All Models

Approximate size: Croc - Bare A - 22mm x 70mm x 17mm Croc - Bare B - 35mm x 32mm x 26mm Croc - Explorer A - 23mm x 50mm x 23.5mm Croc - Explorer B - 25.5mm x 49.5mm x 30mm Croc - Mount A - 22mm x 67.5mm x 19mm Croc - Mount B - 27.5mm x 55.5mm x 17mm Base Info: Croc - Bare A - 50mm - Swamp Croc - Bare B - 35mm - Grass and Dirt Croc - Explorer A - 50mm - Swamp Croc - Explorer B - 35mm - Grass and Dirt Croc - Mount A - 50mm - Grass and Dirt Croc - Mount B - 50mm - Swamp Comes in 32mm scale Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Bao - Aztec Warrior A - 32mm x 50.5mm x 33.5mm Bao - Aztec Warrior B - 22.5mm x 26.5mm x 29mm Bao - Bare A - 27.5mm x 27mm x 13.5mm Bao - Bare B - 24mm x 38mm x 41.5mm Bao - Explorer A - 29.5mm x 23.5mm x 28mm Bao - Explorer B - 34mm x 27mm x 33.5mm Base Info: Bao - Aztec Warrior A - 35mm - Grass and Dirt Bao - Aztec Warrior B - 30mm - Grass and Dirt Bao - Bare A - 30mm - Swamp Bao - Bare B - 30mm - Swamp Bao - Explorer A - 35mm - Swamp Bao - Explorer B - 35mm - Grass and Dirt Comes in 32mm scale Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Moonk - Alchemist A - 20mm x 18mm x 22mm Moonk - Alchemist B - 19.5mm x 19mm x 14.5mm Moonk - Bare A - 17.5mm x 14.5mm x 15.5mm Moonk - Bare B - 19mm x 23.5mm x 13.5mm Moonk - Merchant A - 16mm x 13mm x 14mm Moonk - Merchant B - 20mm x 24.5mm x 19mm Base Info: Moonk - Alchemist A - 25mm - Wood Moonk - Alchemist B - 25mm - Wood Moonk - Bare A - 25mm - Grass and Dirt Moonk - Bare B - 25mm - Grass and Dirt Moonk - Merchant A - 25mm - Grass and Dirt Moonk - Merchant B - 25mm - Wood Comes in 32mm scale Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Worlo - Bare A - 38mm x 40.5mm x 26mm Worlo - Bare B - 44.5mm x 32mm x 33mm Worlo - Captain A - 38mm x 37.5mm x 35mm Worlo - Captain B - 45mm x 35mm x 35.5mm Worlo - Explorer A - 37mm x 40.5mm x 33mm Worlo - Explorer B - 44.5mm x 38mm x 32mm Base Info: Worlo - Bare A - 50mm - Ice Worlo - Bare B - 50mm - Sand Worlo - Captain A - 50mm - Sand Worlo - Captain B - 50mm - Sand Worlo - Explorer A - 50mm - Ice Worlo - Explorer B - 50mm - Ice Comes in 32mm scale Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Pengu - Bare A - 14mm x 16.5mm x 24mm Pengu - Bare B - 15mm x 17.5mm x 24.5mm Pengu - Fisher A - 26.5mm x 28.5mm x 25.5mm Pengu - Fisher B - 16mm x 19.5mm x 26.5mm Pengu - Pirate A - 16mm x 17.5mm x 24mm Pengu - Pirate B - 16.5mm x 14mm x 24.5mm Base Info: Pengu - Bare A - 15mm - Ice Pengu - Bare B - 15mm - Ice Pengu - Fisher A - 25mm - Ice Pengu - Fisher B - 15mm - Ice Pengu - Pirate A - 15mm - Ice Pengu - Pirate B - 15mm - Ice Comes in 32mm scale Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Mus - Bare A - 44.5mm x 34.5mm x 80mm Mus - Bare B - 47mm x 65mm x 63.5mm Mus - Explorer A - 34mm x 55.5mm x 67.5mm Mus - Explorer B - 53mm x 64mm x 46mm Mus - Merchant A - 42.5mm x 60mm x 57mm Mus - Merchant B - 44.5mm x 63.5mm x 50mm Base Info: Mus - Bare A - 50mm - Grass and Dirt Mus - Bare B - 50mm - Ice Mus - Explorer A - 50mm - Grass and Dirt Mus - Explorer B - 50mm - Ice Mus - Merchant A - 50mm - Grass and Dirt Mus - Merchant B - 50mm - Ice Comes in 32mm scale Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Gof - Archer A - 28mm x 36mm x 39mm Gof - Archer B - 21mm x 53mm x 35.5mm Gof - Bare A - 20.5mm x 47mm x 25.5mm Gof - Bare B - 39.5mm x 23.5mm x 24mm Gof - Explorer A - 16.5mm x 47mm x 26.5mm Gof - Explorer B - 45mm x 24.5mm x 34mm Base Info: Gof - Archer A - 35mm - Ice Gof - Archer B - 35mm - Ice Gof - Bare A - 35mm - Ice Gof - Bare B - 35mm - Grass and Dirt Gof - Explorer A - 35mm - Grass and Dirt Gof - Explorer B - 35mm - Grass and Dirt Comes in 32mm scale Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Vatt - Bare A - 38mm x 21.5mm x 14mm Vatt - Bare B - 44.5mm x 20.5mm x 29mm Vatt - Thief A - 44mm x 20mm x 24.5mm Vatt - Thief B - 31.5mm x 20.5mm x 19.5mm Vatt - Wizard A - 21.5mm x 14mm x 16.5mm Vatt - Wizard B - 32mm x 23mm x 25mm Base Info: Vatt - Bare A - 15mm - Grass Vatt - Bare B - 15mm - Dirt Vatt - Thief A - 15mm - Dirt Vatt - Thief B - 15mm - Grass Vatt - Wizard A - 15mm - Grass Vatt - Wizard B - 15mm - Dirt Comes in 32mm scale Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Tukan - Bare A - 19.5mm x 13.5mm x 14mm Tukan - Bare B - 17mm x 19mm x 30.5mm Tukan - Explorer A - 23mm x 20mm x 24mm Tukan - Explorer B - 17mm x 12mm x 14.5mm Tukan - Paleontologist A - 20.5mm x 16.5mm x 21mm Tukan - Paleontologist B - 17.5mm x 21mm x 23.5mm Base Info: Tukan - Bare A - 15mm - Dirt Tukan - Bare B - 25mm - Dirt Tukan - Explorer A - 15mm - Dirt Tukan - Explorer B - 15mm - Grass and Dirt Tukan - Paleontologist A - 15mm - Grass and Dirt Tukan - Paleontologist B - 25mm - Dirt Comes in 32mm scale Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Pelik - Aviator A - 22mm x 20mm x 22mm Pelik - Aviator B - 33.5mm x 24.5mm x 26mm Pelik - Bare A - 17.5mm x 22mm x 25.5mm Pelik - Bare B - 22.5mm x 23mm x 22mm Pelik - Sailor A - 32mm x 20mm x 24.5mm Pelik - Sailor B - 17.5mm x 25.5mm x 27mm Base Info: Pelik - Aviator A - 25mm - Sand Pelik - Aviator B - 25mm - Dirt Pelik - Bare A - 25mm - Dirt Pelik - Bare B - 25mm - Sand Pelik - Sailor A - 25mm - Sand Pelik - Sailor B - 25mm - Dirt Comes in 32mm scale Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Ou - Bare A - 19.5mm x 26.5mm x 27.5mm Ou - Bare B - 13.5mm x 20.5mm x 19.5mm Ou - Explorer A - 28mm x 27mm x 17.5mm Ou - Explorer B - 24.5mm x 15mm