![Bison](http://resinclad.com/cdn/shop/products/37_BISON_375x.jpg?v=1650042894 375w,//resinclad.com/cdn/shop/products/37_BISON_410x.jpg?v=1650042894 410w,//resinclad.com/cdn/shop/products/37_BISON_520x.jpg?v=1650042894 520w,//resinclad.com/cdn/shop/products/37_BISON_576x.jpg?v=1650042894 576w,//resinclad.com/cdn/shop/products/37_BISON_768x.jpg?v=1650042894 768w,//resinclad.com/cdn/shop/products/37_BISON_992x.jpg?v=1650042894 992w,//resinclad.com/cdn/shop/products/37_BISON_1024x.jpg?v=1650042894 1024w,//resinclad.com/cdn/shop/products/37_BISON_1280x.jpg?v=1650042894 1280w)
Bison
$5.99
Size: 47.5mm x 37mm x 59mm
Like this model? Click here to check out the rest of our collection from 3DIPStudios
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
3DIPStudios
@3DIPStudios
If you would like to follow or support this artist, please check out the link below.
instagram.com/3dipstudios
![Buffaloes](http://resinclad.com/cdn/shop/products/BuffaloBundle_375x.jpg?v=1650041041 375w,//resinclad.com/cdn/shop/products/BuffaloBundle_410x.jpg?v=1650041041 410w,//resinclad.com/cdn/shop/products/BuffaloBundle_520x.jpg?v=1650041041 520w,//resinclad.com/cdn/shop/products/BuffaloBundle_576x.jpg?v=1650041041 576w,//resinclad.com/cdn/shop/products/BuffaloBundle_768x.jpg?v=1650041041 768w,//resinclad.com/cdn/shop/products/BuffaloBundle_992x.jpg?v=1650041041 992w,//resinclad.com/cdn/shop/products/BuffaloBundle_1024x.jpg?v=1650041041 1024w,//resinclad.com/cdn/shop/products/BuffaloBundle_1280x.jpg?v=1650041041 1280w)
![Buffaloes](http://resinclad.com/cdn/shop/products/34_BUFFALO_375x.jpg?v=1650041044 375w,//resinclad.com/cdn/shop/products/34_BUFFALO_410x.jpg?v=1650041044 410w,//resinclad.com/cdn/shop/products/34_BUFFALO_520x.jpg?v=1650041044 520w,//resinclad.com/cdn/shop/products/34_BUFFALO_576x.jpg?v=1650041044 576w,//resinclad.com/cdn/shop/products/34_BUFFALO_768x.jpg?v=1650041044 768w,//resinclad.com/cdn/shop/products/34_BUFFALO_992x.jpg?v=1650041044 992w,//resinclad.com/cdn/shop/products/34_BUFFALO_1024x.jpg?v=1650041044 1024w,//resinclad.com/cdn/shop/products/34_BUFFALO_1280x.jpg?v=1650041044 1280w)
Buffaloes
from $9.99
Size:
Buffalo 1 - 46mm x 30.5mm x 51.5mm
Buffalo 2 - 38mm x 33.5mm x 41.5mm
Bundle includes both models
Like this model? Click here to check out the rest of our collection from 3DIPStudios
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
3DIPStudios
@3DIPStudios
If you would like to follow or support this artist, please check out the link below.
instagram.com/3dipstudios
![Cow](http://resinclad.com/cdn/shop/products/23_COW_375x.jpg?v=1650042000 375w,//resinclad.com/cdn/shop/products/23_COW_410x.jpg?v=1650042000 410w,//resinclad.com/cdn/shop/products/23_COW_520x.jpg?v=1650042000 520w,//resinclad.com/cdn/shop/products/23_COW_576x.jpg?v=1650042000 576w,//resinclad.com/cdn/shop/products/23_COW_768x.jpg?v=1650042000 768w,//resinclad.com/cdn/shop/products/23_COW_992x.jpg?v=1650042000 992w,//resinclad.com/cdn/shop/products/23_COW_1024x.jpg?v=1650042000 1024w,//resinclad.com/cdn/shop/products/23_COW_1280x.jpg?v=1650042000 1280w)
Cow
$8.99
Size: 32mm x 33mm x 47.5mm
Like this model? Click here to check out the rest of our collection from 3DIPStudios
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
3DIPStudios
@3DIPStudios
If you would like to follow or support this artist, please check out the link below.
instagram.com/3dipstudios
![Cow Bundle](http://resinclad.com/cdn/shop/files/CowBundle_375x.png?v=1689260024 375w,//resinclad.com/cdn/shop/files/CowBundle_410x.png?v=1689260024 410w,//resinclad.com/cdn/shop/files/CowBundle_520x.png?v=1689260024 520w,//resinclad.com/cdn/shop/files/CowBundle_576x.png?v=1689260024 576w,//resinclad.com/cdn/shop/files/CowBundle_768x.png?v=1689260024 768w,//resinclad.com/cdn/shop/files/CowBundle_992x.png?v=1689260024 992w,//resinclad.com/cdn/shop/files/CowBundle_1024x.png?v=1689260024 1024w,//resinclad.com/cdn/shop/files/CowBundle_1280x.png?v=1689260024 1280w)
![Cow Bundle](http://resinclad.com/cdn/shop/files/resize-cow_375x.jpg?v=1689260044 375w,//resinclad.com/cdn/shop/files/resize-cow_410x.jpg?v=1689260044 410w,//resinclad.com/cdn/shop/files/resize-cow_520x.jpg?v=1689260044 520w,//resinclad.com/cdn/shop/files/resize-cow_576x.jpg?v=1689260044 576w,//resinclad.com/cdn/shop/files/resize-cow_768x.jpg?v=1689260044 768w,//resinclad.com/cdn/shop/files/resize-cow_992x.jpg?v=1689260044 992w,//resinclad.com/cdn/shop/files/resize-cow_1024x.jpg?v=1689260044 1024w,//resinclad.com/cdn/shop/files/resize-cow_1280x.jpg?v=1689260044 1280w)
Cow Bundle
from $7.99
32mm ScaleSize:
Cow V1 - 60.75mm x 17.5mm x 30mm
Cow V2 - 55mm x 17mm x 28mm
Base not included
Bundle includes both models
Like this model? Click here to check out the rest of our collection from 3DIPStudios
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
3DIPStudios
@3DIPStudios
If you would like to follow or support this artist, please check out the link below.
instagram.com/3dipstudios
![Donkey](http://resinclad.com/cdn/shop/files/DONKEY_375x.png?v=1689364222 375w,//resinclad.com/cdn/shop/files/DONKEY_410x.png?v=1689364222 410w,//resinclad.com/cdn/shop/files/DONKEY_520x.png?v=1689364222 520w,//resinclad.com/cdn/shop/files/DONKEY_576x.png?v=1689364222 576w,//resinclad.com/cdn/shop/files/DONKEY_768x.png?v=1689364222 768w,//resinclad.com/cdn/shop/files/DONKEY_992x.png?v=1689364222 992w,//resinclad.com/cdn/shop/files/DONKEY_1024x.png?v=1689364222 1024w,//resinclad.com/cdn/shop/files/DONKEY_1280x.png?v=1689364222 1280w)
Donkey
$7.99
32mm Scale
Approximate Size: 43mm x 15.5mm x 35mm
Base not included
Like this model? Click here to check out the rest of our collection from 3DIPStudios
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
3DIPStudios
@3DIPStudios
If you would like to follow or support this artist, please check out the link below.
instagram.com/3dipstudios
![Ferret](http://resinclad.com/cdn/shop/products/47_FERRET_375x.jpg?v=1650044593 375w,//resinclad.com/cdn/shop/products/47_FERRET_410x.jpg?v=1650044593 410w,//resinclad.com/cdn/shop/products/47_FERRET_520x.jpg?v=1650044593 520w,//resinclad.com/cdn/shop/products/47_FERRET_576x.jpg?v=1650044593 576w,//resinclad.com/cdn/shop/products/47_FERRET_768x.jpg?v=1650044593 768w,//resinclad.com/cdn/shop/products/47_FERRET_992x.jpg?v=1650044593 992w,//resinclad.com/cdn/shop/products/47_FERRET_1024x.jpg?v=1650044593 1024w,//resinclad.com/cdn/shop/products/47_FERRET_1280x.jpg?v=1650044593 1280w)
Ferret
$4.99
Size: 12.5mm x 14mm x 33mm
Like this model? Click here to check out the rest of our collection from 3DIPStudios
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
3DIPStudios
@3DIPStudios
If you would like to follow or support this artist, please check out the link below.
instagram.com/3dipstudios
![Goat](http://resinclad.com/cdn/shop/files/resize-goat_375x.jpg?v=1689363490 375w,//resinclad.com/cdn/shop/files/resize-goat_410x.jpg?v=1689363490 410w,//resinclad.com/cdn/shop/files/resize-goat_520x.jpg?v=1689363490 520w,//resinclad.com/cdn/shop/files/resize-goat_576x.jpg?v=1689363490 576w,//resinclad.com/cdn/shop/files/resize-goat_768x.jpg?v=1689363490 768w,//resinclad.com/cdn/shop/files/resize-goat_992x.jpg?v=1689363490 992w,//resinclad.com/cdn/shop/files/resize-goat_1024x.jpg?v=1689363490 1024w,//resinclad.com/cdn/shop/files/resize-goat_1280x.jpg?v=1689363490 1280w)
Goat
$6.49
32mm Scale
Approximate Size: 33.5mm x 14.5mm x 25mm
Base not included
Like this model? Click here to check out the rest of our collection from 3DIPStudios
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
3DIPStudios
@3DIPStudios
If you would like to follow or support this artist, please check out the link below.
instagram.com/3dipstudios
![Goats](http://resinclad.com/cdn/shop/products/GoatBundle_375x.jpg?v=1650037915 375w,//resinclad.com/cdn/shop/products/GoatBundle_410x.jpg?v=1650037915 410w,//resinclad.com/cdn/shop/products/GoatBundle_520x.jpg?v=1650037915 520w,//resinclad.com/cdn/shop/products/GoatBundle_576x.jpg?v=1650037915 576w,//resinclad.com/cdn/shop/products/GoatBundle_768x.jpg?v=1650037915 768w,//resinclad.com/cdn/shop/products/GoatBundle_992x.jpg?v=1650037915 992w,//resinclad.com/cdn/shop/products/GoatBundle_1024x.jpg?v=1650037915 1024w,//resinclad.com/cdn/shop/products/GoatBundle_1280x.jpg?v=1650037915 1280w)
![Goats](http://resinclad.com/cdn/shop/products/Goat1_375x.jpg?v=1650037916 375w,//resinclad.com/cdn/shop/products/Goat1_410x.jpg?v=1650037916 410w,//resinclad.com/cdn/shop/products/Goat1_520x.jpg?v=1650037916 520w,//resinclad.com/cdn/shop/products/Goat1_576x.jpg?v=1650037916 576w,//resinclad.com/cdn/shop/products/Goat1_768x.jpg?v=1650037916 768w,//resinclad.com/cdn/shop/products/Goat1_992x.jpg?v=1650037916 992w,//resinclad.com/cdn/shop/products/Goat1_1024x.jpg?v=1650037916 1024w,//resinclad.com/cdn/shop/products/Goat1_1280x.jpg?v=1650037916 1280w)
Goats
from $5.99
Size:
Goat 1 -20mm x 27.5mm x 26.5mm
Goat 2 - 21mm x 34.5mm x 26mm
Bundle includes both models
Like this model? Click here to check out the rest of our collection from 3DIPStudios
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
3DIPStudios
@3DIPStudios
If you would like to follow or support this artist, please check out the link below.
instagram.com/3dipstudios
![Horse Bundle 2](http://resinclad.com/cdn/shop/files/HorseBundle_375x.png?v=1689259095 375w,//resinclad.com/cdn/shop/files/HorseBundle_410x.png?v=1689259095 410w,//resinclad.com/cdn/shop/files/HorseBundle_520x.png?v=1689259095 520w,//resinclad.com/cdn/shop/files/HorseBundle_576x.png?v=1689259095 576w,//resinclad.com/cdn/shop/files/HorseBundle_768x.png?v=1689259095 768w,//resinclad.com/cdn/shop/files/HorseBundle_992x.png?v=1689259095 992w,//resinclad.com/cdn/shop/files/HorseBundle_1024x.png?v=1689259095 1024w,//resinclad.com/cdn/shop/files/HorseBundle_1280x.png?v=1689259095 1280w)
![Horse Bundle 2](http://resinclad.com/cdn/shop/files/HORSE_375x.png?v=1689259097 375w,//resinclad.com/cdn/shop/files/HORSE_410x.png?v=1689259097 410w,//resinclad.com/cdn/shop/files/HORSE_520x.png?v=1689259097 520w,//resinclad.com/cdn/shop/files/HORSE_576x.png?v=1689259097 576w,//resinclad.com/cdn/shop/files/HORSE_768x.png?v=1689259097 768w,//resinclad.com/cdn/shop/files/HORSE_992x.png?v=1689259097 992w,//resinclad.com/cdn/shop/files/HORSE_1024x.png?v=1689259097 1024w,//resinclad.com/cdn/shop/files/HORSE_1280x.png?v=1689259097 1280w)
Horse Bundle 2
from $8.99
32mm ScaleSize:
Horse V1 - 45.5mm x 26.5mm x 40mm
Horse V2 - 44mm x 14.5mm x 53mm
Base not included
Bundle includes both models
Like this model? Click here to check out the rest of our collection from 3DIPStudios
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
3DIPStudios
@3DIPStudios
If you would like to follow or support this artist, please check out the link below.
instagram.com/3dipstudios
![Horses](http://resinclad.com/cdn/shop/products/HorseBundle_375x.jpg?v=1650038302 375w,//resinclad.com/cdn/shop/products/HorseBundle_410x.jpg?v=1650038302 410w,//resinclad.com/cdn/shop/products/HorseBundle_520x.jpg?v=1650038302 520w,//resinclad.com/cdn/shop/products/HorseBundle_576x.jpg?v=1650038302 576w,//resinclad.com/cdn/shop/products/HorseBundle_768x.jpg?v=1650038302 768w,//resinclad.com/cdn/shop/products/HorseBundle_992x.jpg?v=1650038302 992w,//resinclad.com/cdn/shop/products/HorseBundle_1024x.jpg?v=1650038302 1024w,//resinclad.com/cdn/shop/products/HorseBundle_1280x.jpg?v=1650038302 1280w)
![Horses](http://resinclad.com/cdn/shop/products/Horse1_375x.jpg?v=1650038322 375w,//resinclad.com/cdn/shop/products/Horse1_410x.jpg?v=1650038322 410w,//resinclad.com/cdn/shop/products/Horse1_520x.jpg?v=1650038322 520w,//resinclad.com/cdn/shop/products/Horse1_576x.jpg?v=1650038322 576w,//resinclad.com/cdn/shop/products/Horse1_768x.jpg?v=1650038322 768w,//resinclad.com/cdn/shop/products/Horse1_992x.jpg?v=1650038322 992w,//resinclad.com/cdn/shop/products/Horse1_1024x.jpg?v=1650038322 1024w,//resinclad.com/cdn/shop/products/Horse1_1280x.jpg?v=1650038322 1280w)
Horses
from $8.99
Size:
Horse 1 - 31mm x 42.5mm x 52mm
Horse 2 - 45mm x 51.5mm x 37.5mm
Horse 3 - 48mm x 39mm x 31.5mm
Horse 4 - 39.5mm x 44mm x 45mm
Bundle includes all 4 models
Like this model? Click here to check out the rest of our collection from 3DIPStudios
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
3DIPStudios
@3DIPStudios
If you would like to follow or support this artist, please check out the link below.
instagram.com/3dipstudios
![Llama](http://resinclad.com/cdn/shop/products/llama_375x.png?v=1649450354 375w,//resinclad.com/cdn/shop/products/llama_410x.png?v=1649450354 410w,//resinclad.com/cdn/shop/products/llama_520x.png?v=1649450354 520w,//resinclad.com/cdn/shop/products/llama_576x.png?v=1649450354 576w,//resinclad.com/cdn/shop/products/llama_768x.png?v=1649450354 768w,//resinclad.com/cdn/shop/products/llama_992x.png?v=1649450354 992w,//resinclad.com/cdn/shop/products/llama_1024x.png?v=1649450354 1024w,//resinclad.com/cdn/shop/products/llama_1280x.png?v=1649450354 1280w)
Llama
from $6.99
Base Size: 25mm
Base Style: Brick Base
Like this model? Click here to check out the rest of our collection from Goon Master Games
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC. is a licensed distributor of these 3D prints designed by:
Goon Master Games
@GoonMasterGames
If you would like to follow or support this artist, please check out the links below.
patreon.com/GoonMasterGames
instagram.com/GoonMasterGames
myminifactory.com/users/GoonMasterGames
![Llama](http://resinclad.com/cdn/shop/products/35_LLAMA_375x.jpg?v=1650042687 375w,//resinclad.com/cdn/shop/products/35_LLAMA_410x.jpg?v=1650042687 410w,//resinclad.com/cdn/shop/products/35_LLAMA_520x.jpg?v=1650042687 520w,//resinclad.com/cdn/shop/products/35_LLAMA_576x.jpg?v=1650042687 576w,//resinclad.com/cdn/shop/products/35_LLAMA_768x.jpg?v=1650042687 768w,//resinclad.com/cdn/shop/products/35_LLAMA_992x.jpg?v=1650042687 992w,//resinclad.com/cdn/shop/products/35_LLAMA_1024x.jpg?v=1650042687 1024w,//resinclad.com/cdn/shop/products/35_LLAMA_1280x.jpg?v=1650042687 1280w)
Llama
$7.99
Size: 24.5mm x 35.5mm x 28.5mm
Like this model? Click here to check out the rest of our collection from 3DIPStudios
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
3DIPStudios
@3DIPStudios
If you would like to follow or support this artist, please check out the link below.
instagram.com/3dipstudios
![Longhorn Cattle](http://resinclad.com/cdn/shop/products/46.LONGHORN_CATTLE_375x.jpg?v=1650044483 375w,//resinclad.com/cdn/shop/products/46.LONGHORN_CATTLE_410x.jpg?v=1650044483 410w,//resinclad.com/cdn/shop/products/46.LONGHORN_CATTLE_520x.jpg?v=1650044483 520w,//resinclad.com/cdn/shop/products/46.LONGHORN_CATTLE_576x.jpg?v=1650044483 576w,//resinclad.com/cdn/shop/products/46.LONGHORN_CATTLE_768x.jpg?v=1650044483 768w,//resinclad.com/cdn/shop/products/46.LONGHORN_CATTLE_992x.jpg?v=1650044483 992w,//resinclad.com/cdn/shop/products/46.LONGHORN_CATTLE_1024x.jpg?v=1650044483 1024w,//resinclad.com/cdn/shop/products/46.LONGHORN_CATTLE_1280x.jpg?v=1650044483 1280w)
Longhorn Cattle
$10.99
Size: 45mm x 37mm x 55mm
Like this model? Click here to check out the rest of our collection from 3DIPStudios
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
3DIPStudios
@3DIPStudios
If you would like to follow or support this artist, please check out the link below.
instagram.com/3dipstudios
![Pig](http://resinclad.com/cdn/shop/products/22_PIG_375x.jpg?v=1650041950 375w,//resinclad.com/cdn/shop/products/22_PIG_410x.jpg?v=1650041950 410w,//resinclad.com/cdn/shop/products/22_PIG_520x.jpg?v=1650041950 520w,//resinclad.com/cdn/shop/products/22_PIG_576x.jpg?v=1650041950 576w,//resinclad.com/cdn/shop/products/22_PIG_768x.jpg?v=1650041950 768w,//resinclad.com/cdn/shop/products/22_PIG_992x.jpg?v=1650041950 992w,//resinclad.com/cdn/shop/products/22_PIG_1024x.jpg?v=1650041950 1024w,//resinclad.com/cdn/shop/products/22_PIG_1280x.jpg?v=1650041950 1280w)
Pig
$5.99
Size: 24.5mm x 21mm x 36mm
Like this model? Click here to check out the rest of our collection from 3DIPStudios
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
3DIPStudios
@3DIPStudios
If you would like to follow or support this artist, please check out the link below.
instagram.com/3dipstudios
![Pig Bundle](http://resinclad.com/cdn/shop/files/pigbundle_375x.jpg?v=1689181403 375w,//resinclad.com/cdn/shop/files/pigbundle_410x.jpg?v=1689181403 410w,//resinclad.com/cdn/shop/files/pigbundle_520x.jpg?v=1689181403 520w,//resinclad.com/cdn/shop/files/pigbundle_576x.jpg?v=1689181403 576w,//resinclad.com/cdn/shop/files/pigbundle_768x.jpg?v=1689181403 768w,//resinclad.com/cdn/shop/files/pigbundle_992x.jpg?v=1689181403 992w,//resinclad.com/cdn/shop/files/pigbundle_1024x.jpg?v=1689181403 1024w,//resinclad.com/cdn/shop/files/pigbundle_1280x.jpg?v=1689181403 1280w)
![Pig Bundle](http://resinclad.com/cdn/shop/files/720X720-pig_375x.jpg?v=1689181404 375w,//resinclad.com/cdn/shop/files/720X720-pig_410x.jpg?v=1689181404 410w,//resinclad.com/cdn/shop/files/720X720-pig_520x.jpg?v=1689181404 520w,//resinclad.com/cdn/shop/files/720X720-pig_576x.jpg?v=1689181404 576w,//resinclad.com/cdn/shop/files/720X720-pig_768x.jpg?v=1689181404 768w,//resinclad.com/cdn/shop/files/720X720-pig_992x.jpg?v=1689181404 992w,//resinclad.com/cdn/shop/files/720X720-pig_1024x.jpg?v=1689181404 1024w,//resinclad.com/cdn/shop/files/720X720-pig_1280x.jpg?v=1689181404 1280w)
Pig Bundle
from $6.49
32mm ScaleSize:
Pig V1 - 42mm x 12mm x 21mm
Pig V2 - 40mm x 12mm x 24mm
Base not included
Bundle includes both models
Like this model? Click here to check out the rest of our collection from 3DIPStudios
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
3DIPStudios
@3DIPStudios
If you would like to follow or support this artist, please check out the link below.
instagram.com/3dipstudios
![Rooster](http://resinclad.com/cdn/shop/files/ROOSTER_375x.png?v=1689350607 375w,//resinclad.com/cdn/shop/files/ROOSTER_410x.png?v=1689350607 410w,//resinclad.com/cdn/shop/files/ROOSTER_520x.png?v=1689350607 520w,//resinclad.com/cdn/shop/files/ROOSTER_576x.png?v=1689350607 576w,//resinclad.com/cdn/shop/files/ROOSTER_768x.png?v=1689350607 768w,//resinclad.com/cdn/shop/files/ROOSTER_992x.png?v=1689350607 992w,//resinclad.com/cdn/shop/files/ROOSTER_1024x.png?v=1689350607 1024w,//resinclad.com/cdn/shop/files/ROOSTER_1280x.png?v=1689350607 1280w)
Rooster
$5.49
32mm Scale
Approximate Size: 30mm x 29.5mm x 20.5mm
Base not included
Like this model? Click here to check out the rest of our collection from 3DIPStudios
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
3DIPStudios
@3DIPStudios
If you would like to follow or support this artist, please check out the link below.
instagram.com/3dipstudios
![Sheep](http://resinclad.com/cdn/shop/products/21_SHEEP_375x.jpg?v=1650041275 375w,//resinclad.com/cdn/shop/products/21_SHEEP_410x.jpg?v=1650041275 410w,//resinclad.com/cdn/shop/products/21_SHEEP_520x.jpg?v=1650041275 520w,//resinclad.com/cdn/shop/products/21_SHEEP_576x.jpg?v=1650041275 576w,//resinclad.com/cdn/shop/products/21_SHEEP_768x.jpg?v=1650041275 768w,//resinclad.com/cdn/shop/products/21_SHEEP_992x.jpg?v=1650041275 992w,//resinclad.com/cdn/shop/products/21_SHEEP_1024x.jpg?v=1650041275 1024w,//resinclad.com/cdn/shop/products/21_SHEEP_1280x.jpg?v=1650041275 1280w)
Sheep
$5.99
Size: 90mm x 50mm x 77mm
Like this model? Click here to check out the rest of our collection from 3DIPStudios
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
3DIPStudios
@3DIPStudios
If you would like to follow or support this artist, please check out the link below.
instagram.com/3dipstudios
![Sheep Bundle](http://resinclad.com/cdn/shop/files/sheepbundle_375x.png?v=1689180419 375w,//resinclad.com/cdn/shop/files/sheepbundle_410x.png?v=1689180419 410w,//resinclad.com/cdn/shop/files/sheepbundle_520x.png?v=1689180419 520w,//resinclad.com/cdn/shop/files/sheepbundle_576x.png?v=1689180419 576w,//resinclad.com/cdn/shop/files/sheepbundle_768x.png?v=1689180419 768w,//resinclad.com/cdn/shop/files/sheepbundle_992x.png?v=1689180419 992w,//resinclad.com/cdn/shop/files/sheepbundle_1024x.png?v=1689180419 1024w,//resinclad.com/cdn/shop/files/sheepbundle_1280x.png?v=1689180419 1280w)
![Sheep Bundle](http://resinclad.com/cdn/shop/files/SHEEP_375x.png?v=1689258761 375w,//resinclad.com/cdn/shop/files/SHEEP_410x.png?v=1689258761 410w,//resinclad.com/cdn/shop/files/SHEEP_520x.png?v=1689258761 520w,//resinclad.com/cdn/shop/files/SHEEP_576x.png?v=1689258761 576w,//resinclad.com/cdn/shop/files/SHEEP_768x.png?v=1689258761 768w,//resinclad.com/cdn/shop/files/SHEEP_992x.png?v=1689258761 992w,//resinclad.com/cdn/shop/files/SHEEP_1024x.png?v=1689258761 1024w,//resinclad.com/cdn/shop/files/SHEEP_1280x.png?v=1689258761 1280w)
Sheep Bundle
from $5.49
32mm ScaleSize:
Sheep V1 - 32mm x 15mm x 24.5mm
Sheep V2 - 35mm x 16.5mm x 35mm
Base not included
Bundle includes both models
Like this model? Click here to check out the rest of our collection from 3DIPStudios
Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.
All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.
All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.
The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.
Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.
Resinclad LLC is a licensed distributor of these 3D prints designed by:
3DIPStudios
@3DIPStudios
If you would like to follow or support this artist, please check out the link below.
instagram.com/3dipstudios