the links below.
patreon.com/CastnPlay
instagram.com/CastnPlay
myminifactory.com/users/CastnPlay
facebook.com/CastnPlayMinis
youtube.com/castnplay
![Exo Commander](http://resinclad.com/cdn/shop/products/ExoCommander_375x.png?v=1634239897 375w,//resinclad.com/cdn/shop/products/ExoCommander_410x.png?v=1634239897 410w,//resinclad.com/cdn/shop/products/ExoCommander_520x.png?v=1634239897 520w,//resinclad.com/cdn/shop/products/ExoCommander_576x.png?v=1634239897 576w,//resinclad.com/cdn/shop/products/ExoCommander_768x.png?v=1634239897 768w,//resinclad.com/cdn/shop/products/ExoCommander_992x.png?v=1634239897 992w,//resinclad.com/cdn/shop/products/ExoCommander_1024x.png?v=1634239897 1024w,//resinclad.com/cdn/shop/products/ExoCommander_1280x.png?v=1634239897 1280w)
Exo Commander
from $7.99
Base Size: 35mm
Base Style: Nebula - Exo Base
Modular Model:
The following options are available for this model's hands/weapons. Please select your preferred hand/weapon combination. If you do not make a selection then the weapon combo pictured in the render will be selected.
Right Hand:
Pistol
Arm Blade
Sword
Hammer
Rifle at arms
Rifle at ease
Left Hand:
Pistol
Arm Blade
Sword
Hammer
Rifle at arms
Rifle at ease
Like this model? Click here to check out the rest of our collection from Cast n Play
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Cast n Play
@CastnPlay
If you would like to follow or support this artist, please check out the links below.
patreon.com/CastnPlay
instagram.com/CastnPlay
myminifactory.com/users/CastnPlay
facebook.com/CastnPlayMinis
youtube.com/castnplay
![Exo Marine Bundle](http://resinclad.com/cdn/shop/products/LabeledExoMarines_375x.jpg?v=1634241756 375w,//resinclad.com/cdn/shop/products/LabeledExoMarines_410x.jpg?v=1634241756 410w,//resinclad.com/cdn/shop/products/LabeledExoMarines_520x.jpg?v=1634241756 520w,//resinclad.com/cdn/shop/products/LabeledExoMarines_576x.jpg?v=1634241756 576w,//resinclad.com/cdn/shop/products/LabeledExoMarines_768x.jpg?v=1634241756 768w,//resinclad.com/cdn/shop/products/LabeledExoMarines_992x.jpg?v=1634241756 992w,//resinclad.com/cdn/shop/products/LabeledExoMarines_1024x.jpg?v=1634241756 1024w,//resinclad.com/cdn/shop/products/LabeledExoMarines_1280x.jpg?v=1634241756 1280w)
Exo Marine Bundle
from $7.99
Base Size: 35mm
Base Style: Nebula - Exo Base
Bundle includes all 3 models
Modular Model:
The following options are available for this model's hands/weapons. Please select your preferred hand/weapon combination. If you do not make a selection then the weapon combo pictured in the render will be selected.
Right Hand:
Pistol
Arm Blade
Sword
Hammer
Rifle at arms
Rifle at ease
Fist
2H - Rifle at arms (pictured) (takes both hands)
Left Hand:
Pistol
Arm Blade
Sword
Hammer
Rifle at arms
Rifle at ease
Fist
2H - Rifle at arms (pictured) (takes both hands)
Like this model? Click here to check out the rest of our collection from Cast n Play
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Cast n Play
@CastnPlay
If you would like to follow or support this artist, please check out the links below.
patreon.com/CastnPlay
instagram.com/CastnPlay
myminifactory.com/users/CastnPlay
facebook.com/CastnPlayMinis
youtube.com/castnplay
![Exo Moon Arrow Bundle](http://resinclad.com/cdn/shop/products/FixedExo_MoonArrows_AllOutWar_375x.png?v=1671561842 375w,//resinclad.com/cdn/shop/products/FixedExo_MoonArrows_AllOutWar_410x.png?v=1671561842 410w,//resinclad.com/cdn/shop/products/FixedExo_MoonArrows_AllOutWar_520x.png?v=1671561842 520w,//resinclad.com/cdn/shop/products/FixedExo_MoonArrows_AllOutWar_576x.png?v=1671561842 576w,//resinclad.com/cdn/shop/products/FixedExo_MoonArrows_AllOutWar_768x.png?v=1671561842 768w,//resinclad.com/cdn/shop/products/FixedExo_MoonArrows_AllOutWar_992x.png?v=1671561842 992w,//resinclad.com/cdn/shop/products/FixedExo_MoonArrows_AllOutWar_1024x.png?v=1671561842 1024w,//resinclad.com/cdn/shop/products/FixedExo_MoonArrows_AllOutWar_1280x.png?v=1671561842 1280w)
Exo Moon Arrow Bundle
from $11.99
Base Size: 80mm
Base Style: Nebula - Exo Pill Base
Bundle includes both models
Like this model? Click here to check out the rest of our collection from Cast n Play
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Cast n Play
@CastnPlay
If you would like to follow or support this artist, please check out the links below.
patreon.com/CastnPlay
instagram.com/CastnPlay
myminifactory.com/users/CastnPlay
facebook.com/CastnPlayMinis
youtube.com/castnplay
![Exo Romulus Bundle](http://resinclad.com/cdn/shop/products/Exo_Romulus_AllOutWar_375x.png?v=1671562954 375w,//resinclad.com/cdn/shop/products/Exo_Romulus_AllOutWar_410x.png?v=1671562954 410w,//resinclad.com/cdn/shop/products/Exo_Romulus_AllOutWar_520x.png?v=1671562954 520w,//resinclad.com/cdn/shop/products/Exo_Romulus_AllOutWar_576x.png?v=1671562954 576w,//resinclad.com/cdn/shop/products/Exo_Romulus_AllOutWar_768x.png?v=1671562954 768w,//resinclad.com/cdn/shop/products/Exo_Romulus_AllOutWar_992x.png?v=1671562954 992w,//resinclad.com/cdn/shop/products/Exo_Romulus_AllOutWar_1024x.png?v=1671562954 1024w,//resinclad.com/cdn/shop/products/Exo_Romulus_AllOutWar_1280x.png?v=1671562954 1280w)
Exo Romulus Bundle
from $7.49
Base Size: 35mm
Base Style: Nebula - Exo Base
Bundle includes both models
Like this model? Click here to check out the rest of our collection from Cast n Play
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Cast n Play
@CastnPlay
If you would like to follow or support this artist, please check out the links below.
patreon.com/CastnPlay
instagram.com/CastnPlay
myminifactory.com/users/CastnPlay
facebook.com/CastnPlayMinis
youtube.com/castnplay
![Exo Sledgehammer](http://resinclad.com/cdn/shop/products/AdjustedExo_SledgeHammer_AllOutWar_375x.png?v=1671563739 375w,//resinclad.com/cdn/shop/products/AdjustedExo_SledgeHammer_AllOutWar_410x.png?v=1671563739 410w,//resinclad.com/cdn/shop/products/AdjustedExo_SledgeHammer_AllOutWar_520x.png?v=1671563739 520w,//resinclad.com/cdn/shop/products/AdjustedExo_SledgeHammer_AllOutWar_576x.png?v=1671563739 576w,//resinclad.com/cdn/shop/products/AdjustedExo_SledgeHammer_AllOutWar_768x.png?v=1671563739 768w,//resinclad.com/cdn/shop/products/AdjustedExo_SledgeHammer_AllOutWar_992x.png?v=1671563739 992w,//resinclad.com/cdn/shop/products/AdjustedExo_SledgeHammer_AllOutWar_1024x.png?v=1671563739 1024w,//resinclad.com/cdn/shop/products/AdjustedExo_SledgeHammer_AllOutWar_1280x.png?v=1671563739 1280w)
Exo Sledgehammer
from $6.99
Base Size: 35mm
Base Style: Nebula - Exo Base
Bundle includes both models
Like this model? Click here to check out the rest of our collection from Cast n Play
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Cast n Play
@CastnPlay
If you would like to follow or support this artist, please check out the links below.
patreon.com/CastnPlay
instagram.com/CastnPlay
myminifactory.com/users/CastnPlay
facebook.com/CastnPlayMinis
youtube.com/castnplay
![Ghazneeks Commander](http://resinclad.com/cdn/shop/products/Ugnix_ghazneeks_commander_375x.png?v=1634844918 375w,//resinclad.com/cdn/shop/products/Ugnix_ghazneeks_commander_410x.png?v=1634844918 410w,//resinclad.com/cdn/shop/products/Ugnix_ghazneeks_commander_520x.png?v=1634844918 520w,//resinclad.com/cdn/shop/products/Ugnix_ghazneeks_commander_576x.png?v=1634844918 576w,//resinclad.com/cdn/shop/products/Ugnix_ghazneeks_commander_768x.png?v=1634844918 768w,//resinclad.com/cdn/shop/products/Ugnix_ghazneeks_commander_992x.png?v=1634844918 992w,//resinclad.com/cdn/shop/products/Ugnix_ghazneeks_commander_1024x.png?v=1634844918 1024w,//resinclad.com/cdn/shop/products/Ugnix_ghazneeks_commander_1280x.png?v=1634844918 1280w)
Ghazneeks Commander
from $8.99
Base Size: 35mm
Base Style: Nebula - Ugnix Base
Modular Model:
The following options are available for this model's hands/weapons. Please select your preferred hand/weapon combination. If you do not make a selection then the weapon combo pictured in the render will be selected.
Right Hand Top & Bottom:
Pistol (arm bent or straight)
Rifle (arm bent or straight)
Sword (arm bent or straight)
Empty (arm bent or straight)
Left Hand Top & Bottom:
Pistol (arm bent or straight)
Rifle (arm bent or straight)
Sword (arm bent or straight)
Empty (arm bent or straight)
Like this model? Click here to check out the rest of our collection from Cast n Play
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Cast n Play
@CastnPlay
If you would like to follow or support this artist, please check out the links below.
patreon.com/CastnPlay
instagram.com/CastnPlay
myminifactory.com/users/CastnPlay
facebook.com/CastnPlayMinis
youtube.com/castnplay
![Ghazneeks Trooper Bundle](http://resinclad.com/cdn/shop/products/LabeledGhazneeksTroopers_375x.png?v=1634242369 375w,//resinclad.com/cdn/shop/products/LabeledGhazneeksTroopers_410x.png?v=1634242369 410w,//resinclad.com/cdn/shop/products/LabeledGhazneeksTroopers_520x.png?v=1634242369 520w,//resinclad.com/cdn/shop/products/LabeledGhazneeksTroopers_576x.png?v=1634242369 576w,//resinclad.com/cdn/shop/products/LabeledGhazneeksTroopers_768x.png?v=1634242369 768w,//resinclad.com/cdn/shop/products/LabeledGhazneeksTroopers_992x.png?v=1634242369 992w,//resinclad.com/cdn/shop/products/LabeledGhazneeksTroopers_1024x.png?v=1634242369 1024w,//resinclad.com/cdn/shop/products/LabeledGhazneeksTroopers_1280x.png?v=1634242369 1280w)
Ghazneeks Trooper Bundle
from $7.99
Base Size: 35mm
Base Style: Nebula - Ugnix Base
Bundle includes all 3 models
Modular Model:
The following options are available for this model's hands/weapons. Please select your preferred hand/weapon combination. If you do not make a selection then the weapon combo pictured in the render will be selected.
** Only Trooper 2 can come with 2H Rifle **
Right Hand:
Pistol
Angled Pistol
Sword
Angled Sword
Rifle
Angled Rifle
Fist
Angled Fist
Left Hand:
Pistol
Angled Pistol
Sword
Angled Sword
Rifle
Angled Rifle
Fist
Angled Fist
Like this model? Click here to check out the rest of our collection from Cast n Play
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Cast n Play
@CastnPlay
If you would like to follow or support this artist, please check out the links below.
patreon.com/CastnPlay
instagram.com/CastnPlay
myminifactory.com/users/CastnPlay
facebook.com/CastnPlayMinis
youtube.com/castnplay
![Hangar Door](http://resinclad.com/cdn/shop/products/UnderGroundHangarDoor_poster_375x.png?v=1634934325 375w,//resinclad.com/cdn/shop/products/UnderGroundHangarDoor_poster_410x.png?v=1634934325 410w,//resinclad.com/cdn/shop/products/UnderGroundHangarDoor_poster_520x.png?v=1634934325 520w,//resinclad.com/cdn/shop/products/UnderGroundHangarDoor_poster_576x.png?v=1634934325 576w,//resinclad.com/cdn/shop/products/UnderGroundHangarDoor_poster_768x.png?v=1634934325 768w,//resinclad.com/cdn/shop/products/UnderGroundHangarDoor_poster_992x.png?v=1634934325 992w,//resinclad.com/cdn/shop/products/UnderGroundHangarDoor_poster_1024x.png?v=1634934325 1024w,//resinclad.com/cdn/shop/products/UnderGroundHangarDoor_poster_1280x.png?v=1634934325 1280w)
Hangar Door
$19.99
Size: 111.5mm x 26mm x 119mm
Like this model? Click here to check out the rest of our collection from Cast n Play
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Cast n Play
@CastnPlay
If you would like to follow or support this artist, please check out the links below.
patreon.com/CastnPlay
instagram.com/CastnPlay
myminifactory.com/users/CastnPlay
facebook.com/CastnPlayMinis
youtube.com/castnplay
![Hive Gehenna](http://resinclad.com/cdn/shop/products/Resai_HiveGehenna_AllOutWar_375x.png?v=1671572686 375w,//resinclad.com/cdn/shop/products/Resai_HiveGehenna_AllOutWar_410x.png?v=1671572686 410w,//resinclad.com/cdn/shop/products/Resai_HiveGehenna_AllOutWar_520x.png?v=1671572686 520w,//resinclad.com/cdn/shop/products/Resai_HiveGehenna_AllOutWar_576x.png?v=1671572686 576w,//resinclad.com/cdn/shop/products/Resai_HiveGehenna_AllOutWar_768x.png?v=1671572686 768w,//resinclad.com/cdn/shop/products/Resai_HiveGehenna_AllOutWar_992x.png?v=1671572686 992w,//resinclad.com/cdn/shop/products/Resai_HiveGehenna_AllOutWar_1024x.png?v=1671572686 1024w,//resinclad.com/cdn/shop/products/Resai_HiveGehenna_AllOutWar_1280x.png?v=1671572686 1280w)
Hive Gehenna
$59.99
Approximately 112mm tall
Like this model? Click here to check out the rest of our collection from Cast n Play
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Cast n Play
@CastnPlay
If you would like to follow or support this artist, please check out the links below.
patreon.com/CastnPlay
instagram.com/CastnPlay
myminifactory.com/users/CastnPlay
facebook.com/CastnPlayMinis
youtube.com/castnplay
![Hive Nightmare](http://resinclad.com/cdn/shop/products/Hive_Nightmare_375x.png?v=1634242960 375w,//resinclad.com/cdn/shop/products/Hive_Nightmare_410x.png?v=1634242960 410w,//resinclad.com/cdn/shop/products/Hive_Nightmare_520x.png?v=1634242960 520w,//resinclad.com/cdn/shop/products/Hive_Nightmare_576x.png?v=1634242960 576w,//resinclad.com/cdn/shop/products/Hive_Nightmare_768x.png?v=1634242960 768w,//resinclad.com/cdn/shop/products/Hive_Nightmare_992x.png?v=1634242960 992w,//resinclad.com/cdn/shop/products/Hive_Nightmare_1024x.png?v=1634242960 1024w,//resinclad.com/cdn/shop/products/Hive_Nightmare_1280x.png?v=1634242960 1280w)
Hive Nightmare
from $15.99
Base Size: 50mm
Base Style: Nebula - Res'ai Base
Like this model? Click here to check out the rest of our collection from Cast n Play
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Cast n Play
@CastnPlay
If you would like to follow or support this artist, please check out the links below.
patreon.com/CastnPlay
instagram.com/CastnPlay
myminifactory.com/users/CastnPlay
facebook.com/CastnPlayMinis
youtube.com/castnplay
![Kinkalis Commander](http://resinclad.com/cdn/shop/products/Kinkalis_Commander_375x.png?v=1634243372 375w,//resinclad.com/cdn/shop/products/Kinkalis_Commander_410x.png?v=1634243372 410w,//resinclad.com/cdn/shop/products/Kinkalis_Commander_520x.png?v=1634243372 520w,//resinclad.com/cdn/shop/products/Kinkalis_Commander_576x.png?v=1634243372 576w,//resinclad.com/cdn/shop/products/Kinkalis_Commander_768x.png?v=1634243372 768w,//resinclad.com/cdn/shop/products/Kinkalis_Commander_992x.png?v=1634243372 992w,//resinclad.com/cdn/shop/products/Kinkalis_Commander_1024x.png?v=1634243372 1024w,//resinclad.com/cdn/shop/products/Kinkalis_Commander_1280x.png?v=1634243372 1280w)
Kinkalis Commander
from $15.99
Base Size: 50mm
Base Style: Nebula - Ugnix Base
Modular Model:
The following options are available for this model's hands/weapons. Please select your preferred hand/weapon combination. If you do not make a selection then the weapon combo pictured in the render will be selected.
Right Hand:
Extended Arm Blade
Fist
Left Hand:
Retracted Arm Blade
Fist
Like this model? Click here to check out the rest of our collection from Cast n Play
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Cast n Play
@CastnPlay
If you would like to follow or support this artist, please check out the links below.
patreon.com/CastnPlay
instagram.com/CastnPlay
myminifactory.com/users/CastnPlay
facebook.com/CastnPlayMinis
youtube.com/castnplay
![Kinkalis Trooper Bundle](http://resinclad.com/cdn/shop/products/LabeledKinkalisTrooper_375x.png?v=1634302051 375w,//resinclad.com/cdn/shop/products/LabeledKinkalisTrooper_410x.png?v=1634302051 410w,//resinclad.com/cdn/shop/products/LabeledKinkalisTrooper_520x.png?v=1634302051 520w,//resinclad.com/cdn/shop/products/LabeledKinkalisTrooper_576x.png?v=1634302051 576w,//resinclad.com/cdn/shop/products/LabeledKinkalisTrooper_768x.png?v=1634302051 768w,//resinclad.com/cdn/shop/products/LabeledKinkalisTrooper_992x.png?v=1634302051 992w,//resinclad.com/cdn/shop/products/LabeledKinkalisTrooper_1024x.png?v=1634302051 1024w,//resinclad.com/cdn/shop/products/LabeledKinkalisTrooper_1280x.png?v=1634302051 1280w)
Kinkalis Trooper Bundle
from $7.99
Base Size: 50mm
Base Style: Nebula - Ugnix Base
Bundle includes all 3 models
Modular Model:
The following options are available for this model's hands/weapons. Please select your preferred hand/weapon combination. If you do not make a selection then the weapon combo pictured in the render will be selected.
** Only Trooper 2 can come with 2H Axe **
Right Hand:
Empty
Sword
Shield
Left Hand:
Empty
Sword
Shield
Like this model? Click here to check out the rest of our collection from Cast n Play
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Cast n Play
@CastnPlay
If you would like to follow or support this artist, please check out the links below.
patreon.com/CastnPlay
instagram.com/CastnPlay
myminifactory.com/users/CastnPlay
facebook.com/CastnPlayMinis
youtube.com/castnplay
![Legion Crusader](http://resinclad.com/cdn/shop/products/Legion_Crusader_AllOutWar_375x.png?v=1671564565 375w,//resinclad.com/cdn/shop/products/Legion_Crusader_AllOutWar_410x.png?v=1671564565 410w,//resinclad.com/cdn/shop/products/Legion_Crusader_AllOutWar_520x.png?v=1671564565 520w,//resinclad.com/cdn/shop/products/Legion_Crusader_AllOutWar_576x.png?v=1671564565 576w,//resinclad.com/cdn/shop/products/Legion_Crusader_AllOutWar_768x.png?v=1671564565 768w,//resinclad.com/cdn/shop/products/Legion_Crusader_AllOutWar_992x.png?v=1671564565 992w,//resinclad.com/cdn/shop/products/Legion_Crusader_AllOutWar_1024x.png?v=1671564565 1024w,//resinclad.com/cdn/shop/products/Legion_Crusader_AllOutWar_1280x.png?v=1671564565 1280w)
Legion Crusader
$57.99
Approximately 141mm tall
Like this model? Click here to check out the rest of our collection from Cast n Play
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Cast n Play
@CastnPlay
If you would like to follow or support this artist, please check out the links below.
patreon.com/CastnPlay
instagram.com/CastnPlay
myminifactory.com/users/CastnPlay
facebook.com/CastnPlayMinis
youtube.com/castnplay
![Legion Infantry Bundle](http://resinclad.com/cdn/shop/products/LabeledLegionInfantry_375x.jpg?v=1634304301 375w,//resinclad.com/cdn/shop/products/LabeledLegionInfantry_410x.jpg?v=1634304301 410w,//resinclad.com/cdn/shop/products/LabeledLegionInfantry_520x.jpg?v=1634304301 520w,//resinclad.com/cdn/shop/products/LabeledLegionInfantry_576x.jpg?v=1634304301 576w,//resinclad.com/cdn/shop/products/LabeledLegionInfantry_768x.jpg?v=1634304301 768w,//resinclad.com/cdn/shop/products/LabeledLegionInfantry_992x.jpg?v=1634304301 992w,//resinclad.com/cdn/shop/products/LabeledLegionInfantry_1024x.jpg?v=1634304301 1024w,//resinclad.com/cdn/shop/products/LabeledLegionInfantry_1280x.jpg?v=1634304301 1280w)
Legion Infantry Bundle
from $7.99
Base Size: 35mm
Base Style: Nebula - Legion Base
Bundle includes all 3 models
Modular Model:
The following options are available for this model's hands/weapons. Please select your preferred hand/weapon combination. If you do not make a selection then the weapon combo pictured in the render will be selected.
Right Hand:
2H Rifle (uses both hands)
Sword
Pistol
Banner
Brief Case
Left Hand:
2H Rifle (uses both hands)
Sword
Pistol
Finger Pointing
Like this model? Click here to check out the rest of our collection from Cast n Play
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Cast n Play
@CastnPlay
If you would like to follow or support this artist, please check out the links below.
patreon.com/CastnPlay
instagram.com/CastnPlay
myminifactory.com/users/CastnPlay
facebook.com/CastnPlayMinis
youtube.com/castnplay
![Legion Infantry Commander](http://resinclad.com/cdn/shop/products/legion_infrantrycomander_poster_375x.png?v=1634845498 375w,//resinclad.com/cdn/shop/products/legion_infrantrycomander_poster_410x.png?v=1634845498 410w,//resinclad.com/cdn/shop/products/legion_infrantrycomander_poster_520x.png?v=1634845498 520w,//resinclad.com/cdn/shop/products/legion_infrantrycomander_poster_576x.png?v=1634845498 576w,//resinclad.com/cdn/shop/products/legion_infrantrycomander_poster_768x.png?v=1634845498 768w,//resinclad.com/cdn/shop/products/legion_infrantrycomander_poster_992x.png?v=1634845498 992w,//resinclad.com/cdn/shop/products/legion_infrantrycomander_poster_1024x.png?v=1634845498 1024w,//resinclad.com/cdn/shop/products/legion_infrantrycomander_poster_1280x.png?v=1634845498 1280w)
Legion Infantry Commander
from $8.99
Base Size: 35mm
Base Style: Nebula - Legion Base
Like this model? Click here to check out the rest of our collection from Cast n Play
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Cast n Play
@CastnPlay
If you would like to follow or support this artist, please check out the links below.
patreon.com/CastnPlay
instagram.com/CastnPlay
myminifactory.com/users/CastnPlay
facebook.com/CastnPlayMinis
youtube.com/castnplay
![Legion Presbyter](http://resinclad.com/cdn/shop/products/LabeledLegion_Presbyter_AllOutWar_375x.png?v=1671564822 375w,//resinclad.com/cdn/shop/products/LabeledLegion_Presbyter_AllOutWar_410x.png?v=1671564822 410w,//resinclad.com/cdn/shop/products/LabeledLegion_Presbyter_AllOutWar_520x.png?v=1671564822 520w,//resinclad.com/cdn/shop/products/LabeledLegion_Presbyter_AllOutWar_576x.png?v=1671564822 576w,//resinclad.com/cdn/shop/products/LabeledLegion_Presbyter_AllOutWar_768x.png?v=1671564822 768w,//resinclad.com/cdn/shop/products/LabeledLegion_Presbyter_AllOutWar_992x.png?v=1671564822 992w,//resinclad.com/cdn/shop/products/LabeledLegion_Presbyter_AllOutWar_1024x.png?v=1671564822 1024w,//resinclad.com/cdn/shop/products/LabeledLegion_Presbyter_AllOutWar_1280x.png?v=1671564822 1280w)
Legion Presbyter
$59.99
Approximately 135mm x 95mm x 78mm
Like this model? Click here to check out the rest of our collection from Cast n Play
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Cast n Play
@CastnPlay
If you would like to follow or support this artist, please check out the links below.
patreon.com/CastnPlay
instagram.com/CastnPlay
myminifactory.com/users/CastnPlay
facebook.com/CastnPlayMinis
youtube.com/castnplay
![Legion Prime Mech Trooper Bundle](http://resinclad.com/cdn/shop/products/LabeledPrimeMechTroopers_375x.png?v=1634847466 375w,//resinclad.com/cdn/shop/products/LabeledPrimeMechTroopers_410x.png?v=1634847466 410w,//resinclad.com/cdn/shop/products/LabeledPrimeMechTroopers_520x.png?v=1634847466 520w,//resinclad.com/cdn/shop/products/LabeledPrimeMechTroopers_576x.png?v=1634847466 576w,//resinclad.com/cdn/shop/products/LabeledPrimeMechTroopers_768x.png?v=1634847466 768w,//resinclad.com/cdn/shop/products/LabeledPrimeMechTroopers_992x.png?v=1634847466 992w,//resinclad.com/cdn/shop/products/LabeledPrimeMechTroopers_1024x.png?v=1634847466 1024w,//resinclad.com/cdn/shop/products/LabeledPrimeMechTroopers_1280x.png?v=1634847466 1280w)
Legion Prime Mech Trooper Bundle
from $8.99
Base Size: 50mm
Base Style: Nebula - Legion Base
Bundle includes all 3 models
Like this model? Click here to check out the rest of our collection from Cast n Play
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Cast n Play
@CastnPlay
If you would like to follow or support this artist, please check out the links below.
patreon.com/CastnPlay
instagram.com/CastnPlay
myminifactory.com/users/CastnPlay
facebook.com/CastnPlayMinis
youtube.com/castnplay
![Legion Samaritan](http://resinclad.com/cdn/shop/products/Legion_Samaritan_AllOutWar_375x.png?v=1671565843 375w,//resinclad.com/cdn/shop/products/Legion_Samaritan_AllOutWar_410x.png?v=1671565843 410w,//resinclad.com/cdn/shop/products/Legion_Samaritan_AllOutWar_520x.png?v=1671565843 520w,//resinclad.com/cdn/shop/products/Legion_Samaritan_AllOutWar_576x.png?v=1671565843 576w,//resinclad.com/cdn/shop/products/Legion_Samaritan_AllOutWar_768x.png?v=1671565843 768w,//resinclad.com/cdn/shop/products/Legion_Samaritan_AllOutWar_992x.png?v=1671565843 992w,//resinclad.com/cdn/shop/products/Legion_Samaritan_AllOutWar_1024x.png?v=1671565843 1024w,//resinclad.com/cdn/shop/products/Legion_Samaritan_AllOutWar_1280x.png?v=1671565843 1280w)
Legion Samaritan
from $9.99
Base Size: 35mm
Base Style: Nebula - Legion Base
Bundle includes both models
Like this model? Click here to check out the rest of our collection from Cast n Play
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Cast n Play
@CastnPlay
If you would like to follow or support this artist, please check out the links below.
patreon.com/CastnPlay
instagram.com/CastnPlay
myminifactory.com/users/CastnPlay
facebook.com/CastnPlayMinis
youtube.com/castnplay
![Metal Crates](http://resinclad.com/cdn/shop/products/MetalCrates_375x.jpg?v=1634305168 375w,//resinclad.com/cdn/shop/products/MetalCrates_410x.jpg?v=1634305168 410w,//resinclad.com/cdn/shop/products/MetalCrates_520x.jpg?v=1634305168 520w,//resinclad.com/cdn/shop/products/MetalCrates_576x.jpg?v=1634305168 576w,//resinclad.com/cdn/shop/products/MetalCrates_768x.jpg?v=1634305168 768w,//resinclad.com/cdn/shop/products/MetalCrates_992x.jpg?v=1634305168 992w,//resinclad.com/cdn/shop/products/MetalCrates_1024x.jpg?v=1634305168 1024w,//resinclad.com/cdn/shop/products/MetalCrates_1280x.jpg?v=1634305168 1280w)
Metal Crates
$12.99
Size:
Crate A - 44.5mm x 44.5mm x 27.5 mm
Crate B - 20mm x 38.5mm x 35.5mm
Crate C - 40mm x 40mm x 41.5mm
Includes all 3 models
Like this model? Click here to check out the rest of our collection from Cast n Play
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Cast n Play
@CastnPlay
If you would like to follow or support this artist, please check out the links below.
patreon.com/CastnPlay
instagram.com/CastnPlay
myminifactory.com/users/CastnPlay
facebook.com/CastnPlayMinis
youtube.com/castnplay