![Leshy Bust](http://resinclad.com/cdn/shop/products/Leshybust_375x.png?v=1661972307 375w,//resinclad.com/cdn/shop/products/Leshybust_410x.png?v=1661972307 410w,//resinclad.com/cdn/shop/products/Leshybust_520x.png?v=1661972307 520w,//resinclad.com/cdn/shop/products/Leshybust_576x.png?v=1661972307 576w,//resinclad.com/cdn/shop/products/Leshybust_768x.png?v=1661972307 768w,//resinclad.com/cdn/shop/products/Leshybust_992x.png?v=1661972307 992w,//resinclad.com/cdn/shop/products/Leshybust_1024x.png?v=1661972307 1024w,//resinclad.com/cdn/shop/products/Leshybust_1280x.png?v=1661972307 1280w)
Leshy Bust
$32.99
Model is approximately 118mm tall excluding the stand.
Like this model? Click here to check out the rest of our collection from White Werewolf Tavern
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
White Werewolf Tavern
@WWTavern
If you would like to follow or support this artist, please check out the links below.
patreon.com/whitewerewolftavern
www.instagram.com/wwtavern
myminifactory.com/users/WWTavern
facebook.com/miniatures3d
twitter.com/tavernww
![Lesika The Light-Eyed Druid - Bust](http://resinclad.com/cdn/shop/products/LesikaLight-eyedBust_375x.png?v=1631626509 375w,//resinclad.com/cdn/shop/products/LesikaLight-eyedBust_410x.png?v=1631626509 410w,//resinclad.com/cdn/shop/products/LesikaLight-eyedBust_520x.png?v=1631626509 520w,//resinclad.com/cdn/shop/products/LesikaLight-eyedBust_576x.png?v=1631626509 576w,//resinclad.com/cdn/shop/products/LesikaLight-eyedBust_768x.png?v=1631626509 768w,//resinclad.com/cdn/shop/products/LesikaLight-eyedBust_992x.png?v=1631626509 992w,//resinclad.com/cdn/shop/products/LesikaLight-eyedBust_1024x.png?v=1631626509 1024w,//resinclad.com/cdn/shop/products/LesikaLight-eyedBust_1280x.png?v=1631626509 1280w)
![Lesika The Light-Eyed Druid - Bust](http://resinclad.com/cdn/shop/products/resize-inst-lesika-light-eyed-bust_375x.jpg?v=1631626509 375w,//resinclad.com/cdn/shop/products/resize-inst-lesika-light-eyed-bust_410x.jpg?v=1631626509 410w,//resinclad.com/cdn/shop/products/resize-inst-lesika-light-eyed-bust_520x.jpg?v=1631626509 520w,//resinclad.com/cdn/shop/products/resize-inst-lesika-light-eyed-bust_576x.jpg?v=1631626509 576w,//resinclad.com/cdn/shop/products/resize-inst-lesika-light-eyed-bust_768x.jpg?v=1631626509 768w,//resinclad.com/cdn/shop/products/resize-inst-lesika-light-eyed-bust_992x.jpg?v=1631626509 992w,//resinclad.com/cdn/shop/products/resize-inst-lesika-light-eyed-bust_1024x.jpg?v=1631626509 1024w,//resinclad.com/cdn/shop/products/resize-inst-lesika-light-eyed-bust_1280x.jpg?v=1631626509 1280w)
Lesika The Light-Eyed Druid - Bust
$20.99
Model is approximately 93mm tall excluding the stand.
Like this model? Click here to check out the rest of our collection from White Werewolf Tavern
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
White Werewolf Tavern
@WWTavern
If you would like to follow or support this artist, please check out the links below.
patreon.com/whitewerewolftavern
www.instagram.com/wwtavern
myminifactory.com/users/WWTavern
facebook.com/miniatures3d
twitter.com/tavernww
![Lioness](http://resinclad.com/cdn/shop/products/32_LIONESS_375x.jpg?v=1650042568 375w,//resinclad.com/cdn/shop/products/32_LIONESS_410x.jpg?v=1650042568 410w,//resinclad.com/cdn/shop/products/32_LIONESS_520x.jpg?v=1650042568 520w,//resinclad.com/cdn/shop/products/32_LIONESS_576x.jpg?v=1650042568 576w,//resinclad.com/cdn/shop/products/32_LIONESS_768x.jpg?v=1650042568 768w,//resinclad.com/cdn/shop/products/32_LIONESS_992x.jpg?v=1650042568 992w,//resinclad.com/cdn/shop/products/32_LIONESS_1024x.jpg?v=1650042568 1024w,//resinclad.com/cdn/shop/products/32_LIONESS_1280x.jpg?v=1650042568 1280w)
Lioness
$7.99
Size: 26mm x 35.5mm x 51mm
Like this model? Click here to check out the rest of our collection from 3DIPStudios
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
3DIPStudios
@3DIPStudios
If you would like to follow or support this artist, please check out the link below.
instagram.com/3dipstudios
![Lionfolk Bundle](http://resinclad.com/cdn/shop/products/LionfolkBundle_375x.png?v=1661457707 375w,//resinclad.com/cdn/shop/products/LionfolkBundle_410x.png?v=1661457707 410w,//resinclad.com/cdn/shop/products/LionfolkBundle_520x.png?v=1661457707 520w,//resinclad.com/cdn/shop/products/LionfolkBundle_576x.png?v=1661457707 576w,//resinclad.com/cdn/shop/products/LionfolkBundle_768x.png?v=1661457707 768w,//resinclad.com/cdn/shop/products/LionfolkBundle_992x.png?v=1661457707 992w,//resinclad.com/cdn/shop/products/LionfolkBundle_1024x.png?v=1661457707 1024w,//resinclad.com/cdn/shop/products/LionfolkBundle_1280x.png?v=1661457707 1280w)
![Lionfolk Bundle](http://resinclad.com/cdn/shop/products/LionfolkBarbarian_375x.png?v=1661457710 375w,//resinclad.com/cdn/shop/products/LionfolkBarbarian_410x.png?v=1661457710 410w,//resinclad.com/cdn/shop/products/LionfolkBarbarian_520x.png?v=1661457710 520w,//resinclad.com/cdn/shop/products/LionfolkBarbarian_576x.png?v=1661457710 576w,//resinclad.com/cdn/shop/products/LionfolkBarbarian_768x.png?v=1661457710 768w,//resinclad.com/cdn/shop/products/LionfolkBarbarian_992x.png?v=1661457710 992w,//resinclad.com/cdn/shop/products/LionfolkBarbarian_1024x.png?v=1661457710 1024w,//resinclad.com/cdn/shop/products/LionfolkBarbarian_1280x.png?v=1661457710 1280w)
Lionfolk Bundle
from $7.99
Model Size:
Lionfolk Barbarian - 38.5mm x 39.5mm 26.5mm
Lionfolk Druid - 41mm x 39mm x 27mm
Lionfolk Fighter - 46mm x 40.5mm x 29mm
Base Size:
Lionfolk Barbarian- 25mm
Lionfolk Druid - 25mm
Lionfolk Fighter - 35mm
Base Style: Plain
Bundle includes all 3 models
Like this model? Click here to check out the rest of our collection from Manuel Boria
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Manuel Boria
@ManuelBoria
If you would like to follow or support this artist, please check out the links below.
patreon.com/ManuelBoria
myminifactory.com/users/Manuel_Boria
![Lions](http://resinclad.com/cdn/shop/products/LionBundle_375x.jpg?v=1650039097 375w,//resinclad.com/cdn/shop/products/LionBundle_410x.jpg?v=1650039097 410w,//resinclad.com/cdn/shop/products/LionBundle_520x.jpg?v=1650039097 520w,//resinclad.com/cdn/shop/products/LionBundle_576x.jpg?v=1650039097 576w,//resinclad.com/cdn/shop/products/LionBundle_768x.jpg?v=1650039097 768w,//resinclad.com/cdn/shop/products/LionBundle_992x.jpg?v=1650039097 992w,//resinclad.com/cdn/shop/products/LionBundle_1024x.jpg?v=1650039097 1024w,//resinclad.com/cdn/shop/products/LionBundle_1280x.jpg?v=1650039097 1280w)
![Lions](http://resinclad.com/cdn/shop/products/Lion1_375x.jpg?v=1650039099 375w,//resinclad.com/cdn/shop/products/Lion1_410x.jpg?v=1650039099 410w,//resinclad.com/cdn/shop/products/Lion1_520x.jpg?v=1650039099 520w,//resinclad.com/cdn/shop/products/Lion1_576x.jpg?v=1650039099 576w,//resinclad.com/cdn/shop/products/Lion1_768x.jpg?v=1650039099 768w,//resinclad.com/cdn/shop/products/Lion1_992x.jpg?v=1650039099 992w,//resinclad.com/cdn/shop/products/Lion1_1024x.jpg?v=1650039099 1024w,//resinclad.com/cdn/shop/products/Lion1_1280x.jpg?v=1650039099 1280w)
Lions
from $7.99
Size:
Lion 1 - 34mm x 32mm x 38.5mm
Lion 2 - 21.5mm x 32mm x 36.5mm
Bundle includes both models
Like this model? Click here to check out the rest of our collection from 3DIPStudios
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
3DIPStudios
@3DIPStudios
If you would like to follow or support this artist, please check out the link below.
instagram.com/3dipstudios
![Living Plant](http://resinclad.com/cdn/shop/products/livingplant_375x.jpg?v=1670014895 375w,//resinclad.com/cdn/shop/products/livingplant_410x.jpg?v=1670014895 410w,//resinclad.com/cdn/shop/products/livingplant_520x.jpg?v=1670014895 520w,//resinclad.com/cdn/shop/products/livingplant_576x.jpg?v=1670014895 576w,//resinclad.com/cdn/shop/products/livingplant_768x.jpg?v=1670014895 768w,//resinclad.com/cdn/shop/products/livingplant_992x.jpg?v=1670014895 992w,//resinclad.com/cdn/shop/products/livingplant_1024x.jpg?v=1670014895 1024w,//resinclad.com/cdn/shop/products/livingplant_1280x.jpg?v=1670014895 1280w)
Living Plant
$18.99
Comes in 32mm scale
Base Size: 50mm
Base Style: Specialized
Like this model? Click here to check out the rest of our collection from White Werewolf Tavern
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
White Werewolf Tavern
@WWTavern
If you would like to follow or support this artist, please check out the links below.
patreon.com/whitewerewolftavern
www.instagram.com/wwtavern
myminifactory.com/users/WWTavern
facebook.com/miniatures3d
twitter.com/tavernww
![Living Tree](http://resinclad.com/cdn/shop/products/LivingTree_1072x1072_Main_375x.png?v=1631209995 375w,//resinclad.com/cdn/shop/products/LivingTree_1072x1072_Main_410x.png?v=1631209995 410w,//resinclad.com/cdn/shop/products/LivingTree_1072x1072_Main_520x.png?v=1631209995 520w,//resinclad.com/cdn/shop/products/LivingTree_1072x1072_Main_576x.png?v=1631209995 576w,//resinclad.com/cdn/shop/products/LivingTree_1072x1072_Main_768x.png?v=1631209995 768w,//resinclad.com/cdn/shop/products/LivingTree_1072x1072_Main_992x.png?v=1631209995 992w,//resinclad.com/cdn/shop/products/LivingTree_1072x1072_Main_1024x.png?v=1631209995 1024w,//resinclad.com/cdn/shop/products/LivingTree_1072x1072_Main_1280x.png?v=1631209995 1280w)
![Living Tree](http://resinclad.com/cdn/shop/products/LivingTree_1072x1072_2_375x.png?v=1631210026 375w,//resinclad.com/cdn/shop/products/LivingTree_1072x1072_2_410x.png?v=1631210026 410w,//resinclad.com/cdn/shop/products/LivingTree_1072x1072_2_520x.png?v=1631210026 520w,//resinclad.com/cdn/shop/products/LivingTree_1072x1072_2_576x.png?v=1631210026 576w,//resinclad.com/cdn/shop/products/LivingTree_1072x1072_2_768x.png?v=1631210026 768w,//resinclad.com/cdn/shop/products/LivingTree_1072x1072_2_992x.png?v=1631210026 992w,//resinclad.com/cdn/shop/products/LivingTree_1072x1072_2_1024x.png?v=1631210026 1024w,//resinclad.com/cdn/shop/products/LivingTree_1072x1072_2_1280x.png?v=1631210026 1280w)
Living Tree
from $17.49
Comes in 32mm scale
Approximate size: 67mm x 70mm x 80mm
Base Size: 75mm
Base Style: Plain
Like this model? Click here to check out the rest of our collection from White Werewolf Tavern
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
White Werewolf Tavern
@WWTavern
If you would like to follow or support this artist, please check out the links below.
patreon.com/whitewerewolftavern
www.instagram.com/wwtavern
myminifactory.com/users/WWTavern
facebook.com/miniatures3d
twitter.com/tavernww
![Llama](http://resinclad.com/cdn/shop/products/35_LLAMA_375x.jpg?v=1650042687 375w,//resinclad.com/cdn/shop/products/35_LLAMA_410x.jpg?v=1650042687 410w,//resinclad.com/cdn/shop/products/35_LLAMA_520x.jpg?v=1650042687 520w,//resinclad.com/cdn/shop/products/35_LLAMA_576x.jpg?v=1650042687 576w,//resinclad.com/cdn/shop/products/35_LLAMA_768x.jpg?v=1650042687 768w,//resinclad.com/cdn/shop/products/35_LLAMA_992x.jpg?v=1650042687 992w,//resinclad.com/cdn/shop/products/35_LLAMA_1024x.jpg?v=1650042687 1024w,//resinclad.com/cdn/shop/products/35_LLAMA_1280x.jpg?v=1650042687 1280w)
Llama
$7.99
Size: 24.5mm x 35.5mm x 28.5mm
Like this model? Click here to check out the rest of our collection from 3DIPStudios
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
3DIPStudios
@3DIPStudios
If you would like to follow or support this artist, please check out the link below.
instagram.com/3dipstudios
![Longhorn Cattle](http://resinclad.com/cdn/shop/products/46.LONGHORN_CATTLE_375x.jpg?v=1650044483 375w,//resinclad.com/cdn/shop/products/46.LONGHORN_CATTLE_410x.jpg?v=1650044483 410w,//resinclad.com/cdn/shop/products/46.LONGHORN_CATTLE_520x.jpg?v=1650044483 520w,//resinclad.com/cdn/shop/products/46.LONGHORN_CATTLE_576x.jpg?v=1650044483 576w,//resinclad.com/cdn/shop/products/46.LONGHORN_CATTLE_768x.jpg?v=1650044483 768w,//resinclad.com/cdn/shop/products/46.LONGHORN_CATTLE_992x.jpg?v=1650044483 992w,//resinclad.com/cdn/shop/products/46.LONGHORN_CATTLE_1024x.jpg?v=1650044483 1024w,//resinclad.com/cdn/shop/products/46.LONGHORN_CATTLE_1280x.jpg?v=1650044483 1280w)
Longhorn Cattle
$10.99
Size: 45mm x 37mm x 55mm
Like this model? Click here to check out the rest of our collection from 3DIPStudios
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
3DIPStudios
@3DIPStudios
If you would like to follow or support this artist, please check out the link below.
instagram.com/3dipstudios
![Loxodon Bundle](http://resinclad.com/cdn/shop/products/LoxodonBundle_375x.png?v=1632499805 375w,//resinclad.com/cdn/shop/products/LoxodonBundle_410x.png?v=1632499805 410w,//resinclad.com/cdn/shop/products/LoxodonBundle_520x.png?v=1632499805 520w,//resinclad.com/cdn/shop/products/LoxodonBundle_576x.png?v=1632499805 576w,//resinclad.com/cdn/shop/products/LoxodonBundle_768x.png?v=1632499805 768w,//resinclad.com/cdn/shop/products/LoxodonBundle_992x.png?v=1632499805 992w,//resinclad.com/cdn/shop/products/LoxodonBundle_1024x.png?v=1632499805 1024w,//resinclad.com/cdn/shop/products/LoxodonBundle_1280x.png?v=1632499805 1280w)
![Loxodon Bundle](http://resinclad.com/cdn/shop/products/LoxodonArtificer_66ef42ed-9630-47fb-98b1-b27fa9baf5c1_375x.png?v=1632499804 375w,//resinclad.com/cdn/shop/products/LoxodonArtificer_66ef42ed-9630-47fb-98b1-b27fa9baf5c1_410x.png?v=1632499804 410w,//resinclad.com/cdn/shop/products/LoxodonArtificer_66ef42ed-9630-47fb-98b1-b27fa9baf5c1_520x.png?v=1632499804 520w,//resinclad.com/cdn/shop/products/LoxodonArtificer_66ef42ed-9630-47fb-98b1-b27fa9baf5c1_576x.png?v=1632499804 576w,//resinclad.com/cdn/shop/products/LoxodonArtificer_66ef42ed-9630-47fb-98b1-b27fa9baf5c1_768x.png?v=1632499804 768w,//resinclad.com/cdn/shop/products/LoxodonArtificer_66ef42ed-9630-47fb-98b1-b27fa9baf5c1_992x.png?v=1632499804 992w,//resinclad.com/cdn/shop/products/LoxodonArtificer_66ef42ed-9630-47fb-98b1-b27fa9baf5c1_1024x.png?v=1632499804 1024w,//resinclad.com/cdn/shop/products/LoxodonArtificer_66ef42ed-9630-47fb-98b1-b27fa9baf5c1_1280x.png?v=1632499804 1280w)
Loxodon Bundle
from $11.99
Model Size:
Loxodon Artificer - 36mm x 60mm x 98mm
Loxodon Barbarian - 75.5mm x 61.5mm x 58.5mm
Loxodon Bard - 59mm x 58mm x 42.5mm
Loxodon Fighter - 75mm x 45mm x 41mm
Loxodon Paladin - 46mm x 65mm x 46.5mm
Loxodon Ranger - 69mm x 50mm x 62mm
Loxodon Wizard - 65mm x 57mm 35mm
Base Size: 35mm
Base Style: Plain
Bundle includes all 7 models
The Loxodon Artificer is a modular piece and you can select which weapon / attachment you would like him to have. If you do not leave me a note with which weapon set you would like then you will receive the model with the the weapon set pictured in the render (Flamethrower/Drill).
WEAPON / ATTACHMENT
Flamethrower / Chainsaw
Flamethrower / Drill
Gatling Gun / Chainsaw
Gatlin Gun / Drill
Like this model? Click here to check out the rest of our collection from Manuel Boria
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Manuel Boria
@ManuelBoria
If you would like to follow or support this artist, please check out the links below.
patreon.com/ManuelBoria
myminifactory.com/users/Manuel_Boria
![Lumpkin Bundle](http://resinclad.com/cdn/shop/products/LumpkinBundle_375x.png?v=1634157614 375w,//resinclad.com/cdn/shop/products/LumpkinBundle_410x.png?v=1634157614 410w,//resinclad.com/cdn/shop/products/LumpkinBundle_520x.png?v=1634157614 520w,//resinclad.com/cdn/shop/products/LumpkinBundle_576x.png?v=1634157614 576w,//resinclad.com/cdn/shop/products/LumpkinBundle_768x.png?v=1634157614 768w,//resinclad.com/cdn/shop/products/LumpkinBundle_992x.png?v=1634157614 992w,//resinclad.com/cdn/shop/products/LumpkinBundle_1024x.png?v=1634157614 1024w,//resinclad.com/cdn/shop/products/LumpkinBundle_1280x.png?v=1634157614 1280w)
![Lumpkin Bundle](http://resinclad.com/cdn/shop/products/Lumpkin1_375x.png?v=1634157613 375w,//resinclad.com/cdn/shop/products/Lumpkin1_410x.png?v=1634157613 410w,//resinclad.com/cdn/shop/products/Lumpkin1_520x.png?v=1634157613 520w,//resinclad.com/cdn/shop/products/Lumpkin1_576x.png?v=1634157613 576w,//resinclad.com/cdn/shop/products/Lumpkin1_768x.png?v=1634157613 768w,//resinclad.com/cdn/shop/products/Lumpkin1_992x.png?v=1634157613 992w,//resinclad.com/cdn/shop/products/Lumpkin1_1024x.png?v=1634157613 1024w,//resinclad.com/cdn/shop/products/Lumpkin1_1280x.png?v=1634157613 1280w)
Lumpkin Bundle
from $6.49
Base Size: 25mm
Base Style: Haunted Cobblestone Base
Bundle includes all 4 models
Like this model? Click here to check out the rest of our collection from Goon Master Games
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Goon Master Games
@GoonMasterGames
If you would like to follow or support this artist, please check out the links below.
patreon.com/GoonMasterGames
instagram.com/GoonMasterGames
myminifactory.com/users/GoonMasterGames
![Lumpkin Scarecrow Bundle](http://resinclad.com/cdn/shop/products/resize-lumpkinscarecrowbundle1_375x.jpg?v=1670353870 375w,//resinclad.com/cdn/shop/products/resize-lumpkinscarecrowbundle1_410x.jpg?v=1670353870 410w,//resinclad.com/cdn/shop/products/resize-lumpkinscarecrowbundle1_520x.jpg?v=1670353870 520w,//resinclad.com/cdn/shop/products/resize-lumpkinscarecrowbundle1_576x.jpg?v=1670353870 576w,//resinclad.com/cdn/shop/products/resize-lumpkinscarecrowbundle1_768x.jpg?v=1670353870 768w,//resinclad.com/cdn/shop/products/resize-lumpkinscarecrowbundle1_992x.jpg?v=1670353870 992w,//resinclad.com/cdn/shop/products/resize-lumpkinscarecrowbundle1_1024x.jpg?v=1670353870 1024w,//resinclad.com/cdn/shop/products/resize-lumpkinscarecrowbundle1_1280x.jpg?v=1670353870 1280w)
![Lumpkin Scarecrow Bundle](http://resinclad.com/cdn/shop/products/resize-lumpkinscarecrowbundle2_375x.jpg?v=1670354314 375w,//resinclad.com/cdn/shop/products/resize-lumpkinscarecrowbundle2_410x.jpg?v=1670354314 410w,//resinclad.com/cdn/shop/products/resize-lumpkinscarecrowbundle2_520x.jpg?v=1670354314 520w,//resinclad.com/cdn/shop/products/resize-lumpkinscarecrowbundle2_576x.jpg?v=1670354314 576w,//resinclad.com/cdn/shop/products/resize-lumpkinscarecrowbundle2_768x.jpg?v=1670354314 768w,//resinclad.com/cdn/shop/products/resize-lumpkinscarecrowbundle2_992x.jpg?v=1670354314 992w,//resinclad.com/cdn/shop/products/resize-lumpkinscarecrowbundle2_1024x.jpg?v=1670354314 1024w,//resinclad.com/cdn/shop/products/resize-lumpkinscarecrowbundle2_1280x.jpg?v=1670354314 1280w)
Lumpkin Scarecrow Bundle
from $6.24
Base Size: 25mm
Base Style: Haunted Cobblestone Base
Bundle includes all 3 models
Like this model? Click here to check out the rest of our collection from Goon Master Games
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Goon Master Games
@GoonMasterGames
If you would like to follow or support this artist, please check out the links below.
patreon.com/GoonMasterGames
instagram.com/GoonMasterGames
myminifactory.com/users/GoonMasterGames
![Lynx](http://resinclad.com/cdn/shop/products/16_LYNX_375x.jpg?v=1650039191 375w,//resinclad.com/cdn/shop/products/16_LYNX_410x.jpg?v=1650039191 410w,//resinclad.com/cdn/shop/products/16_LYNX_520x.jpg?v=1650039191 520w,//resinclad.com/cdn/shop/products/16_LYNX_576x.jpg?v=1650039191 576w,//resinclad.com/cdn/shop/products/16_LYNX_768x.jpg?v=1650039191 768w,//resinclad.com/cdn/shop/products/16_LYNX_992x.jpg?v=1650039191 992w,//resinclad.com/cdn/shop/products/16_LYNX_1024x.jpg?v=1650039191 1024w,//resinclad.com/cdn/shop/products/16_LYNX_1280x.jpg?v=1650039191 1280w)
Lynx
$5.99
Size: 22.5mm x 23mm x 33mm
Like this model? Click here to check out the rest of our collection from 3DIPStudios
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
3DIPStudios
@3DIPStudios
If you would like to follow or support this artist, please check out the link below.
instagram.com/3dipstudios
![Magic Cat Bundle](http://resinclad.com/cdn/shop/products/resize-magiccatbundle_375x.jpg?v=1670350832 375w,//resinclad.com/cdn/shop/products/resize-magiccatbundle_410x.jpg?v=1670350832 410w,//resinclad.com/cdn/shop/products/resize-magiccatbundle_520x.jpg?v=1670350832 520w,//resinclad.com/cdn/shop/products/resize-magiccatbundle_576x.jpg?v=1670350832 576w,//resinclad.com/cdn/shop/products/resize-magiccatbundle_768x.jpg?v=1670350832 768w,//resinclad.com/cdn/shop/products/resize-magiccatbundle_992x.jpg?v=1670350832 992w,//resinclad.com/cdn/shop/products/resize-magiccatbundle_1024x.jpg?v=1670350832 1024w,//resinclad.com/cdn/shop/products/resize-magiccatbundle_1280x.jpg?v=1670350832 1280w)
![Magic Cat Bundle](http://resinclad.com/cdn/shop/products/MagicCat1_375x.png?v=1670350834 375w,//resinclad.com/cdn/shop/products/MagicCat1_410x.png?v=1670350834 410w,//resinclad.com/cdn/shop/products/MagicCat1_520x.png?v=1670350834 520w,//resinclad.com/cdn/shop/products/MagicCat1_576x.png?v=1670350834 576w,//resinclad.com/cdn/shop/products/MagicCat1_768x.png?v=1670350834 768w,//resinclad.com/cdn/shop/products/MagicCat1_992x.png?v=1670350834 992w,//resinclad.com/cdn/shop/products/MagicCat1_1024x.png?v=1670350834 1024w,//resinclad.com/cdn/shop/products/MagicCat1_1280x.png?v=1670350834 1280w)
Magic Cat Bundle
from $5.99
Base Size: 25mm
Base Style: Slate Rock
Bundle includes all 3 models
Like this model? Click here to check out the rest of our collection from Goon Master Games
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Goon Master Games
@GoonMasterGames
If you would like to follow or support this artist, please check out the links below.
patreon.com/GoonMasterGames
instagram.com/GoonMasterGames
myminifactory.com/users/GoonMasterGames
![Maletta Crow Mother - Bust](http://resinclad.com/cdn/shop/products/inst_Maletta_bust_1_375x.jpg?v=1631213396 375w,//resinclad.com/cdn/shop/products/inst_Maletta_bust_1_410x.jpg?v=1631213396 410w,//resinclad.com/cdn/shop/products/inst_Maletta_bust_1_520x.jpg?v=1631213396 520w,//resinclad.com/cdn/shop/products/inst_Maletta_bust_1_576x.jpg?v=1631213396 576w,//resinclad.com/cdn/shop/products/inst_Maletta_bust_1_768x.jpg?v=1631213396 768w,//resinclad.com/cdn/shop/products/inst_Maletta_bust_1_992x.jpg?v=1631213396 992w,//resinclad.com/cdn/shop/products/inst_Maletta_bust_1_1024x.jpg?v=1631213396 1024w,//resinclad.com/cdn/shop/products/inst_Maletta_bust_1_1280x.jpg?v=1631213396 1280w)
![Maletta Crow Mother - Bust](http://resinclad.com/cdn/shop/products/inst_Maletta_bust_375x.jpg?v=1631213397 375w,//resinclad.com/cdn/shop/products/inst_Maletta_bust_410x.jpg?v=1631213397 410w,//resinclad.com/cdn/shop/products/inst_Maletta_bust_520x.jpg?v=1631213397 520w,//resinclad.com/cdn/shop/products/inst_Maletta_bust_576x.jpg?v=1631213397 576w,//resinclad.com/cdn/shop/products/inst_Maletta_bust_768x.jpg?v=1631213397 768w,//resinclad.com/cdn/shop/products/inst_Maletta_bust_992x.jpg?v=1631213397 992w,//resinclad.com/cdn/shop/products/inst_Maletta_bust_1024x.jpg?v=1631213397 1024w,//resinclad.com/cdn/shop/products/inst_Maletta_bust_1280x.jpg?v=1631213397 1280w)
Maletta Crow Mother - Bust
$20.99
Model is approximately 92mm tall excluding the stand.
As time marches forward, leading all creatures to their inevitable death, the Mother of Crows waits patiently to aid lost souls in finding their way into the afterlife. Ever vigilant she remains, unwavering in her mission, seeking to bring comfort to those whose time has come to an end. Those who near death feel the warmth get sucked out of their bodies, right down to the bones, as their vision slowly softens, as though being covered by a thin veil of smoke. Among the distant cawing of crows, echoes the soft sound of a thurible peacefully chiming in the distance, growing ever closer.
Like this model? Click here to check out the rest of our collection from White Werewolf Tavern
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
White Werewolf Tavern
@WWTavern
If you would like to follow or support this artist, please check out the links below.
patreon.com/whitewerewolftavern
www.instagram.com/wwtavern
myminifactory.com/users/WWTavern
facebook.com/miniatures3d
twitter.com/tavernww
![Mammoth](http://resinclad.com/cdn/shop/products/24_MAMMOTH_375x.jpg?v=1650042089 375w,//resinclad.com/cdn/shop/products/24_MAMMOTH_410x.jpg?v=1650042089 410w,//resinclad.com/cdn/shop/products/24_MAMMOTH_520x.jpg?v=1650042089 520w,//resinclad.com/cdn/shop/products/24_MAMMOTH_576x.jpg?v=1650042089 576w,//resinclad.com/cdn/shop/products/24_MAMMOTH_768x.jpg?v=1650042089 768w,//resinclad.com/cdn/shop/products/24_MAMMOTH_992x.jpg?v=1650042089 992w,//resinclad.com/cdn/shop/products/24_MAMMOTH_1024x.jpg?v=1650042089 1024w,//resinclad.com/cdn/shop/products/24_MAMMOTH_1280x.jpg?v=1650042089 1280w)
Mammoth
$34.99
Size: 91.5mm x 72mm x 114.5mm
Like this model? Click here to check out the rest of our collection from 3DIPStudios
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
3DIPStudios
@3DIPStudios
If you would like to follow or support this artist, please check out the link below.
instagram.com/3dipstudios
![Meerkat](http://resinclad.com/cdn/shop/files/MEERKAT_375x.png?v=1689362302 375w,//resinclad.com/cdn/shop/files/MEERKAT_410x.png?v=1689362302 410w,//resinclad.com/cdn/shop/files/MEERKAT_520x.png?v=1689362302 520w,//resinclad.com/cdn/shop/files/MEERKAT_576x.png?v=1689362302 576w,//resinclad.com/cdn/shop/files/MEERKAT_768x.png?v=1689362302 768w,//resinclad.com/cdn/shop/files/MEERKAT_992x.png?v=1689362302 992w,//resinclad.com/cdn/shop/files/MEERKAT_1024x.png?v=1689362302 1024w,//resinclad.com/cdn/shop/files/MEERKAT_1280x.png?v=1689362302 1280w)
Meerkat
$3.99
32mm Scale
Approximate Size: 14.5mm x 7mm x 24.5mm
Base not included
Like this model? Click here to check out the rest of our collection from 3DIPStudios
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
3DIPStudios
@3DIPStudios
If you would like to follow or support this artist, please check out the link below.
instagram.com/3dipstudios
![Meerkat Spearman Bundle](http://resinclad.com/cdn/shop/files/MeerkatSpearmanWithTurbanBundle_375x.png?v=1691524554 375w,//resinclad.com/cdn/shop/files/MeerkatSpearmanWithTurbanBundle_410x.png?v=1691524554 410w,//resinclad.com/cdn/shop/files/MeerkatSpearmanWithTurbanBundle_520x.png?v=1691524554 520w,//resinclad.com/cdn/shop/files/MeerkatSpearmanWithTurbanBundle_576x.png?v=1691524554 576w,//resinclad.com/cdn/shop/files/MeerkatSpearmanWithTurbanBundle_768x.png?v=1691524554 768w,//resinclad.com/cdn/shop/files/MeerkatSpearmanWithTurbanBundle_992x.png?v=1691524554 992w,//resinclad.com/cdn/shop/files/MeerkatSpearmanWithTurbanBundle_1024x.png?v=1691524554 1024w,//resinclad.com/cdn/shop/files/MeerkatSpearmanWithTurbanBundle_1280x.png?v=1691524554 1280w)
![Meerkat Spearman Bundle](http://resinclad.com/cdn/shop/files/MeerkatSpearmanNoTurbanBundle_375x.png?v=1691524556 375w,//resinclad.com/cdn/shop/files/MeerkatSpearmanNoTurbanBundle_410x.png?v=1691524556 410w,//resinclad.com/cdn/shop/files/MeerkatSpearmanNoTurbanBundle_520x.png?v=1691524556 520w,//resinclad.com/cdn/shop/files/MeerkatSpearmanNoTurbanBundle_576x.png?v=1691524556 576w,//resinclad.com/cdn/shop/files/MeerkatSpearmanNoTurbanBundle_768x.png?v=1691524556 768w,//resinclad.com/cdn/shop/files/MeerkatSpearmanNoTurbanBundle_992x.png?v=1691524556 992w,//resinclad.com/cdn/shop/files/MeerkatSpearmanNoTurbanBundle_1024x.png?v=1691524556 1024w,//resinclad.com/cdn/shop/files/MeerkatSpearmanNoTurbanBundle_1280x.png?v=1691524556 1280w)
Meerkat Spearman Bundle
from $7.99
Base Size: 25mm
Base Style: Patterned Brick Base
Comes in 32mm scale
Bundle includes all 5 models
Like this model? Click here to check out the rest of our collection from Goon Master Games
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Goon Master Games
@GoonMasterGames
If you would like to follow or support this artist, please check out the links below.
patreon.com/GoonMasterGames
instagram.com/GoonMasterGames
myminifactory.com/users/GoonMasterGames
![Megalodon](http://resinclad.com/cdn/shop/products/MEGALODON_375x.jpg?v=1634761578 375w,//resinclad.com/cdn/shop/products/MEGALODON_410x.jpg?v=1634761578 410w,//resinclad.com/cdn/shop/products/MEGALODON_520x.jpg?v=1634761578 520w,//resinclad.com/cdn/shop/products/MEGALODON_576x.jpg?v=1634761578 576w,//resinclad.com/cdn/shop/products/MEGALODON_768x.jpg?v=1634761578 768w,//resinclad.com/cdn/shop/products/MEGALODON_992x.jpg?v=1634761578 992w,//resinclad.com/cdn/shop/products/MEGALODON_1024x.jpg?v=1634761578 1024w,//resinclad.com/cdn/shop/products/MEGALODON_1280x.jpg?v=1634761578 1280w)
Megalodon
from $19.99
Size: 108mm x 74mm x 71mm
Base Size: 83.5mm x 75mm
Base Style: Plain Oval
Like this model? Click here to check out the rest of our collection from 3DIPStudios
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
3DIPStudios
@3DIPStudios
If you would like to follow or support this artist, please check out the link below.
instagram.com/3dipstudios
![Mereith The Druid](http://resinclad.com/cdn/shop/products/MereithTheDruid_CastNPlay_375x.png?v=1646232190 375w,//resinclad.com/cdn/shop/products/MereithTheDruid_CastNPlay_410x.png?v=1646232190 410w,//resinclad.com/cdn/shop/products/MereithTheDruid_CastNPlay_520x.png?v=1646232190 520w,//resinclad.com/cdn/shop/products/MereithTheDruid_CastNPlay_576x.png?v=1646232190 576w,//resinclad.com/cdn/shop/products/MereithTheDruid_CastNPlay_768x.png?v=1646232190 768w,//resinclad.com/cdn/shop/products/MereithTheDruid_CastNPlay_992x.png?v=1646232190 992w,//resinclad.com/cdn/shop/products/MereithTheDruid_CastNPlay_1024x.png?v=1646232190 1024w,//resinclad.com/cdn/shop/products/MereithTheDruid_CastNPlay_1280x.png?v=1646232190 1280w)
Mereith The Druid
from $6.99
Base Size: 25mm
Base Style: Hero Base
Bundle includes all 6 models
Like this model? Click here to check out the rest of our collection from Cast n Play
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Cast n Play
@CastnPlay
If you would like to follow or support this artist, please check out the links below.
patreon.com/CastnPlay
instagram.com/CastnPlay
myminifactory.com/users/CastnPlay
facebook.com/CastnPlayMinis
youtube.com/castnplay
![Mimic Grave & Grave](http://resinclad.com/cdn/shop/products/Mimic_Grave_1_375x.jpg?v=1661888140 375w,//resinclad.com/cdn/shop/products/Mimic_Grave_1_410x.jpg?v=1661888140 410w,//resinclad.com/cdn/shop/products/Mimic_Grave_1_520x.jpg?v=1661888140 520w,//resinclad.com/cdn/shop/products/Mimic_Grave_1_576x.jpg?v=1661888140 576w,//resinclad.com/cdn/shop/products/Mimic_Grave_1_768x.jpg?v=1661888140 768w,//resinclad.com/cdn/shop/products/Mimic_Grave_1_992x.jpg?v=1661888140 992w,//resinclad.com/cdn/shop/products/Mimic_Grave_1_1024x.jpg?v=1661888140 1024w,//resinclad.com/cdn/shop/products/Mimic_Grave_1_1280x.jpg?v=1661888140 1280w)
![Mimic Grave & Grave](http://resinclad.com/cdn/shop/products/Mimic_Grave_3_375x.jpg?v=1661888146 375w,//resinclad.com/cdn/shop/products/Mimic_Grave_3_410x.jpg?v=1661888146 410w,//resinclad.com/cdn/shop/products/Mimic_Grave_3_520x.jpg?v=1661888146 520w,//resinclad.com/cdn/shop/products/Mimic_Grave_3_576x.jpg?v=1661888146 576w,//resinclad.com/cdn/shop/products/Mimic_Grave_3_768x.jpg?v=1661888146 768w,//resinclad.com/cdn/shop/products/Mimic_Grave_3_992x.jpg?v=1661888146 992w,//resinclad.com/cdn/shop/products/Mimic_Grave_3_1024x.jpg?v=1661888146 1024w,//resinclad.com/cdn/shop/products/Mimic_Grave_3_1280x.jpg?v=1661888146 1280w)
Mimic Grave & Grave
$9.99
Comes in 32mm scale
Includes both models
Like this model? Click here to check out the rest of our collection from White Werewolf Tavern
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
White Werewolf Tavern
@WWTavern
If you would like to follow or support this artist, please check out the links below.
patreon.com/whitewerewolftavern
www.instagram.com/wwtavern
myminifactory.com/users/WWTavern
facebook.com/miniatures3d
twitter.com/tavernww
![Mimic Stump & Stump](http://resinclad.com/cdn/shop/products/inst_Mimicstump3_375x.png?v=1631288593 375w,//resinclad.com/cdn/shop/products/inst_Mimicstump3_410x.png?v=1631288593 410w,//resinclad.com/cdn/shop/products/inst_Mimicstump3_520x.png?v=1631288593 520w,//resinclad.com/cdn/shop/products/inst_Mimicstump3_576x.png?v=1631288593 576w,//resinclad.com/cdn/shop/products/inst_Mimicstump3_768x.png?v=1631288593 768w,//resinclad.com/cdn/shop/products/inst_Mimicstump3_992x.png?v=1631288593 992w,//resinclad.com/cdn/shop/products/inst_Mimicstump3_1024x.png?v=1631288593 1024w,//resinclad.com/cdn/shop/products/inst_Mimicstump3_1280x.png?v=1631288593 1280w)
![Mimic Stump & Stump](http://resinclad.com/cdn/shop/products/inst_Mimicstump_375x.png?v=1631288593 375w,//resinclad.com/cdn/shop/products/inst_Mimicstump_410x.png?v=1631288593 410w,//resinclad.com/cdn/shop/products/inst_Mimicstump_520x.png?v=1631288593 520w,//resinclad.com/cdn/shop/products/inst_Mimicstump_576x.png?v=1631288593 576w,//resinclad.com/cdn/shop/products/inst_Mimicstump_768x.png?v=1631288593 768w,//resinclad.com/cdn/shop/products/inst_Mimicstump_992x.png?v=1631288593 992w,//resinclad.com/cdn/shop/products/inst_Mimicstump_1024x.png?v=1631288593 1024w,//resinclad.com/cdn/shop/products/inst_Mimicstump_1280x.png?v=1631288593 1280w)
Mimic Stump & Stump
from $8.99
Comes in 32mm scale
Base Size: 35mm
Base Style: Plain
Includes both models
Like this model? Click here to check out the rest of our collection from White Werewolf Tavern
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
White Werewolf Tavern
@WWTavern
If you would like to follow or support this artist, please check out the links below.
patreon.com/whitewerewolftavern
www.instagram.com/wwtavern
myminifactory.com/users/WWTavern
facebook.com/miniatures3d
twitter.com/tavernww
![Mimic Tree](http://resinclad.com/cdn/shop/products/MimicNightmares-Tree_full_375x.png?v=1678824651 375w,//resinclad.com/cdn/shop/products/MimicNightmares-Tree_full_410x.png?v=1678824651 410w,//resinclad.com/cdn/shop/products/MimicNightmares-Tree_full_520x.png?v=1678824651 520w,//resinclad.com/cdn/shop/products/MimicNightmares-Tree_full_576x.png?v=1678824651 576w,//resinclad.com/cdn/shop/products/MimicNightmares-Tree_full_768x.png?v=1678824651 768w,//resinclad.com/cdn/shop/products/MimicNightmares-Tree_full_992x.png?v=1678824651 992w,//resinclad.com/cdn/shop/products/MimicNightmares-Tree_full_1024x.png?v=1678824651 1024w,//resinclad.com/cdn/shop/products/MimicNightmares-Tree_full_1280x.png?v=1678824651 1280w)
![Mimic Tree](http://resinclad.com/cdn/shop/products/MimicNightmares-TreeMimic_375x.png?v=1678824654 375w,//resinclad.com/cdn/shop/products/MimicNightmares-TreeMimic_410x.png?v=1678824654 410w,//resinclad.com/cdn/shop/products/MimicNightmares-TreeMimic_520x.png?v=1678824654 520w,//resinclad.com/cdn/shop/products/MimicNightmares-TreeMimic_576x.png?v=1678824654 576w,//resinclad.com/cdn/shop/products/MimicNightmares-TreeMimic_768x.png?v=1678824654 768w,//resinclad.com/cdn/shop/products/MimicNightmares-TreeMimic_992x.png?v=1678824654 992w,//resinclad.com/cdn/shop/products/MimicNightmares-TreeMimic_1024x.png?v=1678824654 1024w,//resinclad.com/cdn/shop/products/MimicNightmares-TreeMimic_1280x.png?v=1678824654 1280w)
Mimic Tree
$19.99
32mm Scale
Includes both models
Like this model? Click here to check out the rest of our collection from
Black Skull Studio
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Black Skull Studio
@BlackSkullStudio
If you would like to follow or support this artist, please check out the link below.
instagram.com/blackskull.studio
twitter.com/BlackSkullMX
![Mimic Wooden Box](http://resinclad.com/cdn/shop/products/MimicNightmares-WoodenBoxComplete_375x.png?v=1678824773 375w,//resinclad.com/cdn/shop/products/MimicNightmares-WoodenBoxComplete_410x.png?v=1678824773 410w,//resinclad.com/cdn/shop/products/MimicNightmares-WoodenBoxComplete_520x.png?v=1678824773 520w,//resinclad.com/cdn/shop/products/MimicNightmares-WoodenBoxComplete_576x.png?v=1678824773 576w,//resinclad.com/cdn/shop/products/MimicNightmares-WoodenBoxComplete_768x.png?v=1678824773 768w,//resinclad.com/cdn/shop/products/MimicNightmares-WoodenBoxComplete_992x.png?v=1678824773 992w,//resinclad.com/cdn/shop/products/MimicNightmares-WoodenBoxComplete_1024x.png?v=1678824773 1024w,//resinclad.com/cdn/shop/products/MimicNightmares-WoodenBoxComplete_1280x.png?v=1678824773 1280w)
![Mimic Wooden Box](http://resinclad.com/cdn/shop/products/MimicNightmares-WoodenBoxMimic_375x.png?v=1678824775 375w,//resinclad.com/cdn/shop/products/MimicNightmares-WoodenBoxMimic_410x.png?v=1678824775 410w,//resinclad.com/cdn/shop/products/MimicNightmares-WoodenBoxMimic_520x.png?v=1678824775 520w,//resinclad.com/cdn/shop/products/MimicNightmares-WoodenBoxMimic_576x.png?v=1678824775 576w,//resinclad.com/cdn/shop/products/MimicNightmares-WoodenBoxMimic_768x.png?v=1678824775 768w,//resinclad.com/cdn/shop/products/MimicNightmares-WoodenBoxMimic_992x.png?v=1678824775 992w,//resinclad.com/cdn/shop/products/MimicNightmares-WoodenBoxMimic_1024x.png?v=1678824775 1024w,//resinclad.com/cdn/shop/products/MimicNightmares-WoodenBoxMimic_1280x.png?v=1678824775 1280w)
Mimic Wooden Box
$9.49
32mm Scale
Includes both models
Like this model? Click here to check out the rest of our collection from
Black Skull Studio
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
Black Skull Studio
@BlackSkullStudio
If you would like to follow or support this artist, please check out the link below.
instagram.com/blackskull.studio
twitter.com/BlackSkullMX
![Minotaur - Bust](http://resinclad.com/cdn/shop/products/il_1140xN.2988258985_fylr_375x.jpg?v=1631289015 375w,//resinclad.com/cdn/shop/products/il_1140xN.2988258985_fylr_410x.jpg?v=1631289015 410w,//resinclad.com/cdn/shop/products/il_1140xN.2988258985_fylr_520x.jpg?v=1631289015 520w,//resinclad.com/cdn/shop/products/il_1140xN.2988258985_fylr_576x.jpg?v=1631289015 576w,//resinclad.com/cdn/shop/products/il_1140xN.2988258985_fylr_768x.jpg?v=1631289015 768w,//resinclad.com/cdn/shop/products/il_1140xN.2988258985_fylr_992x.jpg?v=1631289015 992w,//resinclad.com/cdn/shop/products/il_1140xN.2988258985_fylr_1024x.jpg?v=1631289015 1024w,//resinclad.com/cdn/shop/products/il_1140xN.2988258985_fylr_1280x.jpg?v=1631289015 1280w)
![Minotaur - Bust](http://resinclad.com/cdn/shop/products/1_d7ea750b-ff54-4129-9939-c6a07dcbec01_375x.jpg?v=1631289016 375w,//resinclad.com/cdn/shop/products/1_d7ea750b-ff54-4129-9939-c6a07dcbec01_410x.jpg?v=1631289016 410w,//resinclad.com/cdn/shop/products/1_d7ea750b-ff54-4129-9939-c6a07dcbec01_520x.jpg?v=1631289016 520w,//resinclad.com/cdn/shop/products/1_d7ea750b-ff54-4129-9939-c6a07dcbec01_576x.jpg?v=1631289016 576w,//resinclad.com/cdn/shop/products/1_d7ea750b-ff54-4129-9939-c6a07dcbec01_768x.jpg?v=1631289016 768w,//resinclad.com/cdn/shop/products/1_d7ea750b-ff54-4129-9939-c6a07dcbec01_992x.jpg?v=1631289016 992w,//resinclad.com/cdn/shop/products/1_d7ea750b-ff54-4129-9939-c6a07dcbec01_1024x.jpg?v=1631289016 1024w,//resinclad.com/cdn/shop/products/1_d7ea750b-ff54-4129-9939-c6a07dcbec01_1280x.jpg?v=1631289016 1280w)
Minotaur - Bust
$20.99
Model is approximately 80mm tall excluding the stand.
Like this model? Click here to check out the rest of our collection from White Werewolf Tavern
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
White Werewolf Tavern
@WWTavern
If you would like to follow or support this artist, please check out the links below.
patreon.com/whitewerewolftavern
www.instagram.com/wwtavern
myminifactory.com/users/WWTavern
facebook.com/miniatures3d
twitter.com/tavernww