All Models

Approximate size: Ou - Bare A - 19.5mm x 26.5mm x 27.5mm Ou - Bare B - 13.5mm x 20.5mm x 19.5mm Ou - Explorer A - 28mm x 27mm x 17.5mm Ou - Explorer B - 24.5mm x 15mm x 15.5mm Ou - Wizard A - 22.5mm x 24.5mm x 18mm Ou - Wizard B - 18.5mm x 11mm x 20mm Base Info: Ou - Bare A - 25mm - Dirt Ou - Bare B - 15mm - Wood Ou - Explorer A - 25mm - Dirt Ou - Explorer B - 25mm - Dirt Ou - Wizard A - 15mm - Wood Ou - Wizard B - 15mm - Wood Comes in 32mm scale Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Blu - Adventurer A - 13mm x 19.5mm x 19.5mm Blu - Adventurer B - 13.5mm x 16.5mm x 17.5mm Blu - Bare A - 14.5mm x 25mm x 19.5mm Blu - Bare B - 25mm x 17.5mm x 17.5mm Blu - Magician A - 17.5mm x 17mm x 18.5mm Blu - Magician B - 20.5mm x 23.5mm x 21mm Base Info: Blu - Adventurer A - 15mm - Dirt Blu - Adventurer B - 15mm - Dirt Blu - Bare A - 15mm - Grass Blu - Bare B - 15mm - Grass Blu - Magician A - 15mm - Grass Blu - Magician B - 15mm - Dirt Comes in 32mm scale Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Aigle - Bare A - 36.5mm x 17.5mm x 33mm Aigle - Bare B - 18.5mm x 17.5mm x 58.5mm Aigle - Explorer A - 35.5mm x 18.5mm x 33.5mm Aigle - Explorer B - 29.5mm x 18mm x 59mm Aigle - Messenger A - 37mm x 19mm x 30.5mm Aigle - Messenger B - 19mm x 20.5mm x 57mm Base Info: Aigle - Bare A - 15mm - Dirt Aigle - Bare B - 25mm - Dirt Aigle - Explorer A - 15mm - Dirt Aigle - Explorer B - 25mm - Dirt Aigle - Messenger A - 15mm - Dirt Aigle - Messenger B - 25mm - Dirt Comes in 32mm scale Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Iama - Alchemist A - 14mm x 25.5mm x 39mm Iama - Alchemist B - 26mm x 36.5mm x 42.5mm Iama - Bare A - 20mm x 31.5mm x 28.5mm Iama - Bare B - 14mm x 25.5mm x 36.5mm Iama - Explorer A - 19.5mm x 37mm x 28.5mm Iama - Explorer B - 25.5mm x 29.5mm x 44mm Base Info: Iama - Alchemist A - 25mm - Grass and Dirt Iama - Alchemist B - 35mm - Grass and Dirt Iama - Bare A - 25mm - Forest Iama - Bare B - 25mm - Forest Iama - Explorer A - 35mm - Forest Iama - Explorer B - 35mm - Grass and Dirt Comes in 32mm scale Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Sloo - Bare A - 21mm x 26mm x 17mm Sloo - Bare B - 30.5mm x 23mm x 30mm Sloo - Explorer A - 20.5mm x 27mm x 21.5mm Sloo - Explorer B - 28mm x 19mm x 29mm Sloo - Shaman A - 29mm x 24mm x 16.5mm Sloo - Shaman B - 15mm x 14.5mm x 22.5mm Base Info: Sloo - Bare A - 25mm - Grass and Dirt Sloo - Bare B - 30mm - Grass and Dirt Sloo - Explorer A - 25mm - Grass and Dirt Sloo - Explorer B - 25mm - Grass and Dirt Sloo - Shaman A - 30mm - Grass and Dirt Sloo - Shaman B - 25mm - Grass and Dirt Comes in 32mm scale Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Kualaa - Alchemist A - 15mm x 10.5mm x 20mm Kualaa - Alchemist B - 15mm x 11.5mm x 17mm Kualaa - Bare A - 13mm x 9.5mm x 12mm Kualaa - Bare B - 12.5mm x 9mm x 22mm Kualaa - Merchant A - 17.5mm x 17mm x 18.5mm Kualaa - Merchant B - 10.5mm x 14mm x 16.5mm Base Info: Kualaa - Alchemist A - 15mm - Wood Kualaa - Alchemist B - 15mm - Wood Kualaa - Bare A - 15mm - Grass and Dirt Kualaa - Bare B - 15mm - Grass and Dirt Kualaa - Merchant A - 15mm - Wood Kualaa - Merchant B - 15mm - Grass and Dirt Comes in 32mm scale Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Got - Bare A - 18.5mm x 30mm x 29.5mm Got - Bare B - 12mm x 25mm x 26mm Got - Explorer A - 19.5mm x 30.5mm x 35mm Got - Explorer B - 13mm x 34mm x 27mm Got - Warrior A - 16.5mm x 26.5mm x 18.5mm Got - Warrior B - 13mm x 25.5mm x 23.5mm Base Info: Got - Bare A - 30mm - Grass and Dirt Got - Bare B - 25mm - Grass and Dirt Got - Explorer A - 30mm - Grass and Dirt Got - Explorer B - 25mm - Grass and Dirt Got - Warrior A - 25mm - Grass and Dirt Got - Warrior B - 25mm - Grass and Dirt Comes in 32mm scale Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Chip - Bare A - 14.5mm x 16.5mm x 14.5mm Chip - Bare B - 9mm x 23.5mm x 11mm Chip - Explorer A - 10mm x 24.5mm x 15mm Chip - Explorer B - 11.5mm x 19.5mm x 14.5mm Chip - Wizard A - 16.5mm x 16.5mm x 17.5mm Chip - Wizard B - 13.5mm x 22.5mm x 15mm Base Info: Chip - Bare A - 15mm - Grass and Dirt Chip - Bare B - 15mm - Grass and Dirt Chip - Explorer A - 15mm - Grass Chip - Explorer B - 15mm - Grass and Dirt Chip - Wizard A - 15mm - Grass Chip - Wizard B - 15mm - Grass Comes in 32mm scale Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Chameo - Bare A - 18mm x 16mm x 11.5mm Chameo - Bare B - 14mm x 10mm x 32.5mm Chameo - Explorer A - 21.5mm x 14mm x 15mm Chameo - Explorer B - 10mm x 18.5mm x 43.5mm Chameo - Wizard A - 11.5mm x 16mm x 8.5mm Chameo - Wizard B - 13.5mm x 17.5mm x 20mm Base Info: Chameo - Bare A - 15mm - Grass and Dirt Chameo - Bare B - 15mm - Grass Chameo - Explorer A - 15mm - Grass and Dirt Chameo - Explorer B - 15mm - Grass Chameo - Wizard A - 15mm - Grass Chameo - Wizard B - 15mm - Grass and Dirt Comes in 32mm scale Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Tao - Bare A - 29.5mm x 39mm x 45mm Tao - Bare B - 26.5mm x 26.5mm x 29.5mm Tao - Collector A - 30.5mm x 35mm x 34mm Tao - Collector B - 45.5mm x 26.5mm x 27mm Tao - Explorer A - 28.5mm x 36mm x 31mm Tao - Explorer B - 22.5mm x 38mm x 29.5mm Base Info: Tao - Bare A - 35mm - Grass and Dirt Tao - Bare B - 35mm - Grass Tao - Collector A - 50mm - Grass and Dirt Tao - Collector B - 35mm - Grass Tao - Explorer A - 35mm - Grass and Dirt Tao - Explorer B - 50mm - Grass Comes in 32mm scale Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Redd - Adventurer A - 16mm x 27mm x 17mm Redd - Adventurer B - 21mm x 21.5mm x 16mm Redd - Bare A - 15.5mm x 29mm x 13mm Redd - Bare B - 20.5mm x 20.5mm x 15mm Redd - Monk A - 15.5mm x 23.5mm x 17mm Redd - Monk B - 19.5mm x 22mm x 19mm Base Info: Redd - Adventurer A - 25mm - Grass Redd - Adventurer B - 25mm - Grass and Dirt Redd - Bare A - 25mm - Grass and Dirt Redd - Bare B - 25mm - Grass Redd - Monk A - 25mm - Grass and Dirt Redd - Monk B - 25mm - Grass Comes in 32mm scale Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Izzy - Bare A - 41mm x 34.5mm x 52.5mm Izzy - Bare B - 36.5mm x 32.5mm x 39mm Izzy - Explorer A - 38.5mm x 47.5mm x 36mm Izzy - Explorer B - 33.5mm x 48mm x 39mm Izzy - Forest Keeper A - 37.5mm x 48mm x 35.5mm Izzy - Forest Keeper B - 43.5mm x 38.5mm x 31.5mm Base Info: Izzy - Bare A - 30mm - Rocks Izzy - Bare B - 30mm - Grass and Dirt Izzy - Explorer A - 30mm - Rocks Izzy - Explorer B - 30mm - Grass and Dirt Izzy - Forest Keeper A - 30mm - Grass and Dirt Izzy - Forest Keeper B - 30mm - Rocks Comes in 32mm scale Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Ynx - Adventurer A - 14.5mm x 16mm x 18.5mm Ynx - Adventurer B - 18.5mm x 24.5mm x 22.5mm Ynx - Alchemist A - 14.5mm x 16.5mm x 18.5mm Ynx - Alchemist B - 16.5mm x 18.5mm x 22.5mm Ynx - Bare A - 12.5mm x 11.5mm x 19mm Ynx - Bare B - 16.5mm x 18.5mm x 22mm Base Info: Ynx - Adventurer A - 15mm - Grass and Dirt Ynx - Adventurer B - 25mm - Grass and Dirt Ynx - Alchemist A - 15mm - Grass and Dirt Ynx - Alchemist B - 25mm - Wood Ynx - Bare A - 15mm - Grass and Dirt Ynx - Bare B - 25mm - Wood Comes in 32mm scale Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Base Info: Siams - Bare A - 35mm - Grass and Dirt Siams - Bare B - 35mm - Wood Siams - Nymph A - 35mm - Grass and Dirt Siams - Nymph B - 35mm - Grass and Dirt Siams - Tribal A - 35mm - Wood Siams - Tribal B - 35mm - Wood Comes in 32mm scale Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Persa - Adventurer A - 19mm x 20.5mm x 16mm Persa - Adventurer B - 20.5mm x 30mm x 15mm Persa - Adventurer C - 18.5mm x 21.5mm x 16.5mm Persa - Apothecary A - 17.5mm x 29mm x 16.5mm Persa - Apothecary B - 20mm x 25mm x 10.5mm Persa - Bare A - 20mm x 23.5mm x 16mm Persa - Bare B - 20mm x 28.5mm x 14.5mm Base Info: Persa - Adventurer A - 25mm - Grass and Dirt Persa - Adventurer B - 25mm - Wood Persa - Adventurer C - 25mm - Grass and Dirt Persa - Apothecary A - 25mm - Wood Persa - Apothecary B - 25mm - Grass and Dirt Persa - Bare A - 25mm - Grass and Dirt Persa - Bare B - 25mm - Wood Comes in 32mm scale Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Munch - Artisan A - 16.5mm x 11mm x 12mm Munch - Artisan B - 20.5mm x 11mm x 10.5mm Munch - Bare A - 18.5mm x 9mm x 13mm Munch - Bare B - 20mm x 11mm x 7.5mm Munch - Wizard A - 18mm x 11.5mm x 13.5mm Munch - Wizard B - 18.5mm x 9.5mm x 12.5mm Base Info: Munch - Artisan A - 15mm - Water Munch - Artisan B - 15mm - Water Munch - Bare A - 15mm - Water Munch - Bare B - 15mm - Grass and Dirt Munch - Wizard A - 15mm - Grass and Dirt Munch - Wizard B - 15mm - Grass and Dirt Comes in 32mm scale Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Maincoo - Bare A - 12mm x 31.5mm x 17.5mm Maincoo - Bare B - 22.5mm x 32mm x 13.5mm Maincoo - Explorer A - 16mm x 28.5mm x 23mm Maincoo - Explorer B - 24.5mm x 33mm x 14.5mm Maincoo - Wizard A - 19.5mm x 25.5mm x 29mm Maincoo - Wizard B - 17.5mm x 20.5mm x 20mm Base Info: Maincoo - Bare A - 30mm - Grass and Dirt Maincoo - Bare B - 30mm - Wood Maincoo - Explorer A - 30mm - Grass and Dirt Maincoo - Explorer B - 30mm - Wood Maincoo - Wizard A - 30mm - Grass and Dirt Maincoo - Wizard B - 30mm - Wood Comes in 32mm scale Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Bimba - Artificer A - 8.5mm x 18.5mm x 18.5mm Bimba - Artificer B - 11mm x 22mm x 26mm Bimba - Bare A - 9.5mm x 22.5mm x 15mm Bimba - Bare B - 11mm x 19.5mm x 29mm Bimba - Royal A - 13mm x 24mm x 15.5mm Bimba - Royal B - 17.5mm x 22mm x 30mm Base Info: Bimba - Artificer A - 15mm - Grass and Dirt Bimba - Artificer B - 15mm - Grass and Dirt Bimba - Bare A - 15mm - Wood Bimba - Bare B - 15mm - Grass and Dirt Bimba - Royal A - 15mm - Wood Bimba - Royal B - 15mm - Wood Comes in 32mm scale Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Terrix - Adventurer A - 12.5mm x 26.5mm x 19mm Terrix - Adventurer B - 15mm x 31mm x 17mm Terrix - Bare A - 12.5mm x 23.5mm x 19mm Terrix - Bare B - 14.5mm x 30.5mm x 18mm Terrix - Gladiator A - 12.5mm x 25mm x 21mm Terrix - Gladiator B - 15mm x 29.5mm x 20mm Base Info: Terrix - Adventurer A - 25mm - Wood Terrix - Adventurer B - 25mm - Wood Terrix - Bare A - 25mm - Grass Terrix - Bare B - 25mm - Wood Terrix - Gladiator A - 25mm - Grass Terrix - Gladiator B - 25mm - Grass Comes in 32mm scale Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Sheppar - Adventurer A - 25.5mm x 38mm x 26.5mm Sheppar - Adventurer B - 19mm x 39.5mm x 31mm Sheppar - Bare A - 26mm x 35mm x 27.5mm Sheppar - Bare B - 20mm x 39.5mm x 30mm Sheppar - Wizard A - 25mm x 38.5mm x 33.5mm Sheppar - Wizard B - 22.5mm x 42.5mm x 34.5mm Base Info: Sheppar - Adventurer A - 35mm - Grass Sheppar - Adventurer B - 35mm - Wood Sheppar - Bare A - 35mm - Grass Sheppar - Bare B - 35mm - Wood Sheppar - Wizard A - 35mm - Wood Sheppar - Wizard B - 35mm - Grass Comes in 32mm scale Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Sabus - Bare A - 13.5mm x 23.5mm x 25mm Sabus - Bare B - 20.5mm x 30mm x 16.5mm Sabus - Explorer A - 16mm x 31mm x 24.5mm Sabus - Explorer B - 15.5mm x 31mm x 20mm Sabus - Warrior A - 18.5mm x 27.5mm x 30mm Sabus - Warrior B - 18.5mm x 30.5mm x 25mm Base Info: Sabus - Bare A - 30mm - Wood Sabus - Bare B - 30mm - Wood Sabus - Explorer A - 30mm - Wood Sabus - Explorer B - 30mm - Grass Sabus - Warrior A - 30mm - Grass Sabus - Warrior B - 30mm - Grass Comes in 32mm scale Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Korg - Bare A - 11.5mm x 16.5mm x 15mm Korg - Bare B - 9.5mm x 8mm x 16.5mm Korg - Explorer A - 12.5mm x 19mm x 13mm Korg - Explorer B - 11.5mm x 19.5mm x 10.5mm Korg - Warrior A - 11.5mm x 23mm x 17.5mm Korg - Warrior B - 13.5mm x 23.5mm x 13.5mm Base Info: Korg - Bare A - 15mm - Grass and Dirt Korg - Bare B - 15mm - Wood Korg - Explorer A - 15mm - Wood Korg - Explorer B - 15mm - Grass and Dirt Korg - Warrior A - 15mm - Wood Korg - Warrior B - 15mm - Grass and Dirt Comes in 32mm scale Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Ingsh - Bare A - 14mm x 22mm x 12.5mm Ingsh - Bare B - 16.5mm x 24.5mm x 7.5mm Ingsh - Explorer A - 19mm x 24.5mm x 14mm Ingsh - Explorer B - 19.5mm x 21.5mm x 22mm Ingsh - Warrior A - 16.5mm x 25.5mm x 20.5mm Ingsh - Warrior B - 14.5mm x 27.5mm x 18.5mm Base Info: Ingsh - Bare A - 25mm - Grass Ingsh - Bare B - 25mm - Wood Ingsh - Explorer A - 25mm - Wood Ingsh - Explorer B - 25mm - Grass Ingsh - Warrior A - 25mm - Wood Ingsh - Warrior B - 25mm - Grass Comes in 32mm scale Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: Gold - Bare A - 17mm x 38mm x 27mm Gold - Bare B - 16.5mm x 32.5mm x 25mm Gold - Explorer A - 18.5mm x 25mm x 24mm Gold - Explorer B - 19.5mm x 37mm x 18.5mm Gold - Rogue A - 17mm x 31.5mm x 31.5mm Gold - Rogue B - 15.5mm x 34.5mm x 25mm Gold - Wizard - 15mm x 31mm x 25.5mm Base Info: Gold - Bare A - 30mm - Grass Gold - Bare B - 30mm - Grass Gold - Explorer A - 30mm - Grass and Dirt Gold - Explorer B - 30mm - Grass and Dirt Gold - Rogue A - 30mm - Grass and Dirt Gold - Rogue B - 30mm - Grass Gold - Wizard - 30mm - Grass and Dirt Comes in 32mm scale Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay

Approximate size: German - Bare A - 15.5mm x 35mm x 26.5mm German - Bare B - 15.5mm x 39mm x 12mm German - Explorer A - 16mm x 35.5mm x 27.5mm German - Explorer B - 17.5mm x 39mm x 12.5mm German - Warrior A - 18.5mm x 33.5mm x 27mm German - Warrior B - 17.5mm x 36mm x 12.5mm Base Info: German - Bare A - 35mm - Grass and Dirt German - Bare B - 35mm - Wood German - Explorer A - 35mm - Grass and Dirt German - Explorer B - 35mm - Grass and Dirt German - Warrior A - 35mm - Wood German - Warrior B - 35mm - Wood Comes in 32mm scale Like this model? Click here to check out the rest of our collection from Cast n Play   Although some renders show bases on the models, models may not always come based. Please be sure to check the available options for each model. If you would like to mix and match, please select a model with “No Base” and pick from our wide selection of bases. All model sizes provided are approximate sizes.   All prints are made to order in the order that they were received. We try to ship all orders within 1-2 weeks. However, this can change based on the volume of orders. If your order is time sensitive, please message us for an estimated timeline. Extremely large prints may require additional time.   All prints are shipped fully cured & unpainted. Ready for you to prime and paint, or just send them right to the table and start adventuring.   The photos shown are renderings of models and printed examples to show scale. Your print may vary slightly. Models will come with little or no support marks and printing blemishes.   Some prints may have multiple components that will require assembly with glue (we would recommend super glue). Most minis will not come attached to the bases. If you do not have super glue, please be sure to grab some in our shop before you check out.   Resinclad LLC is a licensed distributor of these 3D prints designed by: Cast n Play @CastnPlay If you would like to follow or support this artist, please check out the links below. patreon.com/CastnPlay instagram.com/CastnPlay myminifactory.com/users/CastnPlay facebook.com/CastnPlayMinis youtube.com/castnplay