Products

Comes in 32mm scale  Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Undead Bear - A - 18mm x 28.5mm x 38.5mm Undead Bear - B - 24mm x 23.5mm x 46mm Undead Bear - C - 22mm x 31mm x 39mm Base Info: Plain - 25mmComes in 32mm scaleBundle includes all 3 models  Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Undead Cow - 27mm x 51mm x 39mm Undead Dog - 19mm x 25mm x 14.5mm Undead Pig - 16mm x 30.5mm x 16.5mm Base Info: Undead Cow - Halloween Base - 60mm - Oval Undead Dog - Halloween Base - 25mm Undead Pig - Halloween Base - 25mm Comes in 32mm scaleBundle includes all 3 modelsLike this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Undead Baker - 19mm x 34.5mm x 31.5mm Undead Cook - 19mm x 25.5mm x 37mm Undead Peasant - 23mm x 30mm x 40mm Undead Wagoner - 27mm x 43mm x 30mm Undead Worker - 35.5mm x 23.5mm x 47.5mm Base Info: Undead Baker - Halloween Base - 25mm Undead Cook - Halloween Base - 25mm Undead Peasant - Halloween Base - 25mm Undead Wagoner - Halloween Base - 30mm Undead Worker - Halloween Base - 30mm Comes in 32mm scaleBundle includes all 5 modelsLike this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: 96.5mm x 70.5mm x 103mmBase Info: Crypt - 75mm - RoundComes in 32mm scale  Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Base Info: Crypt - 75mm - RoundComes in 32mm scale  Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: 38mm x 28.5mm x 64mmBase Info: Crypt - 35mm - RoundComes in 32mm scale  Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Unega Justicar - A - 84.5mm x 57mm x 62.5mm Unega Justicar - B - 65.5mm x 69mm x 62.5mm Unega Justicar - C - 89.5mm x 59.5mm x 72.5mm Base Info: Saurus - 60mm - RoundComes in 32mm scaleBundle includes all 3 models  Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Unega Protector - A - 31.5mm x 50.5mm x 56mm Unega Protector - B - 45.5mm x 45.5mm x 41mm Unega Protector - C - 44.5mm x 39mm x 58.5mm Unega Protector - D - 36.5mm x 44mm x 37.5mm Base Info: Saurus - 35mm - RoundComes in 32mm scaleBundle includes all 4 models  Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Unega Raptor - A - 32mm x 27mm x 33.5mm Unega Raptor - A - Coilfang - 32.5mm x 34mm x 33.5mm Unega Raptor - B - 16.5mm x 43.5mm x 26mm Unega Raptor - B - Coilfang - 17.5mm x 46.5mm x 29mm Unega Raptor - C - 17mm x 42.5mm x 21.5mm Unega Raptor - C - Coilfang - 18.5mm x 45.5mm x 31.5mm Unega Raptor - D - 21.5mm x 39.5mm x 36.5mm Unega Raptor - D - Coilfang - 23.5mm x 46mm x 36.5mm Unega Raptor - E - 24mm x 30.5mm x 36mm Unega Raptor - E - Coilfang - 37.5mm x 39mm x 36mm Base Info: Saurus - 25mm - RoundComes in 32mm scaleBundle includes all 10 models  Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Unicycle Goblin - A - 60.5mm x 21.5mm x 21.5mm Unicycle Goblin - B - 50.5mm x 26.55mm x 22.5mm Base Info: Scrapyard - 25mm - RoundComes in 32mm scaleBundle includes both modelsLike this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Unnu Ironscar - Claws - 34.5mm x 37.5mm x 55mm Unnu Ironscar - Cleaver - 34.5mm x 55.5mm x 48mm Base Info: Woodenhorn - 35mm - Round Comes in 32mm scale Bundle includes both models Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Untur, Warrior Orc - A - 47.5mm x 51mm x 65.5mm Untur, Warrior Orc - B - 37.5mm x 39mm x 62.5mm Base Info: Wastelands - 50mm - PillComes in 32mm scaleBundle includes both models  Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Comes in 32mm scale  Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Ursalor - 69mm x 59mm x 57mm Ursalor W/ Armor - 69mm x 59.5mm x 62mm Ursalor and Viarel - 69mm x 59.5mm x 85.5mm Ursalor and Herdan - 69mm x 75mm x 89mm Base Info: Elven Grove - 60mmComes in 32mm scaleBundle includes all 4 modelsLike this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Utah Raptor - 1 - 25.5mm x 45.5mm x 33mm Utah Raptor - 2 - 20mm x 48mm x 29.5mm Utah Raptor - 3 - 14mm x 42.5mm x 36.5mm Comes in 32mm scale Base not included Bundle includes all 3 models   Like this model? Click here to check out the rest of our collection from 3DIPStudios   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: 3DIPStudios @3DIPStudios If you would like to follow or support this artist, please check out the link below. instagram.com/3dipstudios

Approximate size: 29.5mm x 101mm x 49mm Base not included Comes in 32mm scale   Like this model? Click here to check out the rest of our collection from 3DIPStudios   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: 3DIPStudios @3DIPStudios If you would like to follow or support this artist, please check out the link below. instagram.com/3dipstudios

Approximate size: 20.5mm x 30mm x 50mmBase Info: Legion - 25mm - RoundComes in 32mm scale  Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: 103mm x 117.5mm x 87.5mmBase Info: Plain - 115mm - OvalComes in 32mm scaleLike this model? Click here to check out the rest of our collection from 3DIPStudios   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: 3DIPStudios @3DIPStudios If you would like to follow or support this artist, please check out the link below. instagram.com/3dipstudios

Approximate size: Female Vampire - 1 - 22.5mm x 20.5mm x 40.5mm Female Vampire - 2 - 30mm x 39.5mm x 40.5mm Female Vampire - 3 - 18.5mm x 14mm x 41mm Female Vampire - 4 - 31mm x 19mm x 44.5mm Male Vampire - 1 - 40mm x 32mm x 41mm Male Vampire - 2 - 48.5mm x 28mm x 41mm Base Info: Temple Floor - 25mmComes in 32mm scale Bundle includes all 6 models  Like this model? Click here to check out the rest of our collection from Galaad Miniatures Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Galaad Miniatures @GalaadMiniatures If you would like to follow or support this artist, please check out the links below. patreon.com/galaad facebook.com/galaadminiatures instagram.com/galaad_miniatures myminifactory.com/users/galaad  

Approximate size: Du Sang Tamisra - 30.5mm x 32.5mm x 38.5mm Esmeray Tamisra - 26.5mm x 25mm x 43.5mm Base Info: Vampire Castle - 30mmComes in 32mm scaleLike this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Fighter Dodging - 30mm x 41mm x 32.5mm Fighter Lady - 27mm x 24.5mm x 35mm Fighter Poising - 31.5mm x 32mm x 38mm Base Info: Dungeon Base - 30mmComes in 32mm scaleBundle includes all 3 modelsLike this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Charon - 108mm x 34.5mm x 56.5mm Cronus - 51mm x 27.5mm x 52.5mm Lychon - 58mm x 47.5mm x 46mm Base Info: Vampire Castle - 30mmComes in 32mm scaleLike this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Hideyki - 34mm x 35.5mm x 41.5mm Leila - 21.5mm x 18.5mm x 35mm Rein - 33mm x 27mm x 32.5mm Base Info: Vampire Castle - 25mmComes in 32mm scaleLike this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Vampire Lord - 1 - 59.5mm x 58.5mm x 65mm Vampire Lord - 2 - 36mm x 21.5mm x 51mm Base Info: Temple Floor - 25mmComes in 32mm scale Bundle includes both models  Like this model? Click here to check out the rest of our collection from Galaad Miniatures Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Galaad Miniatures @GalaadMiniatures If you would like to follow or support this artist, please check out the links below. patreon.com/galaad facebook.com/galaadminiatures instagram.com/galaad_miniatures myminifactory.com/users/galaad