x 15.5mm Ou - Wizard A - 22.5mm x 24.5mm x 18mm Ou - Wizard B - 18.5mm x 11mm x 20mm Base Info: Ou - Bare A - 25mm - Dirt Ou - Bare B - 15mm - Wood Ou - Explorer A - 25mm - Dirt Ou - Explorer B - 25mm - Dirt Ou - Wizard A - 15mm - Wood Ou - Wizard B - 15mm - Wood Comes in 32mm scale Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Aigle - Bare A - 36.5mm x 17.5mm x 33mm Aigle - Bare B - 18.5mm x 17.5mm x 58.5mm Aigle - Explorer A - 35.5mm x 18.5mm x 33.5mm Aigle - Explorer B - 29.5mm x 18mm x 59mm Aigle - Messenger A - 37mm x 19mm x 30.5mm Aigle - Messenger B - 19mm x 20.5mm x 57mm Base Info: Aigle - Bare A - 15mm - Dirt Aigle - Bare B - 25mm - Dirt Aigle - Explorer A - 15mm - Dirt Aigle - Explorer B - 25mm - Dirt Aigle - Messenger A - 15mm - Dirt Aigle - Messenger B - 25mm - Dirt Comes in 32mm scale Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Iama - Alchemist A - 14mm x 25.5mm x 39mm Iama - Alchemist B - 26mm x 36.5mm x 42.5mm Iama - Bare A - 20mm x 31.5mm x 28.5mm Iama - Bare B - 14mm x 25.5mm x 36.5mm Iama - Explorer A - 19.5mm x 37mm x 28.5mm Iama - Explorer B - 25.5mm x 29.5mm x 44mm Base Info: Iama - Alchemist A - 25mm - Grass and Dirt Iama - Alchemist B - 35mm - Grass and Dirt Iama - Bare A - 25mm - Forest Iama - Bare B - 25mm - Forest Iama - Explorer A - 35mm - Forest Iama - Explorer B - 35mm - Grass and Dirt Comes in 32mm scale Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Sloo - Bare A - 21mm x 26mm x 17mm Sloo - Bare B - 30.5mm x 23mm x 30mm Sloo - Explorer A - 20.5mm x 27mm x 21.5mm Sloo - Explorer B - 28mm x 19mm x 29mm Sloo - Shaman A - 29mm x 24mm x 16.5mm Sloo - Shaman B - 15mm x 14.5mm x 22.5mm Base Info: Sloo - Bare A - 25mm - Grass and Dirt Sloo - Bare B - 30mm - Grass and Dirt Sloo - Explorer A - 25mm - Grass and Dirt Sloo - Explorer B - 25mm - Grass and Dirt Sloo - Shaman A - 30mm - Grass and Dirt Sloo - Shaman B - 25mm - Grass and Dirt Comes in 32mm scale Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Kualaa - Alchemist A - 15mm x 10.5mm x 20mm Kualaa - Alchemist B - 15mm x 11.5mm x 17mm Kualaa - Bare A - 13mm x 9.5mm x 12mm Kualaa - Bare B - 12.5mm x 9mm x 22mm Kualaa - Merchant A - 17.5mm x 17mm x 18.5mm Kualaa - Merchant B - 10.5mm x 14mm x 16.5mm Base Info: Kualaa - Alchemist A - 15mm - Wood Kualaa - Alchemist B - 15mm - Wood Kualaa - Bare A - 15mm - Grass and Dirt Kualaa - Bare B - 15mm - Grass and Dirt Kualaa - Merchant A - 15mm - Wood Kualaa - Merchant B - 15mm - Grass and Dirt Comes in 32mm scale Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Got - Bare A - 18.5mm x 30mm x 29.5mm Got - Bare B - 12mm x 25mm x 26mm Got - Explorer A - 19.5mm x 30.5mm x 35mm Got - Explorer B - 13mm x 34mm x 27mm Got - Warrior A - 16.5mm x 26.5mm x 18.5mm Got - Warrior B - 13mm x 25.5mm x 23.5mm Base Info: Got - Bare A - 30mm - Grass and Dirt Got - Bare B - 25mm - Grass and Dirt Got - Explorer A - 30mm - Grass and Dirt Got - Explorer B - 25mm - Grass and Dirt Got - Warrior A - 25mm - Grass and Dirt Got - Warrior B - 25mm - Grass and Dirt Comes in 32mm scale Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Chameo - Bare A - 18mm x 16mm x 11.5mm Chameo - Bare B - 14mm x 10mm x 32.5mm Chameo - Explorer A - 21.5mm x 14mm x 15mm Chameo - Explorer B - 10mm x 18.5mm x 43.5mm Chameo - Wizard A - 11.5mm x 16mm x 8.5mm Chameo - Wizard B - 13.5mm x 17.5mm x 20mm Base Info: Chameo - Bare A - 15mm - Grass and Dirt Chameo - Bare B - 15mm - Grass Chameo - Explorer A - 15mm - Grass and Dirt Chameo - Explorer B - 15mm - Grass Chameo - Wizard A - 15mm - Grass Chameo - Wizard B - 15mm - Grass and Dirt Comes in 32mm scale Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Tao - Bare A - 29.5mm x 39mm x 45mm Tao - Bare B - 26.5mm x 26.5mm x 29.5mm Tao - Collector A - 30.5mm x 35mm x 34mm Tao - Collector B - 45.5mm x 26.5mm x 27mm Tao - Explorer A - 28.5mm x 36mm x 31mm Tao - Explorer B - 22.5mm x 38mm x 29.5mm Base Info: Tao - Bare A - 35mm - Grass and Dirt Tao - Bare B - 35mm - Grass Tao - Collector A - 50mm - Grass and Dirt Tao - Collector B - 35mm - Grass Tao - Explorer A - 35mm - Grass and Dirt Tao - Explorer B - 50mm - Grass Comes in 32mm scale Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Redd - Adventurer A - 16mm x 27mm x 17mm Redd - Adventurer B - 21mm x 21.5mm x 16mm Redd - Bare A - 15.5mm x 29mm x 13mm Redd - Bare B - 20.5mm x 20.5mm x 15mm Redd - Monk A - 15.5mm x 23.5mm x 17mm Redd - Monk B - 19.5mm x 22mm x 19mm Base Info: Redd - Adventurer A - 25mm - Grass Redd - Adventurer B - 25mm - Grass and Dirt Redd - Bare A - 25mm - Grass and Dirt Redd - Bare B - 25mm - Grass Redd - Monk A - 25mm - Grass and Dirt Redd - Monk B - 25mm - Grass Comes in 32mm scale Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Izzy - Bare A - 41mm x 34.5mm x 52.5mm Izzy - Bare B - 36.5mm x 32.5mm x 39mm Izzy - Explorer A - 38.5mm x 47.5mm x 36mm Izzy - Explorer B - 33.5mm x 48mm x 39mm Izzy - Forest Keeper A - 37.5mm x 48mm x 35.5mm Izzy - Forest Keeper B - 43.5mm x 38.5mm x 31.5mm Base Info: Izzy - Bare A - 30mm - Rocks Izzy - Bare B - 30mm - Grass and Dirt Izzy - Explorer A - 30mm - Rocks Izzy - Explorer B - 30mm - Grass and Dirt Izzy - Forest Keeper A - 30mm - Grass and Dirt Izzy - Forest Keeper B - 30mm - Rocks Comes in 32mm scale Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Ynx - Adventurer A - 14.5mm x 16mm x 18.5mm Ynx - Adventurer B - 18.5mm x 24.5mm x 22.5mm Ynx - Alchemist A - 14.5mm x 16.5mm x 18.5mm Ynx - Alchemist B - 16.5mm x 18.5mm x 22.5mm Ynx - Bare A - 12.5mm x 11.5mm x 19mm Ynx - Bare B - 16.5mm x 18.5mm x 22mm Base Info: Ynx - Adventurer A - 15mm - Grass and Dirt Ynx - Adventurer B - 25mm - Grass and Dirt Ynx - Alchemist A - 15mm - Grass and Dirt Ynx - Alchemist B - 25mm - Wood Ynx - Bare A - 15mm - Grass and Dirt Ynx - Bare B - 25mm - Wood Comes in 32mm scale Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Persa - Adventurer A - 19mm x 20.5mm x 16mm Persa - Adventurer B - 20.5mm x 30mm x 15mm Persa - Adventurer C - 18.5mm x 21.5mm x 16.5mm Persa - Apothecary A - 17.5mm x 29mm x 16.5mm Persa - Apothecary B - 20mm x 25mm x 10.5mm Persa - Bare A - 20mm x 23.5mm x 16mm Persa - Bare B - 20mm x 28.5mm x 14.5mm Base Info: Persa - Adventurer A - 25mm - Grass and Dirt Persa - Adventurer B - 25mm - Wood Persa - Adventurer C - 25mm - Grass and Dirt Persa - Apothecary A - 25mm - Wood Persa - Apothecary B - 25mm - Grass and Dirt Persa - Bare A - 25mm - Grass and Dirt Persa - Bare B - 25mm - Wood Comes in 32mm scale Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Munch - Artisan A - 16.5mm x 11mm x 12mm Munch - Artisan B - 20.5mm x 11mm x 10.5mm Munch - Bare A - 18.5mm x 9mm x 13mm Munch - Bare B - 20mm x 11mm x 7.5mm Munch - Wizard A - 18mm x 11.5mm x 13.5mm Munch - Wizard B - 18.5mm x 9.5mm x 12.5mm Base Info: Munch - Artisan A - 15mm - Water Munch - Artisan B - 15mm - Water Munch - Bare A - 15mm - Water Munch - Bare B - 15mm - Grass and Dirt Munch - Wizard A - 15mm - Grass and Dirt Munch - Wizard B - 15mm - Grass and Dirt Comes in 32mm scale Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Bimba - Artificer A - 8.5mm x 18.5mm x 18.5mm Bimba - Artificer B - 11mm x 22mm x 26mm Bimba - Bare A - 9.5mm x 22.5mm x 15mm Bimba - Bare B - 11mm x 19.5mm x 29mm Bimba - Royal A - 13mm x 24mm x 15.5mm Bimba - Royal B - 17.5mm x 22mm x 30mm Base Info: Bimba - Artificer A - 15mm - Grass and Dirt Bimba - Artificer B - 15mm - Grass and Dirt Bimba - Bare A - 15mm - Wood Bimba - Bare B - 15mm - Grass and Dirt Bimba - Royal A - 15mm - Wood Bimba - Royal B - 15mm - Wood Comes in 32mm scale Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Terrix - Adventurer A - 12.5mm x 26.5mm x 19mm Terrix - Adventurer B - 15mm x 31mm x 17mm Terrix - Bare A - 12.5mm x 23.5mm x 19mm Terrix - Bare B - 14.5mm x 30.5mm x 18mm Terrix - Gladiator A - 12.5mm x 25mm x 21mm Terrix - Gladiator B - 15mm x 29.5mm x 20mm Base Info: Terrix - Adventurer A - 25mm - Wood Terrix - Adventurer B - 25mm - Wood Terrix - Bare A - 25mm - Grass Terrix - Bare B - 25mm - Wood Terrix - Gladiator A - 25mm - Grass Terrix - Gladiator B - 25mm - Grass Comes in 32mm scale Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay