Products

Base Size: 25mm Base Style: Rock Bundle includes all 5 models   Like this model? Click here to check out the rest of our collection from Galaad Miniatures Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC. is a licensed distributor of these 3D prints designed by: Galaad Miniatures @GalaadMiniatures If you would like to follow or support this artist, please check out the links below. patreon.com/galaad facebook.com/galaadminiatures instagram.com/galaad_miniatures myminifactory.com/users/galaad  

Comes in 32mm or 75mm scale For nearly 50 years, the Archmage Zondar Valis direct the Academy of Magic in Altoas, and he looks about the same as he did in his inauguration portrait. Three Kings have passed in this time and he aided them all as best he could. It is said that for him to be replaced, his challenger needs to kill him, but in all this time, not one has been worthy enough to do so. It is unlikely that anyone in the kingdom exists that would be able to defeat Zondar, for he has mastered two schools of magic; illusion and evocation. It is also said that in the last decade, he is spending many nights practicing one more school of magic, one that is forbidden in the Kingdom and is punishable by death.   Like this model? Click here to check out the rest of our collection from White Werewolf Tavern   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: White Werewolf Tavern @WWTavern If you would like to follow or support this artist, please check out the links below. patreon.com/whitewerewolftavern www.instagram.com/wwtavern myminifactory.com/users/WWTavern facebook.com/miniatures3d twitter.com/tavernww

Model is approximately 75mm tall excluding the stand.  For nearly 50 years, the Archmage Zondar Valis direct the Academy of Magic in Altoas, and he looks about the same as he did in his inauguration portrait. Three Kings have passed in this time and he aided them all as best he could. It is said that for him to be replaced, his challenger needs to kill him, but in all this time, not one has been worthy enough to do so. It is unlikely that anyone in the kingdom exists that would be able to defeat Zondar, for he has mastered two schools of magic; illusion and evocation. It is also said that in the last decade, he is spending many nights practicing one more school of magic, one that is forbidden in the Kingdom and is punishable by death.   Like this model? Click here to check out the rest of our collection from White Werewolf Tavern   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: White Werewolf Tavern @WWTavern If you would like to follow or support this artist, please check out the links below. patreon.com/whitewerewolftavern www.instagram.com/wwtavern myminifactory.com/users/WWTavern facebook.com/miniatures3d twitter.com/tavernww

Base Size: Model A - 25mm Model B - 35mm Base Style: Hero Base Bundle includes all 6 models Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Base Size: 30mm Base Style: Dragon's Vault Base - Round Bundle includes all 3 models Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Base Size: 35mm Base Style: Cave Base - Hero Includes all modular pieces pictured so you can mix and match. Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Comes in 32mm scale Base Style: Specialized A vile and deceitful devil. Zurae-ta's goal is to retrieve a magical medallion that trapped Taskmaster Kerrafius. Once she finally retrieves it and sets Kerrafius free, together, they plan on completing an old forgotten ritual that invites a destructive monstrous devil into the Material Plane known as Verkoth the Destroyer of Worlds. The medallion is being safely kept inside the lair of the now-dead mad mage who created the dungeon. The dungeon is hidden deep underground inside a network of caves. The mad mage had fought the forces of Zurae-ta and Kerafius during his time and after years of enslavement under them, he found a way to seal Kerrafius into the magical medallion and placed it onto a Shield Guardian, which is under the protection of a moving Magic Circle spell that prevents Zurae-ta from claiming the medallion herself. Thus, Zurae-ta approaches capable adventurers disguised as a human known as Helena Bran and offers them a good sum of gold to explore the dungeon and retrieve what she claims to be her missing archaeologist husband. She informs unwary adventurers that he went down to explore the cave and has not returned in over a week. Once the party accepts, she gives them a map that shows the location of the dungeon. Depending on the adventurers she comes across, she either joins them on their journey, disguised as a helpless woman, or once the group is out of sight, follows them using her Etherealness ability as they make their way to the dungeon. Zurae-ta has yet to find a party capable of retrieving the medallion for her, with her patience wearing thin, she seeks to recruit other fearsome creatures and unwary residents to do her bidding for her. Like this model? Click here to check out the rest of our collection from White Werewolf Tavern   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: White Werewolf Tavern @WWTavern If you would like to follow or support this artist, please check out the links below. patreon.com/whitewerewolftavern www.instagram.com/wwtavern myminifactory.com/users/WWTavern facebook.com/miniatures3d twitter.com/tavernww

Model is approximately 158mm tall excluding the stand.   A vile and deceitful devil. Zurae-ta's goal is to retrieve a magical medallion that trapped Taskmaster Kerrafius. Once she finally retrieves it and sets Kerrafius free, together, they plan on completing an old forgotten ritual that invites a destructive monstrous devil into the Material Plane known as Verkoth the Destroyer of Worlds. The medallion is being safely kept inside the lair of the now-dead mad mage who created the dungeon. The dungeon is hidden deep underground inside a network of caves. The mad mage had fought the forces of Zurae-ta and Kerafius during his time and after years of enslavement under them, he found a way to seal Kerrafius into the magical medallion and placed it onto a Shield Guardian, which is under the protection of a moving Magic Circle spell that prevents Zurae-ta from claiming the medallion herself. Thus, Zurae-ta approaches capable adventurers disguised as a human known as Helena Bran and offers them a good sum of gold to explore the dungeon and retrieve what she claims to be her missing archaeologist husband. She informs unwary adventurers that he went down to explore the cave and has not returned in over a week. Once the party accepts, she gives them a map that shows the location of the dungeon. Depending on the adventurers she comes across, she either joins them on their journey, disguised as a helpless woman, or once the group is out of sight, follows them using her Etherealness ability as they make their way to the dungeon. Zurae-ta has yet to find a party capable of retrieving the medallion for her, with her patience wearing thin, she seeks to recruit other fearsome creatures and unwary residents to do her bidding for her.   Like this model? Click here to check out the rest of our collection from White Werewolf Tavern   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: White Werewolf Tavern @WWTavern If you would like to follow or support this artist, please check out the links below. patreon.com/whitewerewolftavern www.instagram.com/wwtavern myminifactory.com/users/WWTavern facebook.com/miniatures3d twitter.com/tavernww

Comes in 75mm scale Base Style: Specialized A vile and deceitful devil. Zurae-ta's goal is to retrieve a magical medallion that trapped Taskmaster Kerrafius. Once she finally retrieves it and sets Kerrafius free, together, they plan on completing an old forgotten ritual that invites a destructive monstrous devil into the Material Plane known as Verkoth the Destroyer of Worlds. The medallion is being safely kept inside the lair of the now-dead mad mage who created the dungeon. The dungeon is hidden deep underground inside a network of caves. The mad mage had fought the forces of Zurae-ta and Kerafius during his time and after years of enslavement under them, he found a way to seal Kerrafius into the magical medallion and placed it onto a Shield Guardian, which is under the protection of a moving Magic Circle spell that prevents Zurae-ta from claiming the medallion herself. Thus, Zurae-ta approaches capable adventurers disguised as a human known as Helena Bran and offers them a good sum of gold to explore the dungeon and retrieve what she claims to be her missing archaeologist husband. She informs unwary adventurers that he went down to explore the cave and has not returned in over a week. Once the party accepts, she gives them a map that shows the location of the dungeon. Depending on the adventurers she comes across, she either joins them on their journey, disguised as a helpless woman, or once the group is out of sight, follows them using her Etherealness ability as they make their way to the dungeon. Zurae-ta has yet to find a party capable of retrieving the medallion for her, with her patience wearing thin, she seeks to recruit other fearsome creatures and unwary residents to do her bidding for her.   Like this model? Click here to check out the rest of our collection from White Werewolf Tavern   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: White Werewolf Tavern @WWTavern If you would like to follow or support this artist, please check out the links below. patreon.com/whitewerewolftavern www.instagram.com/wwtavern myminifactory.com/users/WWTavern facebook.com/miniatures3d twitter.com/tavernww