Products

Approximate size: 32mm - 33.5mm x 22.5mm x 44mm 75mm - 68mm x 46.5mm x 89.5mm Base Style: SpecializedComes in 32mm or 75mm scale  Like this model? Click here to check out the rest of our collection from White Werewolf Tavern   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: White Werewolf Tavern @WWTavern If you would like to follow or support this artist, please check out the links below. patreon.com/whitewerewolftavern www.instagram.com/wwtavern myminifactory.com/users/WWTavern facebook.com/miniatures3d twitter.com/tavernww

Approximate size: 62.5mm x 88mm x 109mm  Like this model? Click here to check out the rest of our collection from White Werewolf Tavern   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: White Werewolf Tavern @WWTavern If you would like to follow or support this artist, please check out the links below. patreon.com/whitewerewolftavern www.instagram.com/wwtavern myminifactory.com/users/WWTavern facebook.com/miniatures3d twitter.com/tavernww

Approximate size: Banaag Fletcher - A - 45.5mm x 49.5mm x 44mm Banaag Fletcher - B - 47mm x 52mm x 56.5mm Banaag Fletcher - C - 48.5mm x 32mm x 61.5mm Banaag Fletcher - D - 53.5mm x 52mm x 43mm Base Info: Saurus - 35mm - RoundComes in 32mm scaleBundle includes all 4 models  Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Animal Group Tree - 46.5mm x 52mm x 44.5mm Big Rock Bird - 85.5mm x 75mm x 58.5mm Big Rock Fox Snake - 74mm x 67.5mm x 43.5mm Cactus Komodo Dragon - 79mm x 59.5mm x 47mm Cactus Lizard - 53.5mm x 47mm x 38.5mm Rabbit Fox - 46.5mm x 46mm x 48mm Rabbit Rocks - 55mm x 37.5mm x 37mm Rocks Palm Tree - 95mm x 71mm x 48.5mm Snake Lizard - 54mm x 42mm x 32mm Steep Rock Komodo Dragon - 93mm x 83.5mm x 38mm Comes in 32mm scaleBundle includes all 10 models  Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Agave - 51mm x 55.5mm x 26mm Agave Cactus - 31.5mm x 33mm x 29mm Bunnies - 35mm x 53mm x 31mm Cactus Fox - 27.5mm x 54mm x 43.5mm Cactus Goup - 20mm x 37.5mm x 36mm Cactus Rocks A - 30.5mm x 46mm x 40mm Cactus Rocks B - 37.5mm x 63.5mm x 26mm Cactus Roses - 20mm x 34.5mm x 21.5mm Cactus Scorpion - 42mm x 50mm x 40mm Cactus Snake - 26.5mm x 33mm x 52mm Komodo Dragon - 38mm x 47mm x 23.5mm Lizard Bird - 31.5mm x 45.5mm x 24.5mm Rocks A - 55.5mm x 95mm x 35mm Rocks B - 73.5mm x 78.5mm x 27.5mm Rocks C - 64.5mm x 72mm x 52mm Rocks D - 73mm x 77.5mm x 25.5mm Rocks E - 45.5mm x 51mm x 37mm Rocks Flora - 32.5mm x 73.5mm x 22.5mm Rounded Cactus - 28mm x 41mm x 23mm Cactus Trees - 46mm x 67mm x 50mm Comes in 32mm scaleBundle includes all 20 models  Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Arch 01 - 129mm x 62mm x 122.5mm Arch 02 - 197mm x 115mm x 142.5mm Arch 03 - 175mm x 69mm x 78mm Arch 04 - 179mm x 295.5mm x 76mm Arch 05 - 228.5mm x 87.5mm x 103mm Bridge 01 - 407.5mm x 173mm x 69.5mm Bridge 02 - 272mm x 166.5mm x 58.5mm Bridge 03 - 349.5mm x 136mm x 98mm Bridge 04 - 380.5mm x 148.5mm x 63.5mm Bridge 05 - 265mm x 159mm x 73.5mm Comes in 32mm scaleBundle includes all 10 models  Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Ember Stream - A - 16.5mm x 24mm x 29.5mm Ember Stream - B - 33mm x 20.5mm x 38mm Ember Stream - C - 29mm x 31mm x 40.5mm Base Info: Ember Stream - A - 35mm - Volcano - Hero Ember Stream - B - 25mm - Volcano - Hero Ember Stream - C - 25mm - Volcano - Hero Comes in 32mm scaleBundle includes all 3 models  Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Gozhoo Channeler - A - 54.5mm x 65.5mm x 75.5mm Gozhoo Channeler - B - 78.5mm x 58.5mm x 77.5mm Base Info: Saurus - 50mm - RoundComes in 32mm scaleBundle includes both models  Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Base Info: Saurus - 100mm - RoundComes in 32mm scale  Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Beach Floor Tile 2x2 B - 50.5mm x 50.5mm x 11.5mm Beach Floor Tile 4X4 A - 101mm x 101mm x 11.5mm Beach Floor Tile 4x4 B - 101mm x 101mm x 12.5mm Cave Floor Tile 2x2 A - 50.5mm x 50.5mm x 12mm Cave Floor Tile 2x2 B - 50.5mm x 50.5mm x 12mm Cave Floor Tile 4X4 A - 101mm x 101mm x 13mm Cave Floor Tile 4x4 B - 101mm x 101mm x 13mm Desert Floor Tile 2x2 A - 50.5mm x 50.5mm x 11.5mm Desert Floor Tile 2x2 B - 50.5mm x 50.5mm x 11.5mm Desert Floor Tile 4X4 A - 101mm x 101mm x 12mm Desert Floor Tile 4x4 B - 101mm x 101mm x 13mm Forest Floor Tile 2x2 A - 50.5mm x 50.5mm x 12mm Forest Floor Tile 2x2 B - 50.5mm x 50.5mm x 12mm Forest Floor Tile 4X4 A - 101mm x 101mm x 12mm Forest Floor Tile 4x4 B - 101mm x 101mm x 12mm Frostlands Floor Tile 2x2 A - 50.5mm x 50.5mm x 12mm Frostlands Floor Tile 2x2 B - 50.5mm x 50.5mm x 12mm Frostlands Floor Tile 4X4 A - 101mm x 101mm x 13.5mm Frostlands Floor Tile 4x4 B - 101mm x 101mm x 13.5mm Jungle Floor Tile 2x2 A - 50.5mm x 50.5mm x 12mm Jungle Floor Tile 2x2 B - 50.5mm x 50.5mm x 12mm Jungle Floor Tile 4X4 A - 101mm x 101mm x 12mm Jungle Floor Tile 4x4 B - 101mm x 101mm x 12mm Meadows Floor Tile 2x2 A - 50.5mm x 50.5mm x 12mm Meadows Floor Tile 2x2 B - 50.5mm x 50.5mm x 12mm Meadows Floor Tile 4X4 A - 101mm x 101mm x 12mm Meadows Floor Tile 4x4 B - 101mm x 101mm x 12mm Ocean Floor Tile 2x2 A - 50.5mm x 50.5mm x 12.5mm Ocean Floor Tile 2x2 B - 50.5mm x 50.5mm x 12.5mm Ocean Floor Tile 4X4 A - 101mm x 101mm x 13mm Ocean Floor Tile 4x4 B - 101mm x 101mm x 13mm Oriental Floor Tile 2x2 A - 50.5mm x 50.5mm x 11.5mm Oriental Floor Tile 2x2 B - 50.5mm x 50.5mm x 11.5mm Oriental Floor Tile 4X4 A - 101mm x 101mm x 12mm Oriental Floor Tile 4x4 B - 101mm x 101mm x 12mm Savanna Floor Tile 2x2 A - 50.5mm x 50.5mm x 11.5mm Savanna Floor Tile 2x2 B - 50.5mm x 50.5mm x 11.5mm Savanna Floor Tile 4X4 A - 101mm x 101mm x 12mm Savanna Floor Tile 4x4 B - 101mm x 101mm x 12mm Swamp Floor Tile 2x2 A - 50.5mm x 50.5mm x 11mm Swamp Floor Tile 2x2 B - 50.5mm x 50.5mm x 11mm Swamp Floor Tile 4X4 A - 101mm x 101mm x 11.5mm Swamp Floor Tile 4x4 B - 101mm x 101mm x 12mm Volcano Floor Tile 2x2 A - 50.5mm x 50.5mm x 12.5mm Volcano Floor Tile 2x2 B - 50.5mm x 50.5mm x 13.5mm Volcano Floor Tile 4X4 A - 101mm x 101mm x 13.5mm Volcano Floor Tile 4x4 B - 101mm x 101mm x 14mm Wastelands Floor Tile 2x2 A - 50.5mm x 50.5mm x 12.5mm Wastelands Floor Tile 2x2 B - 50.5mm x 50.5mm x 13mm Wastelands Floor Tile 4X4 A - 101mm x 101mm x 19.5mm Wastelands Floor Tile 4x4 B - 101mm x 101mm x 19mm Comes in 32mm scale Includes model and 2 Open Lock clips These models use the Open Lock system to connect. If you are in need of extra Open Lock Clips please make sure to look at our listing and add some to your cart before checking out.   Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Cave Wall M - 125.5mm x 38.5mm x 80mm Cave Wall S 01 - 68.5mm x 29.5mm x 69.5mm Cave Wall S 02 - 68.5mm x 27.5mm x 73mm Desert Wall M - 125.5mm x 35.5mm x 86.5mm Desert Wall S 01 - 68.5mm x 26mm x 75.5mm Desert Wall S 02 - 68.5mm x 23mm x 73.5mm Frostlands Wall M - 125.5mm x 39.5mm x 77.5mm Frostlands Wall S 01 - 68.5mm x 27.5mm x 74mm Frostlands Wall S 02 - 68.5mm x 32mm x 75mm Jungle Wall M - 125.5mm x 30mm x 80mm Jungle Wall S 01 - 68.5mm x 29.5mm x 66mm Jungle Wall S 02 - 68.5mm x 27mm x 68mm Ocean Wall M - 125.5mm x 40.5mm x 77mm Ocean Wall S 01 - 68.5mm x 35.5mm x 73mm Ocean Wall S 02 - 68.5mm x 35.5mm x 74.5mm Oriental Wall M - 125.5mm x 34mm x 88.5mm Oriental Wall S 01 - 68.5mm x 31mm x 76.5mm Oriental Wall S 02 - 68.5mm x 33mm x 74mm Savanna Wall M - 125.5mm x 33.5mm x 87mm Savanna Wall S 01 - 68.5mm x 39.5mm x 73.5mm Savanna Wall S 02 - 68.5mm x 28.5mm x 73.5mm Swamp Wall M - 125.5mm x 31.5mm x 70mm Swamp Wall S 01 - 68.5mm x 35.5mm x 73.5mm Swamp Wall S 02 - 68.5mm x 31.5mm x 69.5mm Volcano Wall M - 125.5mm x 37.5mm x 77mm Volcano Wall S 01 - 28.5mm x 25.5mm x 73mm Volcano Wall S 02 - 68.5mm x 23.5mm x 74.5mm Wastelands Wall M - 125.5mm x 37mm x 78.5mm Wastelands Wall S 01 - 68.5mm x 27.5mm x 73.5mm Wastelands Wall S 02 - 68.5mm x 28.5mm x 69mm Comes in 32mm scale Models include 2 end caps Set includes all 3 models & 4 end caps Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Cave Platform - 234.5mm x 153mm x 107.5mm Desert Platform - 182.5mm x 197.5mm x 44mm Forest Platform - 200mm x 163mm x 204.5mm Frostlands Platform - 228.5mm x 129mm x 98mm Jungle Platform - 224.5mm x 149mm x 130.5mm Ocean Platform - 260mm x 168.5mm x 143mm Oriental Platform - 211mm x 140.5mm x 111mm Savanna Platform - 188.5mm x 123mm x 118mm Swamp Platform - 206.5mm x 157.5mm x 115.5mm Volcano Platform - 234.5mm x 177mm x 120.5mm Wastelands Platform - 211mm x 155mm x 74mm Comes in 32mm scale Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Base Info: Saurus - 100mm - RoundComes in 32mm scale  Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Base Info: Saurus - 60mm - RoundComes in 32mm scaleBundle includes all 4 models  Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

  Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Comes in 32mm scaleBundle includes both models  Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Unega Justicar - A - 84.5mm x 57mm x 62.5mm Unega Justicar - B - 65.5mm x 69mm x 62.5mm Unega Justicar - C - 89.5mm x 59.5mm x 72.5mm Base Info: Saurus - 60mm - RoundComes in 32mm scaleBundle includes all 3 models  Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Unega Protector - A - 31.5mm x 50.5mm x 56mm Unega Protector - B - 45.5mm x 45.5mm x 41mm Unega Protector - C - 44.5mm x 39mm x 58.5mm Unega Protector - D - 36.5mm x 44mm x 37.5mm Base Info: Saurus - 35mm - RoundComes in 32mm scaleBundle includes all 4 models  Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Unega Raptor - A - 32mm x 27mm x 33.5mm Unega Raptor - A - Coilfang - 32.5mm x 34mm x 33.5mm Unega Raptor - B - 16.5mm x 43.5mm x 26mm Unega Raptor - B - Coilfang - 17.5mm x 46.5mm x 29mm Unega Raptor - C - 17mm x 42.5mm x 21.5mm Unega Raptor - C - Coilfang - 18.5mm x 45.5mm x 31.5mm Unega Raptor - D - 21.5mm x 39.5mm x 36.5mm Unega Raptor - D - Coilfang - 23.5mm x 46mm x 36.5mm Unega Raptor - E - 24mm x 30.5mm x 36mm Unega Raptor - E - Coilfang - 37.5mm x 39mm x 36mm Base Info: Saurus - 25mm - RoundComes in 32mm scaleBundle includes all 10 models  Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Crater Lava Flow A - 53mm x 57.5mm x 25mm Crater Lava Flow B - 61.5mm x 95.5mm x 47.5mm Crater Lava Flow C - 56.5mm x 54.5mm x 64mm Crater Lava Flow D - 54mm x 71.5mm x 55.5mm Crater Lava Flow E - 62mm x 51mm x 63mm Lava Rock Formation A - 60mm x 50mm x 72.5mm Lava Rock Formation B - 89.5mm x 66mm x 65.5mm Lava Rock Formation C - 89mm x 74mm x 35.5mm Small Crater A - 50mm x 58.5mm x 17.5mm Small Crater B - 43.5mm x 50mm x 19mm Small Crater C - 58mm x 63.5mm x 25mm Spikes Formation A - 89.5mm x 61mm x 45mm Spikes Formation B - 87.5mm x 64mm x 53.5mm Spikes Formation C - 91mm x 68.5mm x 54.5mm Spikes Formation D - 112mm x 53mm x 61.5mm Comes in 32mm scale Bundle includes all 15 models Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Geyser 01 - 93mm x 102.5mm x 55mm Geyser 02 - 80.5mm x 71mm x 100.5mm Geyser 03 - 75mm x 77mm x 97.5mm Platform 01 - 70.5mm x 115mm x 101.5mm Platform 02 - 92mm x 127.5mm x 67.5mm Platform 03 - 49.5mm x 91.5mm x 61.5mm Platform 04 - 100.5mm x 196mm x 76.5mm Platform 05 - 118mm x 172.5mm x 71mm Platform 06 - 103.5mm x 158mm x 59mm Platform 07 - 111.5mm x 173mm x 36.5mm Comes in 32mm scale Bundle includes all 10 models Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Lava River I 01 - 69.5mm x 96mm x 11mm Lava River I 02 - 94.5mm x 95.5mm x 10mm Lava River I 03 - 77mm x 88mm x 11.5mm Lava River I 04 - 90.5mm x 87.5mm x 9.5mm Lava River L - 92mm x 127.5mm x 10mm Volcano Rock Path L - 97mm x 110.5mm x 10.5mm Volcano Rock Path S - 91mm x 114.5mm x 8mm Volcano Rock Path C - 86.5mm x 90mm x 8mm Volcano Rock Path I 01 - 63.5mm x 104.5mm x 8mm Volcano Rock Path I 02 - 66.5mm x 107mm x 8mm Volcano Difficult Terrain 01 - 94.5mm x 171.5mm x 83mm Volcano Difficult Terrain 02 - 114mm x 126mm x 93mm Volcano Difficult Terrain 03 - 121mm x 215mm x 106mm Volcano Difficult Terrain 04 - 121.5mm x 199.5mm x 66.5mm Volcano Difficult Terrain 05 - 93mm x 171.5mm x 37mm Comes in 32mm scale Bundle includes all 17 sets Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay