Products

Comes in 32mm scale  Like this model? Click here to check out the rest of our collection from  ToyDoy Miniatures   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: ToyDoy Miniatures @ToyDoyMiniatures If you would like to follow or support this artist, please check out the link below. myminifactory.com/it/users/Toydoy

Base Info: Saurus - 100mm - RoundComes in 32mm scale  Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Base Size: 25mm Base Style: Plain Square Like this model? Click here to check out the rest of our collection from 3DIPStudios   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: 3DIPStudios @3DIPStudios If you would like to follow or support this artist, please check out the link below. instagram.com/3dipstudios

Comes in 32mm scaleBundle includes both models  Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Comes in 32mm scale  Like this model? Click here to check out the rest of our collection from  ToyDoy Miniatures   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: ToyDoy Miniatures @ToyDoyMiniatures If you would like to follow or support this artist, please check out the link below. myminifactory.com/it/users/Toydoy

Approximate size: Shadow Knight - A - V1 - 47mm x 26.5mm x 52.5mm Shadow Knight - A - V2 - 42.5mm x 23mm x 39.5mm Shadow Knight - B - V1 - 47mm x 36mm x 35.5mm Shadow Knight - B - V2 - 34mm x 36mm x 35.5mm Shadow Knight - C - V1 - 34.5mm x 31mm x 43mm Shadow Knight - C - V2 - 34.5mm x 27mm x 43mm Shadow Knight - D - V1 - 46.5mm x 37mm x 63mm Shadow Knight - D - V2 - 28mm x 20mm x 47.5mm Shadow Knight - E - V1 - 41.5mm x 29mm x 40.5mm Shadow Knight - E - V2 - 27mm x 50.5mm x 38mm Base Info: Doom - 35mm - RoundComes in 32mm scaleBundle includes all 10 models  Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Base Size: 25mmBase Style: Plain Comes in 32mm scale Bundle includes all 3 models  Like this model? Click here to check out the rest of our collection from Galaad Miniatures Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Galaad Miniatures @GalaadMiniatures If you would like to follow or support this artist, please check out the links below. patreon.com/galaad facebook.com/galaadminiatures instagram.com/galaad_miniatures myminifactory.com/users/galaad  

Base Size: 25mm Base Style: Plain Square   Like this model? Click here to check out the rest of our collection from 3DIPStudios   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: 3DIPStudios @3DIPStudios If you would like to follow or support this artist, please check out the link below. instagram.com/3dipstudios

Approximate size: Skeleton - A - 26mm x 46mm x 31.5mm Skeleton - B - 27mm x 44mm x 31.5mm Skeleton - C - 23mm x 44.5mm x 32mm Skeleton - D - 27mm x 47.5mm x 32mm Base Info: Skeleton - A - 25mm - Brick Skeleton - B - 25mm - Brick W/Chain Skeleton - C - 25mm - Brick Skeleton - D - 25mm - Brick W/Chain Bundle includes all 4 models Like this model? Click here to check out the rest of our collection from Chibiatures Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes. All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time. All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring. The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes. Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out. Resinclad LLC is a licensed distributor of these 3D prints designed by: Chibiatures @Chibiatures If you would like to follow or support this artist, please check out the link below. Chibiatures.com  

Approximate size: Skeleton - A - 47mm x 26.5mm x 38.5mm Skeleton - B - 44mm x 26.5mm x 38.5mm Skeleton - C - 44mm x 26.5mm x 38.5mm Skeleton - D - 47mm x 26mm x 38.5mm Base Info: Skeleton - A - 25mm - Brick Skeleton - B - 25mm - Brick W/Chain Skeleton - C - 25mm - Brick Skeleton - D - 25mm - Brick W/Chain Bundle includes all 4 models Like this model? Click here to check out the rest of our collection from Chibiatures Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes. All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time. All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring. The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes. Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out. Resinclad LLC is a licensed distributor of these 3D prints designed by: Chibiatures @Chibiatures If you would like to follow or support this artist, please check out the link below. Chibiatures.com  

Approximate size: Skeleton - A - 35.5mm x 31mm x 32mm Skeleton - B - 35mm x 30.5mm x 38.5mm Skeleton - C - 45.5mm x 21mm x 38.5mm Skeleton - D - 35.5mm x 30.5mm x 31.5mm Base Info: Skeleton - A - 25mm - Brick Skeleton - B - 25mm - Brick W/Chain Skeleton - C - 25mm - Brick Skeleton - D - 25mm - Brick W/Chain Bundle includes all 4 modelsLike this model? Click here to check out the rest of our collection from Chibiatures Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes. All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time. All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring. The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes. Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out. Resinclad LLC is a licensed distributor of these 3D prints designed by: Chibiatures @Chibiatures If you would like to follow or support this artist, please check out the link below. Chibiatures.com

Approximate size: Skeleton - A - 50mm x 41mm x 41mm Skeleton - B - 33.5mm x 28.5mm x 43.5mm Skeleton - C - 37mm x 28.5mm x 51mm Skeleton - D - 33.5mm x 27.5mm x 44mm Base Info: Skeleton - A - 25mm - Brick Skeleton - B - 25mm - Brick W/Chain Skeleton - C - 25mm - Brick Skeleton - D - 25mm - Brick W/Chain Bundle includes all 4 modelsLike this model? Click here to check out the rest of our collection from Chibiatures Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes. All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time. All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring. The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes. Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out. Resinclad LLC is a licensed distributor of these 3D prints designed by: Chibiatures @Chibiatures If you would like to follow or support this artist, please check out the link below. Chibiatures.com

Approximate size: Skeleton - A - 25.5mm x 30mm x 36.5mm Skeleton - B - 24.5mm x 31.5mm x 37mm Skeleton - C - 24.5mm x 31.5mm x 37mm Skeleton - D - 24mm x 31.5mm x 37mm Base Info: Skeleton - A - 25mm - Brick Skeleton - B - 25mm - Brick W/Chain Skeleton - C - 25mm - Brick Skeleton - D - 25mm - Brick W/Chain Bundle includes all 4 modelsLike this model? Click here to check out the rest of our collection from Chibiatures Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes. All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time. All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring. The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes. Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out. Resinclad LLC is a licensed distributor of these 3D prints designed by: Chibiatures @Chibiatures If you would like to follow or support this artist, please check out the link below. Chibiatures.com

Approximate size: Skeleton - A - 24.5mm x 31mm x 33mm Skeleton - B - 27.5mm x 31mm x 34.5mm Skeleton - C - 28mm x 31mm x 34.5mm Skeleton - D - 30.5mm x 30.5mm x 39.5mm Base Info: Skeleton - A - 25mm - Brick Skeleton - B - 25mm - Brick W/Chain Skeleton - C - 25mm - Brick Skeleton - D - 25mm - Brick W/Chain Bundle includes all 4 modelsLike this model? Click here to check out the rest of our collection from Chibiatures Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes. All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time. All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring. The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes. Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out. Resinclad LLC is a licensed distributor of these 3D prints designed by: Chibiatures @Chibiatures If you would like to follow or support this artist, please check out the link below. Chibiatures.com

Approximate size: Skeleton King - Standing - V1 - 50.5mm x 19.5mm x 43mm Skeleton King - Standing - V2 - 50.5mm x 19.5mm x 42.5mm Skeleton King - Sitting - V1 - 43mm x 25mm x 47mm Skeleton King - Sitting - V2 - 43mm x 25mm x 47mm Base Info: Skeleton King - Standing - 25mm - Brick W/Chain Like this model? Click here to check out the rest of our collection from Chibiatures Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes. All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time. All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring. The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes. Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out. Resinclad LLC is a licensed distributor of these 3D prints designed by: Chibiatures @Chibiatures If you would like to follow or support this artist, please check out the link below. Chibiatures.com

Approximate size: Skeleton Elite - 1 - 33.5mm x 31.5mm x 42.5mm Skeleton Elite - 2 - 34mm x 33.5mm x 42.5mm Skeleton Elite - 3 - 38.5mm x 26mm x 42.5mm Skeleton Warrior - 1 - 22mm x 39mm x 27mm Skeleton Warrior - 2 - 21.5mm x 22.5mm x 43mm Skeleton Warrior - 3 - 30mm x 21.5mm x 42mm Skeleton Warrior - 4 - 27.5mm x 22mm x 43.5mm Base Info: Temple Floor - 25mm - SquareComes in 32mm scale Bundle includes all 7 models Like this model? Click here to check out the rest of our collection from Galaad Miniatures Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Galaad Miniatures @GalaadMiniatures If you would like to follow or support this artist, please check out the links below. patreon.com/galaad facebook.com/galaadminiatures instagram.com/galaad_miniatures myminifactory.com/users/galaad  

Approximate size: Skull Collectors - A - 34mm x 12mm x 35mm Skull Collectors - B - 23.5mm x 32mm x 43mm Skull Collectors - C - 24mm x 21.5mm x 38mm Skull Collectors - D - 18mm x 25mm x 34.5mm Skull Collectors - E - 23mm x 31mm x 36mm Skull Collectors - F - 20.5mm x 35.5mm x 35.5mm Base Info: Ork - 25mmComes in 32mm scaleBundle includes all 6 modelsLike this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Base Size: 25mm Base Style: Specialized Bundle includes all 4 models   Like this model? Click here to check out the rest of our collection from Galaad Miniatures Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Galaad Miniatures @GalaadMiniatures If you would like to follow or support this artist, please check out the links below. patreon.com/galaad facebook.com/galaadminiatures instagram.com/galaad_miniatures myminifactory.com/users/galaad  

Comes in 32mm scale Base Size: 25mm Base Style: Specialized Bundle includes all 6 models   Like this model? Click here to check out the rest of our collection from White Werewolf Tavern   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: White Werewolf Tavern @WWTavern If you would like to follow or support this artist, please check out the links below. patreon.com/whitewerewolftavern www.instagram.com/wwtavern myminifactory.com/users/WWTavern facebook.com/miniatures3d twitter.com/tavernww

Approximate size: Snake Warrior - 1 - 43mm x 40.5mm x 46mm Snake Warrior - 2 - 31.5mm x 41.5mm x 43.5mm Snake Warrior - 3 - 41.5mm x 44mm x 45mm Snake Warrior - 4 - 25mm x 31mm x 44mm Snake Archer - 1 - 32.5mm x 34.5mm x 46.5mm Snake Archer - 2 - 39mm x 23.5mm x 50mm Snake Archer - 3 - 24.5mm x 33.5mm x 49.5mm Snake Archer - 4 - 29.5mm x 29.5mm x 46.5mm Base Info: Moon Crater - 25mm - RoundComes in 32mm scale Bundle includes all 8 modelsLike this model? Click here to check out the rest of our collection from Goon Master Games   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Goon Master Games @GoonMasterGames If you would like to follow or support this artist, please check out the links below. patreon.com/GoonMasterGames instagram.com/GoonMasterGames myminifactory.com/users/GoonMasterGames

Approximate size: Spark Gadgeteer - A - 31mm x 25mm x 34mm Spark Gadgeteer - B - 27mm x 34.5mm x 31.5mm Spark Gadgeteer - C - 25.5mm x 29mm x 24.5mm Spark Gadgeteer - D - 24.5mm x 27mm x 28mm Spark Gadgeteer - E - 24.5mm x 18.5mm x 23.5mm Spark Gadgeteer - F - 20.5mm x 21.5mm x 38.5mm Spark Gadgeteer - G - 29mm x 27.5mm x 27.5mm Base Info: Vulcan - 25mm - RoundComes in 32mm scaleBundle includes all 7 models  Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Base Size: 25mm Base Style: Plain Square Like this model? Click here to check out the rest of our collection from 3DIPStudios   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: 3DIPStudios @3DIPStudios If you would like to follow or support this artist, please check out the link below. instagram.com/3dipstudios

Base Size: 25mm Base Style: Plain Square Bundle includes all 6 models   Like this model? Click here to check out the rest of our collection from 3DIPStudios   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: 3DIPStudios @3DIPStudios If you would like to follow or support this artist, please check out the link below. instagram.com/3dipstudios

Base Size: 25mm Base Style: Plain Square Bundle includes all 6 models   Like this model? Click here to check out the rest of our collection from 3DIPStudios   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: 3DIPStudios @3DIPStudios If you would like to follow or support this artist, please check out the link below. instagram.com/3dipstudios

Approximate size: Specter Minions - A - 32mm x 31mm x 34mm Specter Minions - B - 33mm x 25.5mm x 30.5mm Specter Minions - C - 45mm x 33.5mm x 31.5mm Specter Minions - D - 29.5mm x 39.5mm x 30mm Base Info: Maze - 25mm - RoundComes in 32mm scaleBundle includes all 4 models  Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay