All Models

Approximate size: Carnivorous 1Flower - 50mm x 47mm x 39mm Carnivorous 2Flowers - 47.5mm x 36.5mm x 39.5mm Carnivorous 4Heads - 45.5mm x 24mm x 39.5mm Carnivorous Big Head - 47.5mm x 31.5mm x 37.5mm Carnivorous Spike Heads - 42.5mm x 32.5mm x 45mm Mushrooms - 44.5mm x 32mm x 32.5mm Rock Mud - 42.5mm x 34mm x 42mm Rock Mushrooms - 58.5mm x 41.5mm x 42mm Skeleton - 62mm x 44mm x 31mm Small Flowers - 37.5mm x 46mm x 32.5mm Spider Eggs - 88mm x 46mm x 26mm Spikes - 55.5mm x 32mm x 39.5mm Trunks - 51mm x 36.5mm x 32mm Trunk Shrooms - 51.5mm x 22mm x 35mm Trunk Spikes - 75.5mm x 42.5mm x 38mm Comes in 32mm scale Bundle includes all 15 models Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Big Rock Tree - 165mm x 119.5mm x 107mm Dead Tilted Tree - 132mm x 67mm x 79mm Savanna Tree A - 101.5mm x 99mm x 127.5mm Savanna Tree B - 101.5mm x 88.5mm x 115mm Savanna Tree C - 119mm x 86mm x 93.5mm Tree Antilope - 156.5mm x 81mm x 87.5mm Tree Hyenas - 212.5mm x 116.5mm x 117.5mm Tree Lioness - 141.5mm x 107.5mm x 110.5mm Tree Pond A - 212.5mm x 116.5mm x 117.5mm Tree Pond B - 151.5mm x 105.5mm x 131.5mm Tree Two Birds - 183.5mm x 113mm x 124mm Comes in 32mm scale Bundle includes all 11 models Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Acacia Tree A - 181.5mm x 105.5mm x 98.5mm Acacia Tree B - 169mm x 144mm x 146.5mm Acacia Tree C - 185mm x 140mm x 130mm Acacia Tree D - 153mm x 167.5mm x 148.5mm Acacia Tree E - 119mm x 83mm x 77.5mm Candelabra Tree - 83mm x 47.5mm x 56.5mm Dead Tree A - 57mm x 31.5mm x 61.5mm Dead Tree B - 57mm x 40mm x 90mm Dead Tree C - 59mm x 45.5mm x 91.5mm Dead Tree D - 83mm x 44mm x 46.5mm Meerkat Rock - 63mm x 39.5mm x 51mm Rock Bit A - 79.5mm x 57.5mm x 46.5mm Rock Bit B - 70mm x 54mm x 46mm Comes in 32mm scale Bundle includes all 13 models Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Big Rock w Acacia A - 105mm x 85.5mm x 67.5mm Big Rock w Acacia B - 86mm x 75mm x 76.5mm Big Rock w Acacia C - 91.5mm x 84.5mm x 67mm Big Rock w Acacia D - 123.5mm x 90.5mm x 78.5mm Bent Trunk - 61.5mm x 50mm x 48.5mm Big Rock Dry Tree - 87.5mm x 56.5mm x 49.5mm Big Rock Moss A - 58.5mm x 63.5mm x 30.5mm Big Rock Moss B - 75mm x 54.5mm x 34.5mm Little Bird - 52.5mm x 40.5mm x 40.5mm Meerkat - 40.5mm x 28mm x 30mm Mice - 55.5mm x 45.5mm x 37.5mm Rooted Out Tree - 94.5mm x 71mm x 32mm Stump - 38.5mm x 26.5mm x 36mm Stump Bent Branch - 83mm x 25mm x 37.5mm Tilted Rock - 58.5mm x 64mm x 33.5mm Comes in 32mm scale Bundle includes all 15 models Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Bamboo Tree Hill - 51mm x 78mm x 97.5mm Bamboo Trees - 75mm x 94.5mm x 82mm Bamboo Flowers - 38mm x 59.5mm x 41mm Bamboos A - 39.5mm x 55.5mm x 62.5mm Bamboos B - 33mm x 71mm x 58.5mm Bamboos C - 28.5mm x 54mm x 41mm Pond A - 157.5mm x 149mm x 33mm Pond B - 161mm x 154.5mm x 27.5mm Flowers Bit A - 40.5mm x 47mm x 30.5mm Flowers Bit B - 34mm x 51.5mm x 29.5mm Log Bridge - 71.5mm x 93mm x 32mm Small Bonsai - 60.5mm x 101mm x 42.5mm Comes in 32mm scale Bundle includes all 13 models Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Whale Skeletons - 138.5mm x 184mm x 107.5mm Kraken Tentacles - 122.5mm x 140mm x 82mm Reef Rocks A - 120.5mm x 138mm x 114.5mm Reef Rocks B - 98.5mm x 119mm x 75mm Reef Rocks C - 130mm x 186.5mm x 109.5mm Reef Arch A - 158.5mm x 115.5mm x 88.5mm Reef Arch B - 142.5mm x 166mm x 92.5mm Sunken Helm - 47.5mm x 58.5mm x 49.5mm Sunken Anchor - 62mm x 86.5mm x 46.5mm Sunken Ship - 119.5mm x 140mm x 98mm Sunken Chest - 73.5mm x 106.5mm x 47.5mm Sunken Barrels - 60mm x 78mm x 42.5mm Comes in 32mm scale Bundle includes all 12 models Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Anemone Rocks - 69.5mm x 92mm x 67.5mm Brain Coral A - 70.5mm x 96.5mm x 61mm Brain Coral B - 59.5mm x 87.5mm x 59mm Brain Coral C - 72.5mm x 97.5mm x 69.5mm Brain Coral Rock - 94mm x 105mm x 65mm Branched Coral - 69mm x 118.5mm x 80mm Fish Anemone - 121mm x 106.5mm x 71mm Rocks Corals A - 66.5mm x 91mm x 86mm Rocks Corals B - 89.5mm x 86.5mm x 72.5mm Tube Corals A - 95mm x 146mm x 89mm Tube Corals B - 45mm x 82.5mm x 49..5mm Actinia Anemone - 55.5mm x 69mm x 26.5mm Small Anemone - 77mm x 88.5mm x 48mm Small Branched Coral - 70mm x 84mm x 51.5mm Comes in 32mm scale Bundle includes all 14 models Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Anchor - 72.5mm x 44mm x 34mm Big Brain Coral - 91mm x 50.5mm x 30.5mm Big Clamp - 57mm x 48mm x 28.5mm Big Rock - 62mm x 80mm x 53.5mm Boat Wreckage - 74.5mm x 75.5mm x 29.5mm Brain Coral - 76.5mm x 52.5mm x 33.5mm Brain Coral Rock - 69mm x 57mm x 34mm Coral Bottles - 51mm x 40.5mm x 19.5mm Crab Rock - 105.5mm x 38.5mm x 50mm Fish Coral - 85.5mm x 65.5mm x 62.5mm Layered Rock - 69.5mm x 58mm x 57.5mm Misc Reef - 70mm x 46.5mm x 26.5mm Starfish Coral - 62.5mm x 52.5mm x 40.5mm Starfish Reef - 57.5mm x 53mm x 41mm Tube Coral Rock - 73.5mm x 60mm x 43mm Comes in 32mm scale Bundle includes all 15 models Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Cave Wall M - 125.5mm x 38.5mm x 80mm Cave Wall S 01 - 68.5mm x 29.5mm x 69.5mm Cave Wall S 02 - 68.5mm x 27.5mm x 73mm Desert Wall M - 125.5mm x 35.5mm x 86.5mm Desert Wall S 01 - 68.5mm x 26mm x 75.5mm Desert Wall S 02 - 68.5mm x 23mm x 73.5mm Frostlands Wall M - 125.5mm x 39.5mm x 77.5mm Frostlands Wall S 01 - 68.5mm x 27.5mm x 74mm Frostlands Wall S 02 - 68.5mm x 32mm x 75mm Jungle Wall M - 125.5mm x 30mm x 80mm Jungle Wall S 01 - 68.5mm x 29.5mm x 66mm Jungle Wall S 02 - 68.5mm x 27mm x 68mm Ocean Wall M - 125.5mm x 40.5mm x 77mm Ocean Wall S 01 - 68.5mm x 35.5mm x 73mm Ocean Wall S 02 - 68.5mm x 35.5mm x 74.5mm Oriental Wall M - 125.5mm x 34mm x 88.5mm Oriental Wall S 01 - 68.5mm x 31mm x 76.5mm Oriental Wall S 02 - 68.5mm x 33mm x 74mm Savanna Wall M - 125.5mm x 33.5mm x 87mm Savanna Wall S 01 - 68.5mm x 39.5mm x 73.5mm Savanna Wall S 02 - 68.5mm x 28.5mm x 73.5mm Swamp Wall M - 125.5mm x 31.5mm x 70mm Swamp Wall S 01 - 68.5mm x 35.5mm x 73.5mm Swamp Wall S 02 - 68.5mm x 31.5mm x 69.5mm Volcano Wall M - 125.5mm x 37.5mm x 77mm Volcano Wall S 01 - 28.5mm x 25.5mm x 73mm Volcano Wall S 02 - 68.5mm x 23.5mm x 74.5mm Wastelands Wall M - 125.5mm x 37mm x 78.5mm Wastelands Wall S 01 - 68.5mm x 27.5mm x 73.5mm Wastelands Wall S 02 - 68.5mm x 28.5mm x 69mm Comes in 32mm scale Models include 2 end caps Set includes all 3 models & 4 end caps Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Cave Platform - 234.5mm x 153mm x 107.5mm Desert Platform - 182.5mm x 197.5mm x 44mm Forest Platform - 200mm x 163mm x 204.5mm Frostlands Platform - 228.5mm x 129mm x 98mm Jungle Platform - 224.5mm x 149mm x 130.5mm Ocean Platform - 260mm x 168.5mm x 143mm Oriental Platform - 211mm x 140.5mm x 111mm Savanna Platform - 188.5mm x 123mm x 118mm Swamp Platform - 206.5mm x 157.5mm x 115.5mm Volcano Platform - 234.5mm x 177mm x 120.5mm Wastelands Platform - 211mm x 155mm x 74mm Comes in 32mm scale Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Lettuce Z-Tile - 66mm x 105mm x 8.5mm Pumpkin Z-Tile - 66mm x 105mm x 13.5mm Radish Z-Tile - 66mm x 105mm x 8.5mm Rice Z-Tile - 66mm x 101mm x 7.5mm Sown Field Z-Tile - 66mm x 105mm x 4.5mm Sugar Cane Z-Tile - 66mm x 105mm x 30.5mm Wheat Z-Tile - 66mm x 105mm x 32.5mm Comes in 32mm scale Bundle includes all 7 models Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Flower - Modular Bit A - 105.5mm x 87.5mm x 34mm Flower - Modular Bit B - 108.5mm x 90mm x 27.5mm Flower - Modular Bit C - 71mm x 87mm x 27.5mm Flower - Modular Bit D - 71mm x 66mm x 32mm Flower - Modular Bit E - 104.5mm x 73.5mm x 28mm Flower - Modular Bit F - 74.5mm x 70mm x 26mm Flower - Modular Bit G - 137mm x 72.5mm x 30.5mm Flower - Modular Bit H - 113.5mm x 112.5mm x 31.5mm Comes in 32mm scale Bundle includes all 8 models Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Flax - Small - 22.5mm x 21mm x 22.5mm Flax - Medium - 41mm x 23.5mm x 25mm Flax - Big - 41mm x 42mm x 46mm Flax - Corner - 21.5mm x 21mm x 23mm Grass - Small - 19.5mm x 19.5mm x 22mm Grass - Medium - 39.5mm x 20.5mm x 23.5mm Grass - Big - 39.5mm x 40.5mm x 22.5mm Grass - Corner - 19.5mm x 19.5mm x 22mm Lavander - Small - 19.5mm x 19.5mm x 32mm Lavander - Medium - 39.5mm x 20mm x 31.5mm Lavander - Big - 40mm x 40mm x 32.5mm Lavander - Corner - 19.5mm x 19.5mm x 31.5mm Mayweed - Small - 24mm x 21mm x 25mm Mayweed - Medium - 41.5mm x 23mm x 25.5mm Mayweed - Big - 41.5mm x 41mm x 25.5mm Mayweed - Corner - 21mm x 22mm x 25mm Tansy - Small - 25.5mm x 25.5mm x 26mm Tansy - Medium - 41.5mm x 25.5mm x 29mm Tansy - Big - 42mm x 43mm x 30mm Tansy - Corner - 25.5mm x 25.5mm x 26mm Comes in 32mm scale Bundle includes all 20 models  Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Fire Burst - 81mm x 98mm x 64.5mm Ice Burst - 89mm x 89mm x 64mm Water Beast - 85.5mm x 128.5mm x 70mm Acid Pool - 70.5mm x 79mm x 20.5mm Impact Blast - 101.5mm x 131mm x 37mm Comes in 32mm scale Bundle includes all 5 models  Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Floating Crystal - 76mm x 108mm x 70.5mm Giant Tangled Rune - 50mm x 74.5mm x 71.5mm Hidden Rune - 71.5mm x 72.5mm x 85mm Stump Crystals - 77.5mm x 107mm x 69.5mm Stump Rune - 91.5mm x 96.5mm x 92mm Tangled Crystals - 79.5mm x 107mm x 65mm Tangled Rocks - 81mm x 125.5mm x 85mm Comes in 32mm scale Bundle includes all 7 models Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Floating Bit Crystals - 143mm x 150mm x 141mm Floating Bridge - 114.5mm x 242.5mm x 117.5mm Floating Dry Tree - 132.5mm x 136.5mm x 138mm Floating Ponds - 175mm x 192mm x 130mm Floating Tree A - 115.5mm x 130mm x 186mm Floating Tree B - 108mm x 117.5mm x 187.5mm Comes in 32mm scale Bundle includes all 6 models Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Double Waterfall - 142.5mm x 198.5mm x 146.5mm Side Tree Waterfall - 121mm x 145mm x 172.5mm Waterfall Pond - 179.5mm x 248mm x 169.5mm Waterfall Tree - 172.5mm x 236mm x 203mm Jungle River L - 116mm x 112.5mm x 25.5mm Jungle River S 01 - 133mm x 101mm x 39.5mm Jungle River S 02 - 136.5mm x 110mm x 35.5mm Jungle River I 01 - 133mm x 92mm x 40mm Jungle River I 02 - 133mm x 905mm x 42mm Jungle River I 03 - 133mm x 94mm x 45mm Jungle River End - 90.5mm x 96.5mm x 34mm Comes in 32mm scale Bundle includes all 12 sets     Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Mini Waterfall A - 66.5mm x 76mm x 53.5mm Mini Waterfall B - 56mm x 71.5mm x 45mm Small Trunk - 73mm x 75mm x 62.5mm Big Bush Rocks - 51mm x 78mm x 36mm Layered Trunk - 46mm x 55.5mm x 33.5mm Piled Rocks - 48mm x 66.5mm x 24.5mm Jungle Rock Group A - 59mm x 62.5mm x 43.5mm Jungle Rock Group B - 67mm x 88.5mm x 39.5mm Tall Stump - 46mm x 55.5mm x 51mm Tilted Stump - 58.5mm x 76mm x 41.5mm Cashew Tree - 110.5mm x 130mm x 135.5mm Kapok Tree - 105mm x 125.5mm x 111.5mm Short Kapok Tree - 98.5mm x 167mm x 96.5mm Slim Cashew Tree - 65.5mm x 70.5mm x 135mm Tree on Rock - 106mm x 127mm x 125.5mm Comes in 32mm scale   Bundle includes all 15 models     Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Armadillo - 92.5mm x 42mm x 32mm Big Flower Rock - 70mm x 86.5mm x 42mm Big Tangled Rock - 89.5mm x 65mm x 43mm Chameleon - 81.5mm x 48mm x 40mm Flower Foliage - 92mm x 72mm x 41.5mm Flowers Rocks - 69.5mm x 78.5mm x 31.5mm Lizard & Rock - 85.5mm x 48mm x 66mm Long Bent Tree - 52mm x 119mm x 43mm Plants Rocks - 82mm x 53mm x 37mm Rocks Foliage - 70mm x 44.5mm x 34.5mm Small Tree Snake - 81mm x 39.5mm x 44.5mm Tree Arch - 81.5mm x 41mm x 64.5mm Trunk Butterfly - 77mm x 61mm x 33mm Trunk Foliage - 54.5mm x 54mm x 39.5mm Twisted Tree - 117.5mm x 78.5mm x 63mm Comes in 32mm scaleBundle includes all 15 models  Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Bent Shroom - 82.5mm x 115mm x 93mm Giant Shroom Tree - 67.5mm x 80mm x 93.5mm Shroom Platform 01 - 97mm x 102mm x 63.5mm Shroom Platform 02 - 94.5mm x 107.5mm x 53.5mm Shroom Platform 03 - 91mm x 124mm x 65.5mm Shroom Platform 04 - 85mm x 100mm x 54mm Shroom Platform 05 - 137.5mm x 111mm x 60.5mm Claveria Tree - 74mm x 60.5mm x 70.5mm Tree w Shrooms - 51.5mm x 73mm x 87.5mm Veil Shroom Tree - 47.5mm x 62.5mm x 68.5mm Comes in 32mm scaleBundle includes all 10 models  Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Big Base Shroom - 45.5mm x 44.5mm x 48.5mm Big Rock Shroom 01 - 54.5mm x 64mm x 47.5mm Big Rock Shroom 02 - 45mm x 64.5mm x 41mm Big Rock Shroom 03 - 50mm x 53mm x 42mm Layered Shroom - 50.5mm x 49.5mm x 50mm Layered Tilt Shroom - 52mm x 81mm x 62mm Pumpkin Shroom - 60mm x 70mm x 51mm Shroom Group 01 - 53mm x 57mm x 51mm Shroom Group 02 - 39.5mm x 82.5mm x 43mm Shroom Tangle 01 - 40mm x 51.5mm x 41.5mm Shroom Tangle 02 - 55.5mm x 67.5mm x 60.5mm Stump Shroom - 29mm x 32.5mm x 30.5mm Tall Shrooms 01 - 28mm x 40mm x 41mm Tall Shrooms 02 - 42mm x 53.5mm x 38.5mm Tangled Shroom 01 - 44.5mm x 50.5mm x 56mm Tangled Shroom 02 - 51.5mm x 54.5mm x 65mm Tapered Shrooms - 41.5mm x 46mm x 57mm Tripod Shroom - 48.5mm x 69.5mm x 66mm Veil Shroom 01 - 43mm x 53mm x 52.5mm Veil Shroom 02 - 44mm x 51.5mm x 47mm Comes in 32mm scaleBundle includes all 20 models  Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Ice Arch 01 - 114mm x 147mm x 73.5mm Ice Arch 02 - 119.5mm x 154.5mm x 114mm Ice Arch 03 - 90mm x 87mm x 100.5mm Ice Bridge 01 - 73.5mm x 221mm x 52mm Ice Bridge 02 - 77.5mm x 182mm x 57.5mm Ice Bridge 03 - 80.5mm x 195.5mm x 49mm Ice Formation 01 - 67.5mm x 75.5mm x 67.5mm Ice Formation 02 - 82.5mm x 72mm x 59.5mm Ice Formation 03 - 63mm x 67.5mm x 92.5mm Ice Formation & Rabbit - 87.5mm x 96.5mm x 80mm Snowy Tree - 71.5mm x 75.5mm x 78.5mm Snowy Tree & Fox - 70mm x 91mm x 104mm Snowy Tree & Rock - 94.5mm x 123mm x 100.5mm Snowy Tree Sleep Rabbit - 93.5mm x 87mm x 77mm Snowy Trees - 110.5mm x 91mm x 83mm Comes in 32mm scaleBundle includes all 15 models  Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Giant Tree - 95.5mm x 78.5mm x 156mm Short Tree - 115mm x 93mm x 115mm Spuce Tree - 55mm x 55mm x 116mm Thin Tree - 91mm x 68mm x 135.5mm Wide Tree - 101mm x 93.5mm x 131mm Dead Trees A - 154mm x 72.5mm x 102.5mm Dead Trees B - 56.5mm x 61.5mm x 105.5mm Dead Trees C - 127mm x 73mm x 139mm Dead Trees D - 94mm x 62.5mm x 107mm Dead Trees E - 134mm x 63.5mm x 68.5mm River Tile Curve 01 - 207mm x 198mm x 24.5mm River Tile Curve 02 - 189.5mm x 200.5mm x 26mm River Tile End 01 - 131mm x 144mm x 23.5mm River Tile End 02 - 133mm x 144mm x 22mm River Tile I 01 - 126mm x 160mm x 21.5mm River Tile I 02 - 126mm x 161.5mm x 20.5mm River Tile S 01 - 207mm x 191.5mm x 26.5mm River Tile S 02 - 200.5mm x 206.5mm x 24.5mm River Tile Y - 202mm x 215.5mm x 27mm Waterfall - 144mm x 187.5mm x 121.5mm Comes in 32mm scaleBundle includes all 20 models  Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Big Rock A - 97mm x 72mm x 74mm Big Rock B - 67mm x 57.5mm x 59.5mm Cave A - 96.5mm x 78mm x 50mm Cave B - 100.5mm x 85mm x 52mm Rock Formation A - 80.5mm x 66.5mm x 79.5mm Rock Formation B - 94.5mm x 79mm x 60.5mm Rock Formation C - 71mm x 69.5mm x 75.5mm Rock Formation D - 81mm x 65mm x 66.5mm Forest Piled Rocks A - 80mm x 51mm x 38mm Forest Piled Rocks B - 89mm x 48mm x 44.5mm Comes in 32mm scaleBundle includes all 11 models  Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: 1Pine - 80mm x 62.5mm x 82mm 2Pines - 101mm x 81.5mm x 74.5mm Pine w Tree - 117.5mm x 71.5mm x 80mm Bent Trunk - 79.5mm x 46.5mm x 41mm Broken Trunk - 68mm x 43.5mm x 28.5mm Dragon Flies - 70mm x 42.5mm x 29mm Mushrooms Porcupine - 57mm x 41mm x 32mm Rock Frog - 88mm x 61.5mm x 29mm Rock Plants - 88mm x 39.5mm x 32.5mm Rock Squirrel - 82.5mm x 84mm x 49mm Stump Flowers - 59.5mm x 55mm x 45mm Stump Mushrooms - 44mm x 35.5mm x 30.5mm Torn Trunk - 78mm x 40.5mm x 29.5mm Trunk Birds - 101.5mm x 60mm x 31.5mm Trunks - 54.5mm x 42mm x 44.5mm Comes in 32mm scaleBundle includes all 15 models  Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay